Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
How to Choose Würth Elektronik 150141-Series SMD Indicator LEDs
Choose 150141RS73100 and related Würth 150141 LEDs by color, brightness, 3528 package fit, drive margin, and procurement controls.
Jul 15, 2026
Molex 53398-0371 Selection Guide: Choosing a 3-Circuit Wire-to-Board Header
Choose Molex 53398-0371 by circuit count, mating system, derating, PCB geometry, assembly needs, and exact-suffix sourcing.
Jul 15, 2026
53398-0371 Compact Wire-to-Board Connector Design Guide
Design a reliable 53398-0371 compact wire-to-board interface with proven layout, crimp, strain-relief, and validation practices.
Jul 14, 2026
742792651 Ferrite Bead Selection Guide for EMI and Power Integrity
Choose a 742792651-class ferrite bead by balancing impedance, DC bias, resistance, thermal limits, and filter stability.
Jul 14, 2026
All Integrated Circuit Components
Showing 15,351–15,400 of 77,666
2.7V to 18V Input, Boost Converter with 0.1uA True Shutdown, Short Circuit Protection and Selectable Input Current Limit
LDO Voltage Regulators 20V 200mA LDO 1.8Vo
Battery Management I2C Prog Linear Battery Charger
Switching Voltage Regulators CMOS Micropower Step-Up Switching Regulator
RF Amplifier 1:4 Single Ended Active RF Splitter
Conv DC-DC 3V to 25V Step Down Single-Out 3.3V 1.5A 8-Pin MSOP T/R
Analog to Digital Converters - ADC 24-Bit Power Delta-Sigma ADC
Op Amp, SOP-8,
Switching Voltage Regulators High Efficiency, 140V 400mA Step-Down Regulator
Battery Management High Voltage 2 Amp Monolithic Li-Ion Battery Charger
Security ICs / Authentication ICs PUF ENABLED SHA-3 Secure Authenticator
Processor Supervisor 3.085V/4.675V/Adj 3 Active Low/Open Drain Automotive 8-Pin MSOP
6 DOF PREC IMU, 40G (500 DPS D
SP Amp Current Sense Amp Single 60V Automotive 8-Pin MSOP
Analog Devices SSM2404PZ is a quad SPST analog switch IC optimized for audio applications with ultra-low signal distortion, supporting dual supply voltages from ±5.5 V to ±12 V. It integrates four independent normally-open switches in a 20-pin PDIP package for audio signal routing and mixing. Available RoHS-compliant with worldwide distribution and fast shipping.
LDO Voltage Regulators 3uA Iq, 20mA Low Dropout Linear Regulators
Switching Controllers Low IQ, 60V, High Frequency Synchronous Step-Down Controller
Digital to Analog Converters - DAC 16-Bit SPI Octal DAC (1.25V Reference, 12LSB INL)
Switching Voltage Regulators 125mA, Frequency-Selectable, Switched-Capacitor Voltage Converters
Conv DC-DC 2.65V to 10V Synchronous Step Down Single-Out 0.8V to 10V 0.6A 8-Pin MSOP Tube
Voltage References 7 ppm 0.1% Voltage Reference
Microchip PIC16F747TI/PT is an 8-bit microcontroller in a 44-pin TQFP package, featuring a 20 MHz clock, 36 I/O lines, and integrated ADC. Available in stock with worldwide shipping.
MICROCHIP - PIC16F1455-E/SL - 8 Bit MCU, PIC16 Family PIC16F145x Series Microcontrollers, 48 MHz, 14 KB, 14 Pins, NSOIC
PIC16F1827T-E/MV027 is an 8-bit PIC microcontroller from Microchip featuring nanoWatt XLP ultra-low-power technology with a 20MHz maximum clock and 1.8V to 5.5V operating range. It integrates ADC, DAC channels, and flash memory in a QFN package for cost-sensitive IoT and embedded sensing applications.
• Low Quiescent Current: - 720 µA (maximum)/amplifier • Low Input Offset Voltage: - ±1.6 mV (maximum) • Enhanced EMI Protection • Supply Voltage Range: 1.8V to 5.5V • Gain Bandwidth Product: 10 MHz (typical) • Rail-to-Rail Input/Output • Unity Gain Stable • No Phase Reversal • Quick Start-up Time • Small Packages: - Singles in SC70-5, SOT-23-5 - Dual in SOIC-8, MSOP-8 - Quad in SOIC-14, TSSOP-14 • Extended Temperature Range:-40°C to +125°C • AEC Q100 Qualified, see Section “Product Identifi
12-Bit Digital-to-Analog Converter with EEPROM Memory
ARM Microcontrollers - MCU CM23, ULP, Touch, 512K Flash, 64 Pin TQFP
Use the download button to access the MCP6024T-E/SL schematic symbol, PCB footprint, and 3D model.
1.62V - 3.63V, -40ºC to +85ºC, DC to 48 MHz (PIC32CM LE00/LS00)
Operational Amplifiers - Op Amps Dual, 10MHz Op Amp, E Temp
AVR64DD14 is a low-pin-count 8-bit AVR microcontroller with 64 KB Flash, 8 KB SRAM, and 256 bytes EEPROM running up to 24 MHz. It features a 14-pin package with multiple analog and digital peripherals for embedded control. Ideal for cost-sensitive IoT nodes, sensor interfaces, and industrial automation tasks.
Voltage References 50 ppm 0.1% Voltage Reference
8-bit Microcontrollers - MCU 16KB, 2KB RAM, 14p, 24MHz, MVIO, 12b ADC, ZCD, DAC, 2xUART, SPI, TWI
MIC28500YJL is a high-voltage synchronous buck switching regulator from Microchip Technology, accepting 30 V to 75 V input and delivering up to 9 A peak (4 A continuous rated) at an adjustable output voltage from 0.8 V upward in a 28-pin PowerVQFN package. It targets 48 V bus step-down conversion for telecom equipment, networking gear, and industrial power modules. The device integrates both power switches and gate drivers, reducing external component count for compact, high-efficiency DC-DC designs.
The A2F200M3F-FG256 is a SmartFusion FPGA from Microchip with 200K equivalent gates, 4608 logic cells, and an integrated ARM Cortex-M3 hard processor core running at up to 100 MHz in 130 nm technology. It operates at 1.5 V core voltage and is housed in a 256-pin FBGA package with 117 user I/O pins. Suitable for embedded control, industrial automation, and communication interface bridging applications.
Microchip ATMXT288UD-AMTI2CVAO is an automotive-grade capacitive touchscreen controller supporting 2-key detection in a 56-pin VQFN package, qualified to AEC-Q100. Designed for in-vehicle human-machine interfaces requiring reliable touch performance across wide temperature ranges. Suitable for automotive infotainment panels, HVAC controls, and center console touch displays.
Voltage References 7 ppm 0.1% Voltage Reference
Voltage References 7 ppm 0.1% Voltage Reference
32-bit Microcontrollers - MCU 256KB Flash, 32KB RAM, 79 CoreMark at 25MHz, Low Power microMIPS
Clock Buffer 1:4 LPHCSL Fanout Buffer with output enable (100 Ohm)
The MIC28304-2YMP is a non-isolated point-of-load DC-DC converter module from Microchip delivering up to 3 A output current, adjustable output voltage from 0.9 V to 24 V, and a wide 4.5 V to 70 V input range in a compact 64-pad QFN package.
DIP32 FLASH MEMORY
8-bit Microcontrollers - MCU 28KB Flash, 512B RAM, 128B EEPROM, 12b Diff. ADCC, 1xOP-AMP, 2x16-bit dual PWM
Clock Buffer 1:2 LPHCSL Fanout Buffer with output enable (100 Ohm)
The MCP1702-3002E/CB is a fixed 3.0 V, 250 mA low-dropout linear regulator from Microchip with ultra-low quiescent current, 625 mV typical dropout voltage, and 0.075% load regulation in a compact SOT-23-3 package for battery-powered and IoT sensor applications.
Microchip 090-02789-002 is a Chip Scale Atomic Clock (CSAC-SA65 Option 002) producing a 10 MHz CMOS output with atomic-level frequency stability in a compact through-hole package. It measures 40.64 mm x 35.306 mm x 11.43 mm and provides rise and fall times under 10 ns for precision timing applications. Designed for GPS receivers, military communications, and portable instrumentation requiring ultra-stable frequency references.
8-bit Microcontrollers - MCU 16KB, 8KB RAM, 20p, 24MHz, MVIO, 12b ADC, ZCD, DAC, 2xUART, SPI, TWI
8-bit Microcontrollers - MCU 28KB Flash, 512B RAM, 128B EEPROM, 12b Diff. ADCC, 1xOP-AMP, 2x16-bit dual PWM
Microchip MIC2090-2YM5 is a single-channel current-limiting power distribution switch and load switch IC in a SOT-23-5 package, providing integrated overcurrent protection for USB and system power rails. It features a fixed current limit threshold and enables safe power sequencing with short-circuit protection. Stocked globally for portable electronics, USB power management, and single-board computer power distribution designs.
Microchip DSPIC33CK256MP206I/MR is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 65 pins, 16-Bit, 64-pin in Quad Flat No-Lead. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote