Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 75,101–75,150 of 77,666
The CD74HCT00E is a quad 2-input NAND gate in the High-Speed CMOS HCT logic family, offering TTL-compatible inputs and 50 pF load drive in a 14-pin DIP package. It delivers reliable logic switching for 5V digital systems with 4 independent gate functions.
CD74HC93E is a 4-bit binary ripple counter from Texas Instruments in a 14-pin DIP package, belonging to the HC CMOS logic family with 50 pF load capacitance tolerance. It counts up in binary and supports cascading for wider counter chains. Available from stock with worldwide shipping.
The CD74HC85E is a 4-bit magnitude comparator IC from Texas Instruments featuring HC CMOS technology with non-inverting outputs and a supply voltage range of 2V to 6V. It provides three comparison outputs (A>B, A=B, A<B) and supports cascading for comparing wider data words. Available in a 16-pin PDIP package, in stock with worldwide shipping.
CD74HC74EE4 is a dual D-type positive-edge-triggered flip-flop IC from Texas Instruments. Features 20 MHz max frequency, 5.2 mA output current, and 50 pF load capacitance in a 14-pin PDIP package. From $0.287, in stock with worldwide shipping.
CD74HC73M is a dual negative-edge-triggered J-K flip-flop IC with reset in a 14-pin SOIC package. Features 20 MHz max frequency, 50 pF load capacitance, and master-slave operation. From $0.45, in stock, worldwide shipping.
The CD74HC73E is a dual J-K flip-flop IC in the High-Speed CMOS HC/UH logic family, operating up to 20 MHz with 6 mA output drive in a 14-pin DIP package. It provides 2 independent clocked flip-flop bits for reliable sequential logic in 2V to 6V CMOS digital systems.
CD74HC640M is a high-speed CMOS octal inverting bus transceiver from Texas Instruments featuring bidirectional data flow, 3-state outputs, direction control, and a 20-pin SOIC package. Enables efficient bidirectional data transfer between buses at HC logic speeds. Available from stock with worldwide shipping.
The CD74HC597EE4 is an 8-stage parallel-in serial-out shift register operating from 2 V to 6 V supply in a 16-pin PDIP package. It supports up to 20 MHz clock frequency with 50 pF load capacitance. Available from stock with worldwide shipping.
The CD74HC541M is a high-speed CMOS logic octal non-inverting buffer and line driver featuring 3-state outputs for bus-driving applications. It offers dual active-low output enable controls, 50 pF load capacitance, and 6 mA output sink current. Available in a 20-pin Small Outline Package with wide operating voltage range and industry-standard pinout.
The CD74HC4538EE4 is a dual retriggerable monostable multivibrator from the HC CMOS logic family, operating from 2 V to 6 V with 5.2 mA output drive and 50 pF load capacitance. Each of its two independent one-shot circuits uses external RC components to set pulse width. Available in a 16-pin PDIP package with worldwide shipping.
CD74HC4538E is a dual retriggerable precision monostable multivibrator in the HC CMOS family, offering 2 independent one-shot channels in a 16-pin DIP package operating at 2 V to 6 V.
CD74HC4520E is a dual 4-bit synchronous binary up-counter IC with high-speed HC CMOS logic, supporting 2V to 6V supply voltage, negative-edge trigger capability, and 50pF load capacitance. Priced from $0.20, available in 16-Pin PDIP with worldwide shipping.
Texas Instruments CD74HC4518E is a dual BCD up-counter with synchronous reset, operating from 2 V to 6 V with 50 pF load capacitance and positive or negative edge trigger in a 16-pin DIP package. Available from stock with worldwide shipping.
Texas Instruments CD74HC4316E is a quad SPST analog switch IC with separate analog and digital supply voltages, supporting 3V to 10V VCC-VEE range and 200 MHz bandwidth in a 16-pin PDIP package. Features four independent single-pole single-throw switches with 6V maximum input voltage. Available from stock with worldwide shipping.
CD74HC4094PWR is an 8-stage shift-and-store bus register with 3-state outputs from Texas Instruments in the HC CMOS logic family. It supports serial-in parallel-out operation at up to 20 MHz clock frequency with 5.2 mA output current in a 16-pin TSSOP package. Available from stock worldwide with fast shipping.
Texas Instruments CD74HC4094E is an 8-stage serial-in parallel-out bus register operating from 2V to 6V supply with 20 MHz maximum clock frequency. Features HC CMOS logic family with 50 pF load capacitance in 16-pin PDIP through-hole package. Available from stock worldwide with fast shipping.
Texas Instruments CD74HC4067E is a high-speed CMOS 16-channel single-ended analog multiplexer and demultiplexer in a 24-pin DIP package. Features 180Ω max on-resistance, 75dB off-state isolation, and 10Ω channel-to-channel resistance matching for precision signal routing. Available from stock with worldwide shipping.
The CD74HC4066EE4 is a Texas Instruments high-speed CMOS quad SPST analog switch array in a 14-pin PDIP package with 200 MHz bandwidth and 2 V to 10 V input voltage range. Each switch operates independently in a 1:1 single-pole single-throw configuration. Available in stock with worldwide shipping.
CD74HC4066E is a high-speed CMOS quad analog switch (SPST) with 200 MHz bandwidth and 2V–10V supply range. Features low on-resistance and high reliability for signal routing. From $0.31, in stock with worldwide shipping.
Texas Instruments CD74HC4060M is a 14-stage binary ripple counter with integrated oscillator, 64 ns propagation delay, and 10 accessible counter outputs, operating from 2 V to 6 V in a 16-pin SOIC package. Available in stock worldwide with competitive pricing.
CD74HC4053E is a triple 2:1 analog multiplexer/demultiplexer IC from Texas Instruments with 3 independent SPDT channels. It supports 3 V to 5 V supply, 180 MHz bandwidth, and comes in a 16-pin DIP package. Available from stock worldwide with fast shipping.
CD74HC4052EE4 is a dual 4:1 analog multiplexer/demultiplexer IC from Texas Instruments, operating from 2V to 10V supply, featuring differential channel switching, low on-resistance, and high noise immunity. Available in 16-pin PDIP package. From $0.24 in stock with worldwide shipping.
The CD74HC4052E is a dual 4:1 analog multiplexer and demultiplexer operating from 3 V to 5 V supply. It provides 2 independent 4-channel single-ended switching sections controlled by a common 2-bit address bus, with a 200 MHz bandwidth and up to 6 V input signal range. Packaged in a 16-pin PDIP, it serves audio routing, analog signal selection, and test instrumentation switching applications.
CD74HC4051E, Multiplexer/Demultiplexer Single 8:1, 3 V, 5 V, 16-Pin, PDIP, 1
The CD74HC4050EE4 is a hex non-inverting buffer and CMOS-to-TTL level translator from Texas Instruments with 6 independent channels operating from 2 V to 6 V supply. It supports 50 pF load capacitance and sinks up to 4 mA per output in a 16-pin PDIP package.
CD74HC4046AE is a high-speed CMOS phase-locked loop (PLL) IC by Texas Instruments in a 16-pin DIP package. Key specs: 2 V to 6 V supply range, on-chip VCO, three phase comparators. From competitive pricing, in stock with worldwide shipping.
Texas Instruments CD74HC4024E is a high-speed CMOS 7-stage binary ripple counter clocked up to 20 MHz with 50 pF load, available in a 14-pin DIP package for easy breadboard prototyping. From $0.35 in stock worldwide shipping.
The CD74HC4016E is a quad SPST analog switch IC from Texas Instruments with four independent 1:1 channels, 200MHz bandwidth, and up to 6V input voltage in a 14-Pin DIP package. Available in stock with worldwide shipping.
The CD74HC4015E is a dual 4-stage serial-in parallel-out shift register in a 16-pin PDIP package, operating from 2 V to 6 V with independent clock and clear inputs per register and a 20 MHz max clock frequency. Available in stock worldwide for logic expansion and data serialization designs.
The CD74HC40103E is an 8-stage presettable binary down counter from Texas Instruments operating from 2 V to 6 V supply with terminal count output and synchronous reset. It supports load/preset input for programmable countdown in a 16-pin PDIP package. Available in stock with worldwide shipping.
CD74HC4002E is a dual 4-input NOR gate IC from Texas Instruments in the HC/UH CMOS logic family, featuring 50 pF load capacitance and 5.2 mA output current. Operates at high speed with low power consumption. From $0.306, in stock worldwide shipping.
The CD74HC390EE4 is a dual 4-stage decade counter/divider IC from Texas Instruments featuring independent divide-by-2 and divide-by-5 functions and 2V to 6V HC CMOS operation. Packaged in a 16-pin PDIP for easy through-hole assembly in frequency division and counting applications. Available from stock worldwide with fast shipping.
The CD74HC366E is a 6-bit HC CMOS 3-state inverting buffer and line driver with dual active-low output enable control, operating from 2V to 6V in a 16-pin PDIP package. It provides high-drive bus buffering with tri-state output isolation for shared bus architectures. Available from Texas Instruments with worldwide distribution.
Texas Instruments CD74HC365E is a 6-bit non-inverting 3-state buffer and line driver in a 16-pin DIP package with dual active-low output enables, operating from 2 V to 6 V HC logic supply. Available in stock worldwide with competitive pricing and fast shipping.
