Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
How to Choose Würth Elektronik 150141-Series SMD Indicator LEDs
Choose 150141RS73100 and related Würth 150141 LEDs by color, brightness, 3528 package fit, drive margin, and procurement controls.
Jul 15, 2026
Molex 53398-0371 Selection Guide: Choosing a 3-Circuit Wire-to-Board Header
Choose Molex 53398-0371 by circuit count, mating system, derating, PCB geometry, assembly needs, and exact-suffix sourcing.
Jul 15, 2026
53398-0371 Compact Wire-to-Board Connector Design Guide
Design a reliable 53398-0371 compact wire-to-board interface with proven layout, crimp, strain-relief, and validation practices.
Jul 14, 2026
742792651 Ferrite Bead Selection Guide for EMI and Power Integrity
Choose a 742792651-class ferrite bead by balancing impedance, DC bias, resistance, thermal limits, and filter stability.
Jul 14, 2026
All Integrated Circuit Components
Showing 13,101–13,150 of 77,666
Battery Management LiFePO4 Linear USB Charger in LFCSP Pkg
LDO Voltage Regulators 600mA Ultra-Low-Nois High-PSRR LDO
Analog Devices LT3799EMSE-1#PBF is an offline isolated flyback LED controller with active power factor correction, supporting wide input voltage range and precise LED current regulation. Features integrated PFC control, valley switching, and open/short LED protection in a compact 16-pin MSOP package. Available in stock with worldwide shipping.
Analog Devices LTC3603IMSE#PBF is a current-mode synchronous step-down DC-DC converter with 4.5 V to 15 V input range, adjustable output from 0.6 V to 14.5 V, and 2.5 A continuous output current. Burst mode operation minimizes quiescent current at light loads in a compact MSOP-16E package. Available in stock with worldwide shipping.
IC SWITCH QUAD SPST 16TSSOP
LTC2172IUKG-14#PBF is a low-power quad-channel 14-bit ADC from Analog Devices sampling at up to 65 Msps per channel with a 2 V differential input range. It integrates four simultaneous ADC cores in a 52-lead QFN package for high-density multi-channel signal acquisition. Available from stock worldwide with fast shipping.
The LTC2172IUKG-12#PBF is a 12-bit, 65 Msps quad ADC from Analog Devices featuring ultra-low power consumption and high dynamic range. It offers 4 simultaneous analog input channels with ±2 V input range in a compact 52-pin QFN package. Available from stock with worldwide shipping.
Analog Devices LTM4678IY is a dual 25 A or single 50 A µModule DC/DC regulator with integrated digital power system management operating from 4.5 V to 16 V input. Delivers output voltage adjustable from 0.5 V to 3.4 V with PMBus control and telemetry in a BGA package. Available worldwide with fast shipping from authorized distributors.
Analog Devices MAX15039ETG+T is a 6 A, 2 MHz synchronous step-down switching regulator with integrated switches in a compact 24-pin LFCSP package. It accepts 2.9 V to 5.5 V input and delivers high-efficiency voltage conversion for space-constrained designs. Available in stock worldwide with competitive pricing.
Switching Voltage Regulators 0.8A, Low-Noise, 1MHz, Step-Up DC-DC Converter
Analog Devices LTC6229IMS8E#PBF is a high-speed precision operational amplifier featuring 730 MHz bandwidth, ultra-low noise, and low drift for demanding signal chain applications. It achieves a common-mode rejection ratio of 110 dB and a maximum bias current of 4.1 µA in an MSOP-8 package. Available in stock worldwide with competitive pricing and fast shipping.
Analog Devices LT6005HGN#PBF is a quad precision micropower operational amplifier operating from 1.6 V to 16 V supply voltage with only 1 µA quiescent current per amplifier, in a 16-pin SSOP package. Features 96 dB CMRR and 1800 µV max input offset voltage. Available from stock worldwide with fast shipping.
High-speed voltage-feedback operational amplifier with 730 MHz bandwidth and ultra-low noise. Offers 95 dB minimum CMRR and 4.1 µA max bias current in a compact SOIC-8 package. Available from $8 in stock with worldwide shipping.
Analog to Digital Converters - ADC Configurable, Isolated 10-bit ADCs for Multi-Range Binary Inputs
The ADMW1001BCPZ is a precision analog measurement module from Analog Devices featuring a 3.3 V nominal supply, housed in a 48-pin LFCSP package for industrial condition monitoring. It integrates signal conditioning and measurement functions for sensor interface applications.
Quad/Octal, 2-Wire Serial 8-Bit DACs with Rail-to-Rail Outputs
Analog Devices AD807 is a high-speed comparator with integrated PLL operating from a single 5 V supply in a small outline package. It delivers precise signal comparison and clock recovery for digital communications. Available from stock worldwide with fast shipping.
16-LEAD PLASTIC MSOP
Analog Devices MAT14 is a matched monolithic quad NPN transistor in a small outline package, featuring four devices on a single die for tight parameter matching and excellent thermal tracking. Offering low offset voltage and matched Vbe across all 4 transistors, it is designed for precision differential, logarithmic, and current mirror circuits. Available from authorized distributors with worldwide shipping.
Analog Multiplexer Single 8:1 16-Pin TSSOP Tube
Analog Devices MAX4467ESA+ is a low-cost, micropower microphone preamplifier in an 8-pin SOIC package with 200 kHz bandwidth, 0.02% THD, and complete shutdown capability, ideal for portable audio and voice-sensing applications. Available in stock worldwide with fast shipping.
Analog Devices MAX20343BEWE+ is an ultra-low quiescent current, low-noise 3.5W buck-boost regulator supporting 1.9V to 5.5V input and up to 1A output current in a 16-ball WLCSP package. Ideal for wearables and IoT devices. Available from stock with worldwide shipping.
MMIC Amplifier CATV Amplifier 2200MHz Single 16-Pin QSOP T/R
RF Switch ICs SPDT 10MHz-13GHZ 100ns switching time
Switching Voltage Regulators 4A, 2MHz Step-Down Regulator with Integrated Switches T2444+4
Analog Devices MAX1806EUA18+T is a 500 mA low-dropout linear voltage regulator with a 0.1 V typical dropout voltage and up to 6 V maximum input in an 8-pin uMAX (SOT-23-like) package. It offers both fixed and adjustable output options with 0.0113% maximum line regulation. Available on tape and reel from global distributors.
LT3042MPMSE#PBF is an ultralow-noise, ultrahigh-PSRR adjustable RF LDO linear regulator delivering 200 mA output from up to 20 V input with only 0.22 V typical dropout. Achieves 0.8 µVRMS noise and 79 dB PSRR at 1 MHz for sensitive RF and precision analog circuits. Available from stock with worldwide shipping.
The LTC3769HFE#PBF is a 60 V synchronous boost controller from Analog Devices with PassThru mode, supporting input voltages from 4.5 V to 60 V using voltage-mode PWM control for high-efficiency power conversion. It is housed in a 20-pin TSSOP package with low quiescent current for battery-powered designs. Available from stock worldwide with fast shipping.
Analog to Digital Converters - ADC 3Msps 16-bit Dual Single Ended SAR ADC
Op Amp Single Micropower Amplifier R-R I/O ±2.5V/5V 5-Pin SOT-23 T/R
IC TRNSLTR UNIDIRECTIONAL 10UMAX
CAN Interface IC
ARM Microcontrollers - MCU Precision Analog Front End w/Micro & Com
IC OPAMP GP 1 CIRCUIT 8DIP Low Noise, Precision Operational Amplifier
MAX20335FEWX+T is an ultra-low IQ PMIC with integrated voltage regulators and battery chargers by Analog Devices, designed for small lithium-ion systems. Key specs: 5 power channels, 36-ball WLCSP package, ultra-low quiescent current for extended battery life. Available in stock with worldwide shipping.
Analog Devices HMC6505A is an evaluation PCB assembly for the HMC6505 GaAs MMIC power amplifier, enabling rapid prototyping and characterization across the 5.8 GHz to 8.5 GHz frequency range with on-board bias circuitry and RF connectors. The evaluation board provides 20 dBm output power and 25 dB gain for RF lab assessment. Available from stock with worldwide delivery.
The MAX16821BATI+T is a high-power synchronous half-bridge LED driver with rapid current pulsing capability, housed in a 28-pin LFCSP 5×5×0.75 mm package. Delivers precise high-current LED control for automotive and industrial lighting applications.
Supervisory Circuit with Watchdog, Manual Reset, and Active-Low Push-Pull Reset Output
Analog Devices MAX6034BEXR41+T is a precision, micropower, low-dropout voltage reference in a 3-pin SC70 package with a 4.096 V output. It delivers ±0.1% initial accuracy and ultra-low supply current under 10 µA for battery-powered and portable designs.
ADG1211YCPZ-500RL7 Analog Devices, Analogue Switch Quad SPST, 12 V, 16-Pin LFCSP
HMC336MS8GETR-AN is a GaAs SPDT RF switch IC from Analog Devices (Hittite) operating from DC to 6 GHz with positive control logic, housed in an 8-lead MSOP small outline package. It delivers low insertion loss and high isolation for signal routing in wireless infrastructure, test equipment, and military RF systems. Available through authorized distributors with worldwide shipping.
HMC1160 is a GaAs VCO from Analog Devices (Hittite) covering 8.7 GHz to 9.25 GHz at the RF/2 output, delivering low phase noise in a compact QFN package. It is designed for X-band radar, satellite, and microwave communication frequency synthesis applications.
► Maximum temperature coefficient (TCVOUT): ► 0.8 ppm/°C (D grade 0°C to 70°C) ► 1 ppm/°C (C grade 0°C to 70°C) ► 2 ppm/°C (B grade −40°C to +125°C) ► 4 ppm/°C (A grade −40°C to +125°C) ► Output noise (0.1 Hz to 10 Hz): ► 1 μV p-p at VOUT of 2.048 V typical ► Initial output voltage error: ► B, C, D grade: ±0.02% (maximum) ► Input voltage range: 3 V to 15 V ► Operating temperature: ► A grade and B grade: −40°C to +125°C ► C grade and D grade: 0°C to +70°C ► Output current: +10 mA source/−10 mA s
LTC3533EDE#TRPBF is a 2 A synchronous buck-boost DC-DC converter from Analog Devices with a 1.8 V to 5.5 V input range and PWM voltage-mode control in a compact DFN package. It maintains regulated output whether the input is above, below, or equal to the output voltage, ideal for single-cell Li-Ion power systems. Available from stock worldwide with competitive pricing.
OP Amp Dual GP R-R I/O 5.5V 8-Pin WLCSP
Analog Devices HMC336MS8GE-AN is a GaAs SPDT RF switch IC covering DC to 6 GHz with positive TTL/CMOS control logic in an 8-lead MSOP package. Delivers low insertion loss and high isolation for antenna switching and signal routing applications. Available from authorized distributors with worldwide shipping.
DAC 4-CH Resistor-String 12-bit 10-Pin MSOP Tube Quad, 12-/14-/16-Bit nanoDACs with 5 ppm/°C On-Chip Reference
Current & Power Monitors & Regulators Digital Power-Supply Controller/Monitor with PMBus Interface
RF Switch ICs SPDT Positive Control Swt , DC - 6 GHz
LT6370IMS8#TRPBF is a low-drift, low-noise instrumentation amplifier from Analog Devices in an MSOP-8 package. It features 3.1 MHz bandwidth, 88 dB minimum CMRR, and 35 µV max input offset voltage. Available from stock worldwide with fast shipping.
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote