Integrated Circuit

Operation from 2.7 V to 5.0 V Single-Sided Power Supply; No Output Crossover Distortion; Industrial temperature Range: -40C to +85C or Automotive -40C to +125C; Rail-to-Rail Output; Low Quiescent Current; No Output Phase-Reversal from Overdriven Input; NCV prefix for Automotive Qualified Version

Class AB Output Provides Excellent Linearity; Low Input Offset Current: 20 nA Maximum Over Temperature Range; Guaranteed Drift Characteristics; External Frequency Compensation for Flexibility; Output Short Circuit Protection; Pb-Free Packages are Available

Internal Current Limiting with Thermal Shutdown; Low Bias Current; 60 V Load Dump Protection; Input-to-Output Voltage Differential of < 0.6 V @ 100 mA; Economical 5-Lead TO-220 Package with Two Optional Leadforms; -50 V Reverse Transient Protection; Available in Surface Mount SOP-8, D2PAK and DPAK Packages; Output Current in Excess of 100 mA; Ideally Suited for Battery Powered Equipment; Temporary Mirror-Image Protection; High Accuracy (+/-2%) Reference (LM2931AC) Available

Internal Current Limiting with Thermal Shutdown; Low Bias Current; 60 V Load Dump Protection; Input-to-Output Voltage Differential of < 0.6 V @ 100 mA; Economical 5-Lead TO-220 Package with Two Optional Leadforms; -50 V Reverse Transient Protection; Available in Surface Mount SOP-8, D2PAK and DPAK Packages; Output Current in Excess of 100 mA; Ideally Suited for Battery Powered Equipment; Temporary Mirror-Image Protection; High Accuracy (+/-2%) Reference (LM2931AC) Available

Internal Current Limiting with Thermal Shutdown; Low Bias Current; 60 V Load Dump Protection; Input-to-Output Voltage Differential of < 0.6 V @ 100 mA; Economical 5-Lead TO-220 Package with Two Optional Leadforms; -50 V Reverse Transient Protection; Available in Surface Mount SOP-8, D2PAK and DPAK Packages; Output Current in Excess of 100 mA; Ideally Suited for Battery Powered Equipment; Temporary Mirror-Image Protection; High Accuracy (+/-2%) Reference (LM2931AC) Available

Short Circuit Protected Outputs; Low Input Bias Currents; Single Supply Operation: 3.0 V to 32 V ; Single and Split Supply Operation; Internally Compensated; ESD Clamps on the Inputs Increase Ruggedness of the Device without Affecting Operation; True Differential Input Stage; Common Mode Range Extends to Negative Supply; Pb-Free Packages are Available

Low Input Offset Current: 5.0 nA; Low Input Offset Voltage: 2.0 mV (max) LM393A 5.0 mV (max) LM293/393; Low Input Bias Current: 25 nA; Wide Single-Supply Range: 2.0 Vdc to 36 Vdc; Output Voltage Compatible with DTL, ECL, TTL, MOS, and CMOS Logic Levels; ESD Clamps on the Inputs Increase the Ruggedness of the Device without Affecting Performance; Input Common Mode Range to Ground Level; Very Low Current Drain Independent of Supply Voltage: 0.4 mA; Split-Supply Range: +/-1.0 Vdc to +/-18 Vdc; Differential Inp

Use the download button to access the LM2903VDG schematic symbol, PCB footprint, and 3D model.

Low Output Saturation Voltage: 130 mV (Typ) @ 4.0 mA; Single or Split Supply Operation; TTL and CMOS Compatible; Input Common Mode Voltage Range to Gnd; ESD Clamps on the Inputs Increase Reliability without Affecting Device Operation; Low Input Bias Current: 25 nA (Typ); Low Input Offset Current: +/- 5.0 nA (Typ)

Class AB Output Provides Excellent Linearity; Low Input Offset Current: 20 nA Maximum Over Temperature Range; Guaranteed Drift Characteristics; External Frequency Compensation for Flexibility; Output Short Circuit Protection; Pb-Free Packages are Available

Use the download button to access the LC75700T-TLM-E schematic symbol, PCB footprint, and 3D model.

Use the download button to access the LB1973JA-AH schematic symbol, PCB footprint, and 3D model.

0.225 INCH, LEAD FREE, SSOP-16

Use the download button to access the LB1935FA-AH schematic symbol, PCB footprint, and 3D model.

ON Semiconductor LB1848MC-BH is an integrated circuit for electronic assemblies. It is specified around 10 pins for matching footprints and electrical requirements. From inquiry pricing with worldwide shipping support.

MICRO-10

SSOP-30

SSOP-24

ON Semiconductor LA6595T-TLM-E, Fan Controller, 1-Phase Motor Driver, 8-Pin MSOP

±16 kV ESD Protection on Each Channel (IEC6100042 Level 4, Contact Discharge); L/C Values of 17 nH and 12 pF Deliver Exceptional S21 Performance Characteristics of 250 MHz f3dB and -23 dB Stop Band Attenuation from 800 MHz to 6.0 GHz ; Integrated EMI/ESD System Solution in UDFN Package Offers Exceptional Cost, System Reliability and Space Savings; These are PbFree Devices

SOIC-8

MSOP-10

6 or 8 channels of ESD protection; Channel input capacitance matching of 0.02pF typical is ideal for differential signals; Available in SOIC and MSOP, lead-free packaging

ON Semiconductor CAX803TTBI-T3, Voltage Supervisor, 2.5 → 5 V, 3-Pin SOT-23

Use the download button to access the CAT93C56VI-G schematic symbol, PCB footprint, and 3D model.

0.150 INCH, HALOGEN FREE AND ROHS COMPLIANT, MS-012, SOIC-8

Obsolete - Precision Analog Voltage Reference

Precision monitoring of +5.0 V (±5%, ±10%, ±20%), +3.3 V (±5%, ±10%), +3.0 V (±10%) and +2.5 V (±5%) power supplies; Offered in two output configurations: - CAT811: Active LOW reset - CAT812: Active HIGH reset; Manual reset input; Direct replacements for the MAX811 and MAX812 in applications operating over the industrial temperature range; Reset valid down to VCC = 1.0 V; 6 µA power supply current; Power supply transient immunity; Industrial temperature range: -40°C to +85°C; Compact 4-pin SOT143 package

WDFN-6

Obsolete - 150 mA LDO Regulator

Low Dropout Driver 50 mV at 20 mA; No Switching Noise; Shutdown Current less than 1 µA; LED Current set by External Resistor; Dimming via 1-wire EZDim Interface; Thermal Shutdown Protection; 2 LED Current Sinks with Tight Matching; 32 Dimming Levels

TQFN-16

20 MHz (5 V) SPI Compatible; 1.8 V to 5.5 V Supply Voltage Range; SPI Modes (0,0) & (1,1); 64-byte Page Write Buffer; Self-timed Write Cycle; Hardware and Software Protection; Block Write Protection - Protect 1/4, 1/2 or Entire EEPROM Array; Industrial Temperature Range; 100 Year Data Retention; 1,000,000 Program/Erase Cycles; Low Power CMOS Technology; SOIC, TSSOP 8-lead and UDFN 8-pad Packages; This Device is Pb-Free, Halogen Free/BFR Free, and RoHS Compliant

10 MHz SPI compatible; 1.8 V to 5.5 V supply voltage range; SPI modes (0,0) & (1,1); 32-Byte page write buffer; Self-timed write cycle; Hardware and software protection; 1,000,000 program/erase cycles; 100 year data retention; Industrial temperature range; Block write protection - Protect 1/4, 1/2 or all of EEPROM array; Low power CMOS technology; RoHS-compliant SOIC, TSSOP 8-lead and UDFN 8-pad packages

20 MHz (5 V) SPI Compatible; 1.8 V to 5.5 V Supply Voltage Range; SPI Modes (0,0) & (1,1); 64-byte Page Write Buffer; Additional Identification Page with Permanent Write Protection (New Product); Self-timed Write Cycle; Hardware and Software Protection; Block Write Protection - Protect 1/4, 1/2 or Entire EEPROM Array; Low Power CMOS Technology; 1,000,000 Program/Erase Cycles; 100 Year Data Retention; Industrial Temperature Range; 8-lead SOIC, TSSOP and 8-pad UDFN Packages; This Device is Pb-Free, Halogen Fr

ON Semiconductor CAT25256XI EEPROM Memory, 256kbit, 40ns, 1.8 → 5.5 V 8-Pin SOIC

32-byte page write buffer; SPI modes (0,0 & 1,1); 1.8 V to 5.5 V supply voltage range; 10 MHz SPI compatible; Self-timed write cycle; Hardware and software protection; Block write protection - Protect 1/4, 1/2 or all of EEPROM array; Low power CMOS technology; RoHS-compliant 8 lead SOIC, TSSOP and 8-pad UDFN packages; Industrial temperature range; 100 year data retention; 1,000,000 program/erase cycles

20 MHz SPI Compatible; 1.8 V to 5.5 V Operation; Hardware and Software Protection; Low Power CMOS Technology; Industrial Temperature Range; Self-Timed Write Cycle; 64-Byte Page Write Buffer; SPI Modes (0,0 & 1,1); Block Write Protection - Protect 1/4, 1/2 or all of EEPROM Array; 1,000,000 Program/Erase Cycles; 100 Year Data Retention; 8-lead SOIC, TSSOP and 8-pad TDFN, UDFN Packages; This Device is Pb-Free, Halogen Free/BFR Free, and RoHS Compliant; Additional Identification Page with Permanent Write Protec

32-byte page write buffer; SPI modes (0,0 & 1,1); 1.8 V to 5.5 V supply voltage range; 10 MHz SPI compatible; Self-timed write cycle; Hardware and software protection; Block write protection - Protect 1/4, 1/2 or all of EEPROM array; Low power CMOS technology; RoHS-compliant 8 lead SOIC and TSSOP, UDFN 8-pad packages; Industrial temperature range; 100 year data retention; 1,000,000 program/erase cycles

ON Semiconductor CAT25020LI-G EEPROM Memory, 2kbit, 2μs, 1.8 → 5.5 V 8-Pin PDIP

20 MHz (5 V) SPI Compatible; 1.8 V to 5.5 V Supply Voltage Range; SPI Modes (0,0 and 1,1); 16-byte Page Write Buffer; Self-timed Write Cycle; Hardware and Software Protection; Block Write Protection - Protect 1/4, 1/2 or Entire EEPROM Array; Low Power CMOS Tchnology; 8-lead SOIC and TSSOP and 8-pad UDFN packages; Industrial Temperature Range; 100 year Data Retention; 1,000,000 Program/Erase Cycles; These Devices are Pb-Free, Halogen Free/BFR Free and RoHS Compliant

ON Semiconductor CAT24C256XI-T2 EEPROM Memory, 256kbit, 1000ns, 1.8 → 5.5 V 8-Pin SOIC

DIP-8

SC-70, SOT-323, 3 PIN

SC-70, SC-88, 6 PIN

SOIC-20

Compatible with the ISO 11898 standard (ISO 11898-2, ISO 11898-5 and SAE J2284); High speed (up to 1Mbaud); Ideally suited for 12V and 24V industrial and automotive applications; Extremely low current standby mode with wake-up via the bus; Low EME common-mode choke is no longer required; Differential receiver with wide common-mode range (+/- 35V) for high EMS; Voltage source via VSPLIT pin for stabilizing the recessive bus level (further EMC improvement); No disturbance of the bus lines with an un-powered n

0.150 INCH, GREEN, PLASTIC, MS-012AA, SOIC-8

Use the download button to access the AMIS30660CANH2G schematic symbol, PCB footprint, and 3D model.

Monitors up to 5 Voltages; Controls and Monitors up to 4 Fans; High and Low Frequency Fan Drive Signal; 1 On-chip and 2 Remote Temperature Sensors; Extended temp measurement range, up to 191°C; Automatic fan speed control mode controls system cooling based on measured temperature; Enhanced acoustic mode dramatically reduces user perception of changing fan speeds; Thermal protection feature via THERM output; Monitors performance impact of Intel® Pentium®4 processor; Thermal control circuit via THERM input; 3