Integrated Circuit

Value line ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, 128-Kbyte Flash memory, 20-Kbyte SRAM, 512-byte EEPROM, ADC

Use the download button to access the STM32MP157DAD1 schematic symbol, PCB footprint, and 3D model.

Value line ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, 16-Kbyte Flash memory, 2-Kbyte SRAM, 128-byte EEPROM, ADC

Arm® Cortex®-M4 32-bit MCU+FPU, up to 512 KB Flash, 170 MHz / 213 DMIPS, 128 KB SRAM, rich analog, math accelerator, AES

E-TDA7496L is a dual-channel audio power amplifier IC from STMicroelectronics delivering 2 W per channel into 8 ohm loads with a DC voltage-controlled volume adjustment circuit. It operates from a single supply and integrates standby mode in a compact DIP package for low-cost consumer audio equipment. Available from stock worldwide with same-day shipping options.

The STM32F411XC/XE devices are based on the high-performance Arm® Cortex® -M4 32- bit RISC core operating at a frequency of up to 100 MHz. The Cortex®-M4 core features a floating-point unit (FPU) single precision, which supports all Arm single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU), which enhances application security. The STM32F411xC/xE belongs to the STM32 Dynamic Efficiency product line (with produ

TFBGA-265

STMicroelectronics STM32H7B3LIH6QU is a high-performance 32-bit ARM Cortex-M7 microcontroller running up to 280 MHz with 2 MB Flash, 1.4 MB SRAM, and integrated DSP and FPU, offered in a BGA package. Supports dual-bank Flash for live firmware updates, USB HS OTG, and advanced display interfaces including LTDC and DSI. Available from authorized distributors with competitive pricing for graphics-intensive embedded applications.

LQFP-100

Ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, up to 64 KB Flash memory, 8 KB SRAM, 2 KB EEPROM, USB, ADC, DAC

GPS Receiver 1575.42MHz 1.32V/1.89V/3.6V Automotive 56-Pin VFQFPN EP Tray

Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 165 DMIPS, up to 512 KB Flash memory, 256 KB SRAM, SMPS

STM32L073CZU6D is an ultra-low-power 32-bit ARM Cortex-M0+ MCU from STMicroelectronics, featuring up to 192KB Flash, 20KB SRAM, 6KB EEPROM, USB FS, LCD controller, 12-bit ADC, and dual DACs. Packaged in QFN for compact designs. Available worldwide with fast shipping.

STMicroelectronics VIPER115HSTR is a current-mode PWM offline high-voltage switching regulator controller accepting 4.5 V to 30 V input with a 9 V nominal operating point in a compact SO-10 package. It integrates multiple protection features for energy-saving isolated flyback and forward converter designs. Available worldwide through authorized distributors.

UFQFPN-48

VND5E008AYTR-E is a dual-channel high-side driver IC from STMicroelectronics with analog current sense, rated at 5 A maximum output current and built-in over-current, over-voltage, and thermal protection for automotive use. Its 36-pin SSOP package supports compact automotive body control module designs. Available from stock worldwide with same-day shipping options.

32-bit MCU family built on the Power Architecture® for automotive body electronics applications

LQFP-100

LQFP-64

Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 165 DMIPS, up to 512 KB Flash memory, 256 KB SRAM, SMPS

LQFP-48

Dual/triple ultra-low voltage supervisors with push-button reset (with delay option)

LQFP-144

Dual/triple ultra-low voltage supervisors with push-button reset (with delay option)

UFQFPN-32

Use the download button to access the STWLC68JRH schematic symbol, PCB footprint, and 3D model.

STMicroelectronics VND7E040AJTR is a dual-channel automotive high-side driver featuring analog CurrentSense feedback for load diagnostics, designed for 12V automotive systems with integrated protection and fault reporting in a small outline package.

Dual/triple ultra-low voltage supervisors with push-button reset (with delay option)

5.0 V and 3.3/3.0 V secure serial RTC and NVRAM supervisor with tamper detection and 128 bytes of clearable NVRAM

IEEE 802.3at compliant PD interface  Works with power supplied from Ethernet LAN cables or from local auxiliary sources  Successful IEEE802.3at Layer1 classification indicator  Integrated 100 V, 0.45 Ω, 1 A hot-swap MOSFET  Accurate 140 mA typ. inrush current level  Programmable classification current  Programmable DC current limit up to 1 A  Integrated high voltage start-up bias regulator  Thermal shutdown protection  Current mode pulse width modulator  Programmable oscillator frequ

STMicroelectronics TSB712IDT is a precision 36 V rail-to-rail input/output BiCMOS operational amplifier with 6 MHz gain-bandwidth product and 105 dB typical CMRR. It features 0.3 µA maximum bias current at 25°C and internal frequency compensation for stable single-supply operation. Packaged in SOT-23-5 for space-sensitive industrial measurement and signal conditioning applications.

Use the download button to access the STM32H7B3VIH6 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the STM32H7A3VIT6Q schematic symbol, PCB footprint, and 3D model.

Use the download button to access the STM32H7B3ZIT6Q schematic symbol, PCB footprint, and 3D model.

Use the download button to access the STM32H7B0RBT6 schematic symbol, PCB footprint, and 3D model.

Arm® Cortex®-M4 32-bit MCU+FPU, 170 MHz / 213 DMIPS, 128 KB SRAM, rich analog, math acc, 184 ps 12 chan Hi-res timer

32-bit Arm® Cortex®-M7 280 MHz MCUs, up to 2-Mbyte flash memory, 1.4-Mbyte RAM, 46 com. and analog interfaces, SMPS

High-performance and DSP with DP-FPU, Arm Cortex-M7 + Cortex-M4 MCU with 1MBytes of Flash memory, 1MB RAM, 480 MHz CPU, Art Accelerator, L1 cache, external memory interface, large set of peripherals, SMPS, MIPI-DSI

Use the download button to access the STM32H7A3RIT6 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the STM32H7A3LIH6Q schematic symbol, PCB footprint, and 3D model.

8-channel LED driver with direct switch control

IC CODEC/FILTER PROGR 4CH 64TQFP

Arm® Cortex®-M4 32-bit MCU+FPU, up to 512 KB Flash, 170 MHz / 213DMIPS, 128 KB SRAM, rich analog, math accelerator

STMicroelectronics TSV634AIPT is a quad rail-to-rail voltage-feedback operational amplifier with 2 mV maximum input offset voltage, 74 dB typical CMRR, and 0.1 pA bias current in a TSSOP-14 package. Designed for precision signal conditioning in low-power portable and industrial applications. Available from stock with worldwide shipping.

LQFP-32

ARM® Cortex®-M0+ STM32G0 Microcontroller IC 32-Bit Single-Core 64MHz 32KB (32K x 8) FLASH 32-LQFP (7x7)

Arm®-based 32-bit MCU, up to 128 KB Flash, crystal-less USB FS 2.0, CAN, 12 timers, ADC, DAC & comm. interfaces, 2.0 - 3.6 V

High-density value line, advanced Arm®-based 32-bit MCU with 256 to 512 KB Flash, 16 timers, ADC, DAC & 11 comm interfaces

Arm® Cortex®-M0+ 32-bit MCU, up to 64 KB Flash, 8 KB RAM, 2x USART, timers, ADC, comm. I/Fs, AES, RNG, 1.7-3.6V

Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 165DMIPS, up to 512KB Flash, 256KB SRAM, SMPS, AES+PKA