Integrated Circuit

IEEE 802.3af/at-Compliant, Powered Device Interface Controllers with Integrated 70W High-Power MOSFET

LTC4300-2CMS8#TRPBF is an I2C bus buffer IC supporting hot swap insertion with level translation between 3.3V and 5V rails, featuring 400kHz fast-mode operation in a compact 8-pin MSOP package.

Analog Devices LTC4300A-2CMS8#PBF is a 2-channel I2C/SMBus hot-swappable bus buffer and repeater in an 8-pin MSOP package. It isolates bus capacitance and enables live card insertion on 2-wire buses operating up to 400 kHz. Available from authorized distributors with global stock and fast shipping.

LINEAR TECHNOLOGY - LTC4300-2IMS8#PBF - IC, HOTSWAP 2WIRE BUS BUFFR, 8MSOP

Analog Devices LTC4300-2CMS8#PBF is a hot-swappable 2-wire I2C/SMBus bus buffer that isolates capacitance and enables live-insertion of cards without corrupting the bus, packaged in an 8-pin MSOP for compact designs.

Interface - Signal Buffers, Repeaters Hot Swappable 2-Wire Bus Bufs

Analog Devices LTC4300A-2IMS8 is a 2-wire I2C hot-swap bus buffer with 2 channels enabling safe card insertion and removal without disrupting the main I2C bus. Packaged in 8-lead MSOP with worldwide availability.

Linear Technology LTC4300A-1CMS8#PBF, Dual, Hot Swap Controller, 2.7 → 5.5 V, 8-Pin, MSOP

Analog Switch ICs Low Voltage 3-wire Serially Controlled O

LT1638IMS8#TRPBF is a dual rail-to-rail input/output general-purpose op-amp by Analog Devices, rated for automotive use on ±22V or 44V single supply. Key specs: 80 dB minimum CMRR, 1500 µV max input offset, 8-pin MSOP package. Available in tape-and-reel with worldwide shipping.

RF Switch SPDT 0MHz to 4GHz 24dB Automotive 8-Pin MSOP EP T/R

Analog Devices MAT14ARZ-R7 is a matched monolithic quad NPN bipolar transistor array in a 14-pin SOIC package offering ultra-low noise and tight parameter matching. It features 40 V collector-emitter voltage, 30 mA maximum collector current, and a minimum DC current gain of 200 hFE for precision analog circuits. Available on 7-inch reel tape for automated assembly with worldwide distribution.

20mA, 3V to 80V Low Dropout Micropower Linear Regulator

ADG701LBRTZ-REEL7 Analog Devices, Analogue Switch Single SPST, 5 V, 6-Pin SOT-23

The Analog Devices LT1777CS#PBF is a low-noise, current-mode PWM step-down switching regulator in a 16-pin SOIC package. It accepts a 7.4 V to 48 V input range and delivers regulated output voltages with minimal EMI, making it ideal for noise-sensitive industrial and telecom power supplies. Available from stock worldwide with lead-free RoHS-compliant construction.

40V, 2A Synchronous Buck-Boost DC/DC Converter

2.5kVRMS Complete Isolated RS-485/RS-422 Module Transceiver + Power

2-Wire Interfaced Low-EMI Key Switch and Sounder Controllers

IC DAS/ADC 10BIT 133K 20SSOP

Interface - Specialized 2-Wire Interfaced Low-EMI Key Switch Controller/GPO

800mA Single Resistor Rugged Linear Regulator

Single 5V RS232/RS485 Multiprotocol Transceiver

2-Wire Interfaced Low-EMI Key Switch and Sounder Controllers

LTC6269HMS8E-10#TRPBF is a precision femtoampere-input op-amp with 4 fA typical bias current and 4 GHz gain-bandwidth product in an MSOP-8 package. It delivers 77 dB typical CMRR and voltage-feedback architecture for demanding transimpedance amplifier designs. Available from authorized distributors with worldwide shipping.

40V, 2A Synchronous Buck-Boost DC/DC Converter

LTC4000IGN-1#PBF is a high voltage, high current battery charging and power management controller from Analog Devices in a 28-pin SSOP package. It supports multi-chemistry battery charging with programmable charge voltage, current, and termination in a single IC. Available with worldwide shipping for demanding energy storage and power management designs.

The LTC1255IS8#PBF is a dual high-side MOSFET driver IC supporting up to 24V switch voltage in an 8-pin SOIC package for power management applications. It provides two independent buffer-based gate drive channels with standard input logic levels, enabling reliable switching of P-channel or N-channel MOSFETs. Available in production quantities with worldwide shipping.

The LTC3115MPFE-2#PBF is a 40V, 2A synchronous buck-boost DC/DC converter IC from Analog Devices. It operates from 2.7V to 40V input and delivers regulated 2V output with pulse-width modulation control. Available from stock worldwide with competitive pricing.

Analog Devices AD5683RBRMZ, Serial DAC, 10-Pin MSOP

Analog Devices ADG836 is a low-voltage dual SPDT analog switch IC operating from 1.8 V to 5.5 V supply rails. Features low on-resistance, fast switching, and rail-to-rail signal handling in a compact SC70 package. Available in stock with worldwide shipping.

● Integrated Protection Increases Robustness • ±65V Fault Tolerant CANH and CANL • ±25kV ESD HBM (Human Body Model) • ±25V Extended Common Mode Input Range (CMR) • Transmitter Dominant Timeout Prevents Lockup • Short-Circuit Protection • Thermal Shutdown ● Family Provides Flexible Design Options • Slow Slew Rate to Minimize EMI • Silent Mode S Disables Transmitter • STBY Input for Low-Current Mode • 1.62V to 5.5V Logic-Supply (VL) Range ● High-Speed Operation of Up to 2Mbps ● Operating Tempera

RF Amplifier 2 Watt pow amp SMT, 6.0 - 9.5 GHz

The MAX3232EESE+ is a ±15kV ESD-protected RS-232 transceiver IC supporting 3.0V to 5.5V supply operation with data rates up to 1Mbps. It features 2 drivers and 2 receivers with ultra-low 10nA shutdown current in a 16-pin SOIC package. Available in stock with worldwide shipping.

The LTC1864LIMS8#TRPBF is a 16-bit single-channel SAR ADC from Analog Devices with 150 ksps sampling rate and serial SPI interface in a compact 8-pin MSOP package. It operates from a 2.7 V to 5 V supply and meets automotive-grade requirements for precision signal acquisition.

Analog Devices LTC3889IUKG#TRPBF is a dual-output synchronous step-down DC/DC controller with PMBus interface, operating from 5 V to 60 V input at 500 kHz switching frequency in a 46-pin QFN package. Current-mode PWM control delivers fast transient response for server, telecom, and industrial power systems.

Analog Devices LTC2348CLX-18#PBF is an octal, 18-bit successive-approximation ADC with 200 ksps per-channel throughput, differential ±10.24 V SoftSpan inputs, and a wide common-mode input range of ±12.5 V. Features integrated SoftSpan programmability for per-channel input range selection and a serial LVDS interface. Available from stock worldwide with competitive pricing and fast global shipping.

Voltage References Precision High-Voltage Reference in SOT23

Supervisory Circuits Low-Voltage, SOT23, P Supervisors with Power-Fail In/Out, Manual Reset, and Watchdog Timer

Analog Devices LTC6256IMS8#PBF is a dual rail-to-rail input/output op-amp with 6.5MHz bandwidth and ultra-low 65µA supply current, operating from 1.8V to 5.25V. Provides precision voltage-feedback amplification with 100dB CMRR and 0.02µA bias current for low-power sensor interfaces. Available worldwide with fast shipping.

Isolated Energy Metering Chipset for Polyphase Shunt Meters

Analog Devices LT3693EMSE#TRPBF is a 36 V input, 3.5 A output current-mode PWM step-down switching regulator operating at up to 2.4 MHz in a compact 10-pin MSOP-E package. Input voltage range spans 3.6 V to 36 V with a nominal 10 V, enabling wide-range power conversion for industrial and automotive designs. Available in tape-and-reel lead-free packaging with worldwide in-stock distribution.

The LTC6256IMS8#TRPBF is a dual general-purpose rail-to-rail input/output op-amp from Analog Devices operating up to 5.25 V with automotive-grade qualification in an 8-pin MSOP package. It offers 100 dB typical CMRR, 0.02 µA bias current at 25°C, and voltage-feedback architecture for precision signal conditioning.

MAXIM INTEGRATED PRODUCTS - MAX16009TG+ - MPU Supervisor, 4 Monitors, 1V-5.5V supply, Active-Low, Open-Drain, 394 mV threshold, TQFN-24

Analog Devices MAX5200BEUB+T is a low-cost, 16-bit voltage-output DAC with an internal reference, communicating via a serial SPI interface in a compact 10-pin µMAX (MSOP) package. It delivers up to 5.25 V analog output with high resolution for precise signal generation. Available from authorized distributors in tape-and-reel packaging with worldwide shipping.

Switching Controllers High-Voltage,Step-Dwn Cntrlr w/Synchronous Rectifier for CPU Pwer

Hot Swap Controller 1-CH 80V N-Channel Positive High Voltage Automotive 8-Pin MSOP T/R

Low-Cost, Voltage-Output, 16-Bit DACs with Internal Reference in ??MAX

Low-Cost, Voltage-Output, 16-Bit DACs with Internal Reference in ??MAX

Analog Devices MAX5203AEUB+ is a 16-bit voltage-output DAC with an integrated internal reference in a 10-pin µMAX (Mini SO) package. It supports a serial SPI-compatible input interface with binary and offset-binary coding, delivering an analog output voltage up to 3.6 V with a maximum linearity error of 0.030517%. Available from authorized distributors with worldwide shipping.

Analog Devices MAX5203BEUB+ is a low-cost, 16-bit voltage-output DAC with an internal reference, offering up to 3.6 V analog output and a maximum linearity error of 0.061% in a compact 10-pin µMAX package. It communicates via a serial SPI interface, simplifying integration with microcontrollers in precision analog systems. Available from authorized distributors with worldwide shipping.