Integrated Circuit

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 1MByte of Flash memory, 1MB RAM, 480 MHz CPU, L1 cache, external memory interface, JPEG codec, large set of peripherals

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 2MBytes of Flash memory, 1MB RAM, 480 MHz CPU, L1 cache, external memory interface, JPEG codec, HW crypto, large set of peripherals

32-bit Power Architecture® microcontroller for automotive SIL3/ASILD chassis and safety applications

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 2MBytes of Flash memory, 692KB RAM, 480 MHz CPU, L1 cache, external memory interface, subset of peripherals

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 2MBytes of Flash memory, 692KB RAM, 480 MHz CPU, L1 cache, external memory interface, subset of peripherals

Ultra-low-power Arm®Cortex®-M4 32-bit MCU+FPU, 150 DMIPS, up to 1-MB Flash memory, 320-KB SRAM, LCD-TFT, ext. SMPS

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 1MBytes of Flash memory, 1376 KB SRAM, 280 MHz CPU, L1 cache, graphic accelerations, external memory interfaces, SMPS and large set of peripherals 225balls TFBGA with SMPS

Ultra-low-power with FPU Arm Cortex-M4 MCU 120 MHz with 2048 kbytes of Flash memory, USB OTG, DFSDM, CHROM-ART, AES-256, HASH

High-performance access line, Arm Cortex-M4 core with DSP and FPU, 1 MByte of Flash memory, 100 MHz CPU, ART Accelerator, DFSDM

Analog Devices LTC3779EFE#TRPBF is an automotive-grade single-output synchronous step-down/step-up DC/DC controller operating from 4.5 V to 150 V input at 275 kHz switching frequency. Current-mode PWM control with output adjustable from 1.2 V to 150 V suits wide input-range 4-switch buck-boost designs. Available in a 31-pin TSSOP-EP package with worldwide stock and shipping.

The LT1965ET-2.5#PBF is a low-dropout linear regulator from Analog Devices delivering 1.1 A output at a fixed 2.5 V with an ultra-low 310 mV typical dropout voltage and 20 V maximum input rating. It features low noise output suitable for sensitive RF and analog circuits. Available from stock worldwide with fast shipping.

Analog Devices LT1712IGN#PBF is a dual rail-to-rail input/output comparator operating from ±3.5V to ±7V supplies in a 16-pin SSOP package. Features 10µA max input bias current and 6mV max offset voltage for precision signal comparison. Available in stock with worldwide shipping.

Voltage References 2.5V 0.60um CMOS 10ppm/C Voltage REF

Op Amp Single Low Noise Amplifier ±5V/10V 8-Pin SOIC N EP T/R

Analog Switch ICs 2.5ohm Max Ron +/-15V iCMOS Dual SPST

Battery Management Low-Cost I C Battery Monitor

Digital Potentiometer ICs 1024tap 5v 50tp, in MSOP SPI I.C.

Linear Voltage Regulators 150mA Ultra-Low Noise LDO 2.8 Vout

The LTC6652AHMS8-2.5#TRPBF is a precision, low-drift, buffered voltage reference IC from Analog Devices with a 2.5 V output. It delivers 0.05% initial accuracy and 5 ppm/°C temperature drift in a compact MSOP-8 package. Available in tape-and-reel packaging for automated assembly with worldwide shipping.

Linear Voltage Regulators 150mA Ultra-Low Noise LDO 3.0 Vout

Precision Amplifiers 2.5nV R-R out Precision BP AMP

Instrumentation Amplifiers

The LTC6652AHMS8-2.5#PBF is a precision fixed 2.5V series voltage reference in an 8-pin MSOP package with ±0.05% initial accuracy. It features ultra-low temperature drift and is designed for high-precision measurement and conversion applications. Available in stock with worldwide shipping.

Analog Devices LTC6652BHMS8-5 is a precision buffered 5 V voltage reference with low drift and ±5 mV output accuracy in an MSOP-8 package. From $6.50 in stock with worldwide shipping.

The LTC6652BHMS8-3#PBF is a high-precision 3V voltage reference IC in an 8-pin MSOP package, delivering 3.000V output with ±0.1% initial accuracy, 5mA output current, and AEC-Q100 automotive-grade qualification. Priced competitively with in stock worldwide shipping available.

0.05 A SWITCHING CONTROLLER, 1000 kHz SWITCHING FREQ-MAX, 10 Pin Plastic SMT

Board Mount Temperature Sensors Thermocouple InAmp

DAC 1-CH Delta-Sigma 16-bit 24-Pin SOIC W Tube

The LTC6652BHMS8-2.5#PBF is a precision 2.5 V voltage reference by Analog Devices, delivering output accuracy of ±0.25 mV (±0.01%) with 5 mA output current in a compact 8-pin MSOP package. AEC-Q100 qualified for automotive applications. Available from authorized distributors worldwide with fast shipping.

Digital Potentiometer 10kOhm 256POS Volatile Linear Automotive 10-Pin MSOP Tube

Analog Devices AD5602 is a single-channel 8-bit digital-to-analog converter operating from 2.7 V to 5.5 V supply with I2C interface in an ultra-compact SC-70 package, ideal for portable and space-constrained analog output applications.

The LTC2064HMS8#TRPBF is a dual zero-drift rail-to-rail input/output op-amp from Analog Devices with 0.02 µA max bias current and 103 dB minimum CMRR in an 8-pin MSOP package. Available from stock worldwide with competitive pricing.

Analog Devices LTC6103HMS8#TRPBF is a dual 60 V automotive-grade current sense amplifier in an MSOP-8 package rated for high-voltage supply monitoring. It delivers 700 µV maximum input offset voltage and 0.17 µA bias current for accurate high-side current measurement. Available from authorized distributors worldwide with in-stock inventory and competitive pricing.

Dual high-side current sense amplifier with 60V common-mode range, 0.35% gain accuracy, and 700µV max offset voltage in 8-Pin MSOP package for automotive applications.

Analog Devices LTC2640ITS8-LM12#TRMPBF is a 12-bit SPI digital-to-analog converter operating from 2.7 V to 5.5 V supply in a compact 8-pin TSOT-23 package. It delivers 0.061% max linearity error with internal reference for precision analog output up to 2.5 V. Available from stock with worldwide shipping.

Analog to Digital Converters - ADC LOW COST 2CHNL 16-6 SIGMA DELTA ADC I.C.

The LT4356CS-1#TRPBF is a single-channel surge stopper and input fault protection controller from Analog Devices in a 16-pin SOIC package. It clamps high-voltage transients and controls an external MOSFET to protect downstream circuits from supply surges exceeding 60V. Features adjustable threshold, SHDN pin, and is ideal for industrial and automotive power line protection.

The LTM8021EV#PBF is a 36V, 500mA step-down DC/DC µModule regulator in a compact LGA package. It operates from 3V to 36V input, delivers adjustable output from 0.8V to 5V, and integrates switching controller, power switches, and passives. Available in stock with worldwide shipping.

Analog Comparators HIGH SPEED COMPARATOR IC

Analog Devices LTC2064IMS8#TRPBF is a dual general-purpose rail-to-rail input/output operational amplifier in an 8-pin MSOP package rated to 5.25 V. It delivers 130 dB typical CMRR and ultra-low 20 pA bias current for precision signal conditioning. Available on tape-and-reel for automated PCB assembly with worldwide distribution.

Analog Devices LTC4300A-2CMS8#TRPBF is a 2-channel I2C bus buffer and hot-swap controller supporting 3.3V and 5V logic levels in an 8-pin MSOP package. It provides bidirectional level translation and bus capacitance buffering for reliable I2C communication across card-edge interfaces. Available from stock with worldwide shipping.

► TIA/EIA RS-485 compliant over full supply range ► 3.0 V to 5.5 V operating voltage range on VCC ► 1.62 V to 5.5 V VIO logic supply option available ► ESD protection on the bus pins ► IEC 61000-4-2 ≥ ±12 kV contact discharge ► IEC 61000-4-2 ≥ ±12 kV air discharge ► HBM ≥ ±30 kV ► Full hot swap support (glitch free power-up/power-down) ► High speed 50 Mbps data rate (ADM3065E/ADM3066E/ ADM3067E/ADM3068E) ► Low speed 500 kbps data rate for long cables (ADM3061E/ ADM3062E/ADM3063E/ADM3064E) ► Full

RS-485 Interface IC 3.0 V to 5.5 V, 12 kV IEC ESD Protected, 500 kbps/50 Mbps RS-485 Transceiver

Instrumentation Amplifiers 40uA Micro Power In Amp

I2C Buffer 3.3V/5V Automotive 8-Pin MSOP T/R

27 GHz to 32 GHz, GaAs, pHEMT, MMIC Power Amplifier

Digital Potentiometer ICs DUALTEMP 50K,3MON TSSOP W/AO/A2 MEMORY

Audio A/D Converter ICs 2-Ch PDM to PCM Converter

Precision, Unity-Gain Differential Amplifier

Analog Devices LTC4300A-3CMS8#TRPBF is a 3.3V/5V I2C logic buffer supporting hot swap operation in an 8-pin MSOP package. It provides bidirectional buffering with adjustable threshold for robust bus communication.