Integrated Circuit

Low voltage, 45MHz, rail-to-rail output operational amplifier

1.2A High Power White LED Driver with I2C Compatible Interface

Dual 1.8V RRIO, 8MHz Amplifier

1A Low Voltage Brushed DC Motor Driver with Speed Regulation (I2C Ctrl)

Use the download button to access the TXS4555RGTR schematic symbol, PCB footprint, and 3D model.

Single Output LDO, 800mA, Fixed and Adj., Internal Current limit, Thermal Overload Protection

1-A, Positive Fixed Voltage, Low-Dropout Regulator

Current & Power Monitors & Regulators Automotive overcurrent protection high-speed, precision current sense amplifier with int. comparator 8-VSSOP -40 to 125

2A Single Input I2C/Standalone Switch-Mode Li-Ion Battery Charger

12-Bit, 200 kSPS ADC, Serial Out, TMS320 Compatible (up to 10MHz), Single Ch.

Dual D-Type Positive-Edge-Triggered Flip-Flops With Clear and Preset

2-Channel, 2:1 Analog Switch with Low On-State Resistance (1Ω) and Powered Off Protection

Scan Test Devices With 18-Bit Transceivers And Registers

Enhanced Product Dual Inverter Buffer/Driver With Open-Drain Output

3-V to 5.5-V Single-Channel RS-232 Line Driver/Receiver With +/-15-kV ESD Protection

Nanopower Supervisory Circuits for Automotive

12-Bit Micro Power, RRO Digital-to-Analog Converter

12-Bit, 80-MSPS, 1.0-GHz Input Bandwidth Analog-to-Digital Converter (ADC)

Automotive 6-Bit, 1-of-2 Mux/Demux with 240 MHz Bandwidth

Use the download button to access the TPS2055AD schematic symbol, PCB footprint, and 3D model.

Dual Rail-To-Rail Micropower Operational Amplifier

5.5V, 15A, 4.4mΩ Load Switch with Quick Output Discharge

2 Watt Audio Power Amplifier with Selectable Shutdown Logic Level

Two-Port High-Speed 480Mbps USB 2.0 Hub

3V-17V 1A Automotive Step-Down Converters in 2x2SON

±4°C analog output temperature sensor, with -11.77mV/°C gain

8-Bit 2.5-V/3.3-V Low-Voltage FET Bus Switch

150-mA, 40-V VIN, ultra-low-IQ low-dropout (LDO) regulator

60V, High-Side, Current Output Current Sense Amplifier

Automotive Catalog High-Speed Differential Line Drivers and Receivers

3A FlexCap Low Dropout Linear Regulator for 2.7V to 5.5V Inputs

8-Bit FET Bus Switch 2.5-V/3.3-V Low-Voltage High-Bandwidth Bus Switch

8-Bit 2.5-V/3.3-V Low-Voltage FET Bus Switch

Low Noise, High-Bandwidth PSRR Low-Dropout 150mA Linear Regulator for Automotive Applications

Use the download button to access the CSD97396Q4M schematic symbol and PCB footprint.

50kHz switched capacitor voltage converter

Conv DC-DC 4.5V to 18V Step Down Dual-Out 0.76V to 7V 4A/2A 16-Pin HTSSOP EP T/R

EMB1499QMHE/NOPB is a bidirectional current-mode DC/DC controller for battery management systems by Texas Instruments. Key specs: 5.5 V max input, single-channel current-mode control, 28-pin SOIC package supporting both charge and discharge paths. From $4.20, in stock with worldwide shipping.

Use the download button to access the REF3120AQDBZRQ1 schematic symbol, PCB footprint, and 3D model.

3-Line to 8-Line Decoder / Demultiplexer

36V, Low Power, RRO, General Purpose Operational Amplifier

3A SIMPLE SWITCHER® Power Module with 20V Maximum Input Voltage

Low Voltage I2S Stereo Headphone Amplifier and Volume Control

Delfino™ 32-bit MCU with 800 MIPS, 2xCPU, 2xCLA, FPU, TMU, 1024 KB Flash, EMIF, 12b ADC

11-Bit, 125-MSPS Analog-to-Digital Converter (ADC)

300-mA 40-V low-dropout (LDO) regulator with 25-μA quiescent current

High-Output-Drive Operational Amplifier

The SN74LV125ADGVR is a quad 3-state bus buffer from Texas Instruments in the LV/LV-A logic family, featuring active-low output enable control, unidirectional 16mA output drive, and 50pF load capacitance for reliable signal buffering. It operates across a 1.65V to 5.5V supply range in a 14-pin SOIC package in tape-and-reel format. Stocked by global distributors with worldwide shipping available.

3.3-V ABT Octal Buffers/Drivers With 3-State Outputs

Voltage Monitor With Watchdog Timer for Automotive