Integrated Circuit

Adjustable voltage reference

Adjustable micropower shunt voltage reference

Use the download button to access the STM32F765NIH6TR schematic symbol, PCB footprint, and 3D model.

Octal half-bridge driver with SPI control for automotive application

Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 165DMIPS, up to 512KB Flash, 256KB SRAM, SMPS, AES+PKA

Use the download button to access the STM32F446RET6TR schematic symbol, PCB footprint, and 3D model.

32-bit Arm® Cortex®-M7 480MHz MCUs, up to 2MB flash, up to 1MB RAM, 46 com. and analog interfaces

Intelligent quad (2 x 5A/2 x 2.5A) low-side switch

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 128KB flash, 40KB SRAM, analog, ext. SMPS

VND7E025AJTR is an interface IC by STMicroelectronics. Key specs include Date Of Intro: 2018-11-20; Driver Number of Bits: 2. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

High Performance 2A ULDO Linear Regulator

The TS1872AIYDT is a low-power, rail-to-rail input/output operational amplifier operating from a 1.8 V supply with 80 dB typical CMRR, 0.15 µA max bias current, and voltage-feedback architecture in a small outline package. From $1.20 in stock worldwide shipping.

Mainstream Arm Cortex-M4 MCU 170 MHz with 128 Kbytes of Flash memory, Math Accelerator, HR Timer, High Analog level integration

Motor / Motion / Ignition Controllers & Drivers High Volt Ignition

32-bit MCU family built on the Power Architecture® for automotive body electronics applications

32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family

The STM32G431KBT6U is a mainstream ARM Cortex-M4 32-bit MCU running up to 170 MHz with 128 KB Flash and 32 KB SRAM in a 32-pin LQFP package. It integrates a hardware FPU, high-resolution timers, and 12-bit ADC for motor control and digital power applications. From $2.80 in stock with worldwide shipping.

STM32H755IIT6 is a dual-core 32-bit ARM Cortex-M7 and Cortex-M4 microcontroller from STMicroelectronics in LQFP-176 package. Runs at up to 480 MHz with floating-point unit, ADC, DAC, and DMA support. Available from stock with worldwide shipping.

Intelligent high efficiency (class SB) quad BTL ouput with full I2C diagnostics, built in step up and mute input

STM32H743ZIT6U is a high-performance ARM Cortex-M7 microcontroller running at up to 480 MHz with 2 MB Flash and 1 MB RAM. Features dual-bank Flash, rich peripherals, and FPU for demanding real-time applications. Available from $18 in stock with worldwide shipping.

Operational Amplifier, Dual AMP, Bipolar/JFET, 8 Pin, Plastic, DIP

Sensor and Detector Interface 5.5V 106mA 24-Pin QFN EP Reel

The LTC4368CMS-2#PBF is a 100 V over-voltage, under-voltage, over-current, and reverse supply protection controller from Analog Devices with a -3 mV reverse threshold in a 10-pin MSOP package. It provides adjustable thresholds for comprehensive supply rail protection up to 100 V. Suitable for industrial power management, telecom equipment, and automotive systems requiring robust input surge protection.

4-CH, DIFFERENTIAL MULTIPLEXER

Switching Voltage Regulators 1.2A 20V 700kHz Nonsync Step-down

Interface - Signal Buffers, Repeaters Supply Independent I2C Bus Buffer

Comparator Single ±5.5V/11V 8-Pin MSOP T/R

Switching Controllers PWM with 0% to 100% Pulse Width Control

Digital to Analog Converters - DAC 12-Bit Vout DAC SC70 (2.5V ref, reset to mid-scale)

LTC6363IMS8-2#PBF is a Analog Devices integrated circuit for industrial electronics and embedded systems. Key specs include 35 MHz, 8 pins, and TSSOP. From quoted pricing with in stock worldwide shipping support.

Analog to Digital Converters - ADC Quad, 16-Bit, 2Msps/ch Simultaneous Sampling SAR ADC

Switching Controllers PWM with 5% to 95% Pulse Width Control

The LTC6102HVCMS8#PBF is a high-voltage zero-drift current sense amplifier from Analog Devices with a 50 µV maximum input offset voltage and 0.02 µA maximum bias current. It delivers precision shunt-resistor current measurement in high-voltage power systems within an MSOP-8 package.

LDO Voltage Regulators 0.5A Hi PSRR FT LDO 1.8Vo

Analog Devices LT1672IMS8#TRPBF is a precision rail-to-rail input/output op-amp with 2 µA supply current, 96 dB minimum CMRR, and 1 nA maximum bias current. It delivers closed-loop gains above 5 with excellent accuracy for low-power precision signal conditioning. Available in 8-pin MSOP, in stock worldwide with fast shipping.

LTC4095EDC#TRMPBF is a standalone 950 mA USB-compatible linear Li-Ion/Li-Polymer battery charger IC from Analog Devices. It features an adjustable charge threshold, single-channel operation, and a compact 8-pin DFN package, making it ideal for portable consumer electronics and USB-powered devices requiring reliable battery management.

3GHZ TO 20GHZ MICROWAVE MIXER WI

IC CCD SIGNAL PROC 14BIT 28-SOIC

Analog Front End - AFE Battery Formation and Test ASSP

Voltage References uP LDO 5V Reference

Analog Comparators uPower Dual Comparator + 400mV Ref

Current & Power Monitors & Regulators 16-Channel PMBus Power System Manager

LDO Voltage Regulators 45V Vin, Micropower, Low Noise, 200mA LDO with Output Discharge

LDO Voltage Regulators -500mA Ult low noise High Psrr negativ

Power Management Specialized - PMIC Ideal Diode Bridge Controller

IC OPAMP GP 1 CIRCUIT 8DIP

20 V, 500 mA, Low Noise, CMOS LDO

Régulateurs de tension LDO 800mA Single Resistor Rugged Linear Regulator

SP Amp Programmable Amp Single R-R I/O 5.5V Automotive 8-Pin SOIC N T/R

Voltage References Prec Shunt Volt Ref 5V