Integrated Circuit

Octal D type Transperent Latches with 3 state outputs

SN74AC08MDREPG4 is a quadruple 2-input AND gate IC from Texas Instruments in the AC logic family, supporting up to 50 pF load capacitance with 12 mA output current. Available worldwide with fast shipping.

2V to 6V VCC operation • Inputs accept voltages to 6V • Maximum tpd of 7ns at 5V

SN65MLVD205AD is a Multipoint-LVDS line driver and receiver IC from Texas Instruments, supporting EIA-899/TIA-899 interface standards with differential Schmitt trigger inputs. From $2.19, in stock worldwide shipping.

MULTIPOINT-LVDS LINE DRIVER AND RECEIVER

4-CHANNEL HALF-DUPLEX M-LVDS LINE TRANSCEIVERS

Dual Channel USB3.0 Redriver/Equalizer

PECL/ECL 1:2 Fanout Buffer

1:2 PECL/ECL Fanout Buffer • Operating Range – PECL: VCC = 2.375 V to 3.8V With VEE = 0 V – NECL: VCC = 0 V With VEE = –2.375V to –3.8 V • Open Input Default State • Support for Clock Frequencies > 3.0 GHz • 240 ps Typical Propagation Delay • Deterministic Output Value for Open Input Conditions • Q Output Will Default Low When Input Open or at VEE • Built-in Temperature Compensation Table 1. PIN DESCRIPTION • Drop in Compatible to MC10LVEP11, MC100LVEP11 PIN FUNCTION • LVDS Input Compatible

PECL/ECL 1:2 Fanout Buffer VSSOP (DGK) | 8

3.3-V Dual Differential LVPECL/LVDS Buffer to LVTTL Translator

3.3-V Dual Differential LVPECL/LVDS Buffer to LVTTL Translator

Use the download button to access the SN65LVELT23DGK schematic symbol, PCB footprint, and 3D model.

SN65LVELT23D is a low-skew clock driver IC from Texas Instruments featuring 2 outputs, 20pF load capacitance, and LVELT logic. Ideal for clock distribution in high-speed digital systems. From $2.78 in stock with worldwide shipping.

3.3 V Dual LVTTL to DIfferential LVPECL Translator

Dual LVTTL to DIfferential LVPECL Translator

450 ps (typ) Propagation Delay • Data and Clock Transmission Over Backplane • Operating Range: V • Signaling Level Conversion for Clock or Data CC 3.0 V to 3.8 with GND = 0 V • <50 ps (max) Output to Output Skew • Built-in Temperature Compensation • Drop in Compatible to MC100LVELT22

Clock Fanout Buffer (Distribution) IC 1:2 2.9 GHz 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)

3.3-V PECL 1:2 fanout buffer

HIGH-SPEED DIFFERENTIAL LINE RECEIVERS

SN65LVDS9638DGN is a dual-channel, 1500 Mbps LVDS high-speed differential line driver from Texas Instruments, supporting EIA/TIA-644 standard with 2-bit driver output. From $1.41, in stock worldwide shipping.

Quad High Speed Differential Receivers

Quad LVDS Receiver with -2 to 4.4V Common-mode Range

Receiver and Drivers Meet or Exceed the a LVTTL input (respectively) connected to four Requirements of ANSI EIA/TIA-644 Standard differential line drivers that implement the electrical – SN65LVDS105 Receives Low-Voltage TTL characteristics of low-voltage differential signaling (LVTTL) Levels (LVDS). LVDS, as specified in EIA/TIA-644 is a data – SN65LVDS104 Receives Differential Input signaling technique that offers low-power, low-noise Levels, ±100 mV coupling, and switching speeds to transmit data at

2/2 Transceiver Full LVDS 16-TSSOP IC TRANSCEIVER FULL

8-Channel Gigabit Signal Conditioning Buffer

8-Channel Gigabit Signal Conditioning Buffer

Gigabit 8 x 8 CROSSPOINT SWITCH

Use the download button to access the SN65LVCP22PW schematic symbol, PCB footprint, and 3D model.

Gigabit 4 × 4 CROSSPOINT SWITCH

Gigabit 4 × 4 CROSSPOINT SWITCH

SN65LVCP202RGER is a 2-channel LVDS crosspoint switch IC from Texas Instruments with 60 dB off-state isolation and 24-pin VQFN package. It supports high-speed differential signal routing with separate outputs and low power consumption. From $4.05, in stock with worldwide shipping.

High-Speed Controller Area Network (CAN) Transceiver

Automotive Catalog LIN, MOST ECL, and K-Line Physical Interface

3V Full-Duplex RS-485 Driver and Receiver with enables

3.3 V Full-Duplex RS 485 Drivers and Receivers

3.3-V Full-Duplex RS-485 Drivers and Receivers

LOW-POWER RS-485 FULL-DUPLEX DRIVERS/RECEIVERS

Meets or exceeds the requirements of the TIA/ EIA-485A standard • Low quiescent power – 0.3-mA Active mode – 1-nA Shutdown mode • 1/8 Unit load up to 256 nodes on a bus • Bus-pin ESD protection up to 15 kV • Industry-standard SN75176 footprint • Fail-safe receiver (bus open, bus shorted, bus idle) • Glitch-free power-up and power-down bus inputs and output

DeviceNet? CAN Transceivers

CAN TRANSCEIVERS

TRANSCEIVERS

Fault-Protected RS-485 Transceivers with 3.3-V to 5-V Operation

Fault-Protected RS-485 Transceivers with 3.3-V to 5-V Operation

Use the download button to access the SN65HVD12P schematic symbol, PCB footprint, and 3D model.

EMC OPTIMIZED CAN TRANSCEIVER

Designed to Operate at up to 20 Million Data communication networks. Transfers per Second on Each RS-422/RS-485 Channel The SN65HVD09 is characterized for operation over an ambient air temperature range of –40°C to 85°C. • SN65HVD09 Packaged in Thin Shrink Small-Outline Package with 0.5-mm Pin Pitch • ESD Protection on Bus Pins Exceeds 12kV • Low Disabled Supply Current 8 mA Typ • Thermal Shutdown Protection • Positive- and Negative-Current Limiting • Power-Up/Down Glitch Protection

Use the download button to access the SN65EPT23DR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SN65EPT23DGK schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SN65EPT22DR schematic symbol, PCB footprint, and 3D model.