Integrated Circuit

Analog Devices LT1762EMS8-2.5 is a fixed 2.5V positive LDO linear regulator with 150mA output current, 0.27V typical dropout voltage, 3V–20V input range, and 0.005% line regulation in an 8-pin MSOP automotive-grade package. Ideal for precision low-noise reference rails. Available from stock with worldwide shipping.

Switching Voltage Regulators Faster start-up and sampling version of LTM4676

LDO Regulator Pos 3.3V 0.15A Automotive 8-Pin MSOP T/R

LDO Voltage Regulators 3uA Iq, 20mA Low Dropout Linear Regulators

LDO Regulator Pos 5V 0.15A Automotive 8-Pin MSOP

The Analog Devices LT1720IMS8#TR is a dual rail-to-rail output comparator in an 8-pin MSOP package with a 6 V maximum supply voltage and push-pull output stage. It offers 4.5 mV maximum input offset voltage and 6 µA maximum bias current for precision signal comparison. Available from authorized distributors in tape-and-reel format with worldwide shipping.

Digital Phase-Frequency Detector

Instrumentation Amplifiers LTC2053 with External Clock Input

Instrumentation Amplifiers LTC2053 with External Clock Input

The LT1720IMS8 is a dual high-speed comparator with rail-to-rail output, 6V supply range, and 8-pin MSOP package. It features 4.5 mV max input offset voltage and 6 µA max bias current for precision signal detection. Ideal for line receivers, window comparators, and zero-crossing detectors in compact industrial designs.

Supervisory Circuits High Current Overvoltage Protector with Adjustable OVLO W121G1+1

Low-Voltage, Dual DPDT/Quad SPDT Analog Switches in QFN.

Analog Devices MAX17532AUB+ is a 100 mA, 42 V input synchronous buck regulator with ultra-low quiescent current for always-on battery-powered systems. It operates from 4 V to 42 V input, delivers an adjustable output from 0.8 V to 37.8 V, and uses PWM/PFM control in a 10-pin Mini-SO package. Available with worldwide distribution and fast shipping.

60V Synchronous Boost LED Controller

Analogue Switch ICs Precision, SPST, CMOS Analog Switches

LDO Voltage Regulators 45V VIN, 500mA Low Noise, Linear Regulator with Programmable Current Limit and Power Good

Temp Sensor Analog 8-Pin SOIC N T/R

RS-422/RS-485 Interface IC +3V to +5V, 2500VRMS Isolated RS-485/RS-422 Transceivers with 15kV ESD Protection

Analog Switch ICs 60dB 2 Ohm 180MHz CMOS SPST

Analog Devices LTC1967IMS8 is a precision RMS-to-DC converter with 0.15% linearity error in a compact 8-pin MSOP package. Operating on a 2.7 V to 5.5 V supply at only 390 µA, it enables accurate true-RMS measurements in portable instruments. Available from stock worldwide with fast shipping.

Power Management Specialized - PMIC Prec. uPower RMS to DC converter

LDO Regulator Pos 3.3V 1.1A Automotive 8-Pin MSOP EP Tube

Charge Pump INV -1.32V to -5V 20mA 8-Pin MSOP T/R

Charge Pump INV -4.5V 20mA 8-Pin MSOP Tube

Charge Pump INV -4V 20mA 8-Pin MSOP Tube

LDO Voltage Regulators 2ALowVin VeryLow DO low noise high PSSR

LDO Regulator Pos 2.5V 1.1A Automotive 8-Pin MSOP EP Tube

LDO Voltage Regulators LT1965 - 1.1A, Low Noise, Low Dropout Linear Regulator

Conv DC-DC 2.65V to 10V Synchronous Step Down Single-Out 0.8V to 10V 0.6A 8-Pin MSOP

LDO Regulator Pos 1.2V to 19.5V 1.1A Automotive 8-Pin MSOP EP

LDO Voltage Regulators 1.1A, L N, L Drop Lin Reg

Analog Devices LTC1877EMS8#TR is a synchronous step-down DC-DC converter operating from 2.65 V to 10 V input, delivering 0.8 V to 10 V output at up to 0.6 A. Uses current-mode PWM control in a compact 8-pin MSOP package. Available from stock with worldwide shipping.

The LT1965EQ#PBF is a low-noise adjustable LDO linear regulator from Analog Devices delivering up to 1.1 A output current with only 0.31 V typical dropout voltage. It targets noise-sensitive applications such as PLL supplies, ADC references, and RF circuitry in a 5-pin SOT-23 package.

Switching Voltage Regulators

LED Lighting Drivers 60V Step-Down LED Driver

Analog Devices ADG1311YRUZ-REEL7 is a quad SPST analog switch IC operating from a dual ±15 V supply (±13.5 V to ±16.5 V range), housed in a 16-pin TSSOP package for precision signal routing and multiplexing in industrial and instrumentation systems.

Conv DC-DC 3V to 18V Step Down Single-Out 3.3V 0.3A 8-Pin MSOP Tube

MAXIM INTEGRATED PRODUCTS - MAX5066EUI+ - BUCK, 2PH, 5-28V, 25A, 0.61-5.5V,28TSSOP

Digital Signal Processors & Controllers - DSP, DSC 500 MHz 2x SHARC, LQFP Package

RS-422/RS-485 Interface IC +/-15kV ESD-Protected, Fail-Safe, 20Mbps, Slew-Rate-Limited RS-485/RS-422 Transceivers in a SOT

Switching Voltage Regulators Quad-Phase Buck Regulator

RF Transmitter 24GHz 2 Ch ISM-band FMCW transmitter

Improved Precision Micropower Shunt Voltage Reference with Multiple Reverse Breakdown Voltages

Conv DC-DC 3V to 25V Step Down Single-Out 1.8V 1.5A 8-Pin MSOP Tube

Conv DC-DC 3V to 25V Step Down Single-Out 3.3V 1.5A 8-Pin MSOP EP

Conv DC-DC 3V to 25V Step Down Single-Out 1.2V to 20V 1.5A 8-Pin MSOP EP

200mA, 36V DC/DC ?Module (Power Module) Regulator

Conv DC-DC 3V to 25V Step Down Single-Out 5V 1.5A 8-Pin MSOP EP

LED Lighting Drivers 16Port 5.5V Constant Current LED Driver

Conv DC-DC 3V to 25V Step Down Single-Out 5V 1.5A 8-Pin MSOP