CD74HC30EE4 is a high-speed CMOS 8-input NAND gate from Texas Instruments. Features single-element logic with 50 pF load capacitance and 5.2 mA output current. From $0.341, in stock with worldwide shipping.
CD74HC297E is a high-speed CMOS logic circuit from Texas Instruments in a 16-pin DIP package. It features HC/UH family logic with 52mA output sink current and RoHS-compliant construction. From $1.48, available in stock with worldwide shipping.
CD74HC283E is a 4-bit binary full adder from Texas Instruments featuring full internal lookahead carry for high-speed arithmetic, operating on 2 V to 6 V supply in the HC CMOS logic family. It handles 4-bit binary addition with carry-in and carry-out in a 16-pin DIP package, supporting 50 pF load capacitance and 5.2 mA output sink current. Available from authorized distributors worldwide with immediate stock for digital logic and ALU designs.
Texas Instruments CD74HC259E is an 8-bit addressable latch with 1-to-8 demultiplexer in a 16-pin DIP package. Key specs: HC CMOS family, 2 V to 6 V supply, 8 latched outputs with 5.2 mA sink capability and 50 pF load tolerance. Available from stock with worldwide shipping.
CD74HC238EE4 is a 3-to-8 line decoder from Texas Instruments in the HC CMOS family, expanding 3 binary address inputs to 8 active-high outputs. It supports 50 pF load capacitance, 4 mA output low current, and comes in a through-hole 16-pin DIP package for breadboard and legacy PCB assembly.
Texas Instruments CD74HC237EE4 is a high-speed CMOS 1-of-8 inverting decoder/demultiplexer with latched inputs, operating from 2V to 6V, featuring 3-to-8 line decoding with 5.2mA output drive in a 16-pin PDIP package. Available in stock worldwide.
Texas Instruments CD74HC221EE4 is a dual non-retriggerable monostable multivibrator in 16-pin PDIP with 2 V to 6 V supply range and 5.2 mA output drive. Offers complementary outputs for flexible pulse generation. Available from stock with worldwide shipping.
The CD74HC195E is a 4-stage universal shift register from Texas Instruments in a 16-pin PDIP package. It supports serial/parallel in, parallel out operation with J/K serial inputs, operating from 2V to 6V at up to 20 MHz. Available from authorized distributors with worldwide shipping.
CD74HC191E is a 4-stage synchronous binary up/down counter IC by Texas Instruments with parallel load and RCO ripple carry output. Key specs: 2 V to 6 V supply, 20 MHz max clock, 16-pin PDIP package. From stock with worldwide shipping.
CD74HC190E is a 4-stage bidirectional decade up/down counter IC from Texas Instruments. Operates at 2V to 6V supply, features RCO output, load/preset input, and 50pF load capacitance in a 16-Pin PDIP package. From $0.73 in stock with worldwide shipping.
The CD74HC175E is a high-speed CMOS quad D-type flip-flop with direct clear, operating from 2 V to 6 V and clocked at up to 20 MHz. It stores 4 bits of parallel data in a 16-pin PDIP package with 50 pF load capacitance and 5.2 mA output sink current. Available from Texas Instruments in stock worldwide with fast shipping.
The CD74HC173EE4 is a 4-bit D-type bus interface flip-flop from Texas Instruments in the HC CMOS family, featuring 3-state outputs with dual output enable and a wide 2V to 6V supply range for flexible logic interfacing. It operates in a 16-pin PDIP package and is RoHS compliant for use in modern embedded designs. Available from $0.45 in stock with worldwide shipping.
Shift Register Single 8-Bit 16-Pin PDIP Texas Instruments CD74HC165E, 8-stage, Shift Register, Serial to Serial/Parallel, 2 → 6 V, 16-Pin PDIP
CD74HC157E is a high-speed CMOS quad 2-input multiplexer in a 16-pin DIP package with 50 pF load capacitance and 5.2 mA output drive. From $0.225, in stock worldwide shipping.
The CD74HC154EN is a High-Speed CMOS 4-to-16 Line Decoder/Demultiplexer from Texas Instruments, featuring two enable inputs and a load capacitance of 50 pF. It decodes four binary inputs into one of sixteen active-low output lines for address decoding and data routing. Available in a 24-pin DIP package with worldwide stock and shipping.
CD74HC153E is a dual 4-to-1 data multiplexer from Texas Instruments in the HC/UH high-speed CMOS family, housed in a 16-pin DIP package with 50 pF load capacitance and 5.2 mA output drive. RoHS-compliant and widely available in stock with worldwide shipping.
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote