Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 62,001–62,050 of 77,666
Ultralow-Noise, High PSRR, Fast RF 100-mA Low-Dropout Linear Regulators
Precision Micropower Shunt Voltage Reference
16-Bit Transparent D-Type Latch With 3-State Outputs
High-Voltage, High-Current Darlington Transistor Arrays
The CD74HC40105E is a Texas Instruments high-speed CMOS 4-bit by 16-word FIFO register with 64-bit memory density in a 16-pin PDIP package. It supports a maximum clock frequency of 10 MHz with 2250 ns access time and 500 ns cycle time. Available in stock with worldwide shipping.
Automotive 4V to 40V Dual Synchronous Buck Controller, 2A Buck Converter, and 300mA LDO
Use the download button to access the TPS2042BQDRQ1 schematic symbol, PCB footprint, and 3D model.
Use the download button to access the TPS54328DDAR schematic symbol, PCB footprint, and 3D model.
Use the download button to access the BQ51020YFPR schematic symbol, PCB footprint, and 3D model.
INDUSTRIAL CAN TRANSCEIVERS
Dual 550-uA/channel, 3MHz, RRIO op amp with shutdown
Use the download button to access the TPS75833KC schematic symbol, PCB footprint, and 3D model.
Use the download button to access the FDC2112QDNTRQ1 schematic symbol, PCB footprint, and 3D model.
Dual CMOS Rail-to-Rail Input and Output Operational Amplifier
Use the download button to access the TLC5954RTQR schematic symbol, PCB footprint, and 3D model.
Dual-Output, 2-A/1-A Low Dropout Voltage Regulators with Integrated SVS
The OPA341NA/3K is a single rail-to-rail input/output low-power operational amplifier from Texas Instruments, featuring 5.5MHz bandwidth, 90dB CMRR, and an ultra-low bias current of 10pA at 25C in a compact 6-pin SOT-23 package. It is RoHS-compliant with a 15-year product longevity commitment. Available from stock with worldwide shipping.
Octal Buffers/Drivers With 3-State Outputs
The LM5114BSD/NOPB is a single-channel low-side MOSFET gate driver from Texas Instruments with Schmitt trigger input and open-drain output, supporting high-speed switching in a compact 6-pin SON package. It drives N-channel MOSFETs with up to 7.6 A peak output current for fast switching applications. RoHS-compliant with e3 moisture sensitivity rating.
The OPA4277MDTEP is a quad high-precision voltage-feedback operational amplifier from Texas Instruments' Enhanced Products line, housed in a small-outline package. It offers a low 65µV maximum input offset voltage and 140dB common-mode rejection ratio for precision analog signal conditioning.
Use the download button to access the SN74CB3Q3251DBQR schematic symbol, PCB footprint, and 3D model.
Use the download button to access the SN74GTL2010PWR schematic symbol, PCB footprint, and 3D model.
Use the download button to access the SN74CBTLV3251DBQR schematic symbol, PCB footprint, and 3D model.
The TPD1S514-1YZR is a single-channel USB Power Delivery protection IC from Texas Instruments combining overvoltage, surge, and ESD protection in one device. It guards USB PD ports against damaging transients with a fixed threshold and a compact 12-bump BGA package for space-constrained designs. Available from stock worldwide with competitive pricing.
Dual-Channel, Current-Limited, Power-Distribution Switch
Single Positive-Edge-Triggered D-Type Flip-Flop
16-Bit, 680-kSPS, Serial Interface, uPower, Miniature, Single-Ended, Differential Input SAR ADC
Ultra-Low Power, Supply Voltage Supervisor
SOP-5
Hex Inverter
Use the download button to access the DAC7614UB schematic symbol, PCB footprint, and 3D model.
Precision Micropower Shunt Voltage Reference
Switch-mode Li-Ion Charge Controller
Hex Inverter Buffers/Drivers With Open-Drain Outputs
Wideband, Low-Distortion Fully Differential Amplifier
Low-Dropout System Voltage Regulator with Delayed Rest
300 mW Audio Power Amplifier with Shutdown Mode
The CD4078BNSR is a CMOS 8-Input NOR/OR Gate from Texas Instruments in a 14-pin SOIC package. It supports 8 logic inputs with a maximum output current of 6.8 mA and 50 pF load capacitance. Available from stock with worldwide shipping.
LMP8672MA/NOPB is an operational amplifier by Texas Instruments. Key specs include Average Bias Current-Max (IIB): 0.25 µA; Bias Current-Max (IIB) @25C: 0.2 µA. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.
4-A, 6-A, 2.5-kVRMS Isolated Dual-Channel Gate Driver With Single Input in LGA
2-Channel Power Management IC (PMIC) with Battery Charger, One Step-Down Converter and One LDO
Single-output 3A LDO regulator, adj (0.8V to 3.3V), fast transient response, programmable soft start
DS90LT012AQMFX/NOPB is an automotive-grade LVDS differential line receiver supporting EIA-644-A/TIA-644-A standards with a 1.9 V minimum output swing in a compact SOT-23 5-pin package. From $0.50 in stock worldwide shipping.
Use the download button to access the TPS54200DDCT schematic symbol, PCB footprint, and 3D model.
CMOS Quad NOR R/S Latch with 3-State Outputs
Dual USB Dedicated Charging Port Controllers
4.5V to 23V Input, 2-A Synchronous Step-Down Converter with Eco-Mode
Automotive Precision, ±250mV Input, 3µs Delay, Reinforced Isolated Amplifier
Use the download button to access the TLC59211IN schematic symbol, PCB footprint, and 3D model.
Use the download button to access the SN74LVC126ARGYR schematic symbol, PCB footprint, and 3D model.
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote