Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 60,301–60,350 of 77,666
Op Amp Dual GP R-R I/O ±6V/12V Automotive 8-Pin PDIP Tube
TEXAS INSTRUMENTS - OPA4234UG4 . - Operational Amplifier, Quad, 4 Amplifier, 350 kHz, 0.2 V/µs, ± 1.35V to ± 18V, SOIC, 14 Pins
USB Power SW Hi Side/DIST Single 6.5V 0.1A to 1.1A 6-Pin SOT-23 T/R
TEXAS INSTRUMENTS - LM340AT-5.0 - Linear Voltage Regulator, Fixed, Positive, 7.5V To 35V In, 5V And 1A Out, TO-220-3
The TPS2557QDRBTQ1 is an automotive-grade single-channel load switch IC from Texas Instruments. Features adjustable current limiting, 2.5V to 6.5V input range, and AEC-Q100 qualification. Housed in a compact 8-pin SON package for automotive and industrial power management.
Fast Charge Management Li-Ion/NiCD/NiMH Packs 2000mA 8-Pin SOIC Tube
Inverter 6-Element CMOS 14-Pin PDIP Tube
LDO Regulator Pos 1.8V 0.4A 6-Pin(5+Tab) SOT-223 T/R
Logic Gates Quadruple 2-Input Positive-AND Gate
LDO Voltage Regulators Sgl Output 150mA Fixed(3.0V) Lo Quies
OP Amp Dual GP 16V 8-Pin SOP Tube
The TAS5706APAPG4 is a 2-channel stereo Class-D audio power amplifier from Texas Instruments delivering 20.6W output power with 20kHz audio bandwidth, supporting mono, stereo, and 4-channel BTL configurations. It features a 64-pin HTQFP exposed-pad package with RoHS e4 compliance for high-efficiency audio amplification. Available in stock worldwide for consumer audio and multimedia system designs.
The TPS6208818YFPT is a 3A step-down switching regulator from Texas Instruments in an ultra-compact 1.2 mm x 0.8 mm 6-pin WCSP package. It accepts input voltages from 2.4 V to 5.5 V and uses PWM current/voltage-mode control for efficient power conversion. Available from stock with worldwide shipping.
Audio Amp Headphone/Speaker 1-CH Mono/2-CH Stereo/4-CH Stereo 20.6W Class-D 64-Pin HTQFP EP T/R
TEXAS INSTRUMENTS - OPA2353EA. - OP AMP, DUAL CMOS RRI/O, SMD, 2353
Board Mount Temperature Sensors A 926-LM60BIM3X/NOPB
TEXAS INSTRUMENTS - LMC555CN - Timer, Oscillator & Pulse Generator IC, Astable, Monostable, TTL, 3 MHz, 1.5 V to 15 V, DIP-8
Operational Amplifiers - Op Amps Quad Low-Noise JFET-Input
Texas Instruments TLV5638QDREP is a dual-channel 12-bit serial-input DAC with 1 µs settling time and up to 5.1 V analog output voltage. It features a military-enhanced qualification grade and SPI-compatible serial interface in an SOIC-8 package. Ideal for precision industrial and control applications requiring reliable long-term availability.
TEXAS INSTRUMENTS - DAC8802IPWG4 . - IC, 14BIT DAC DUAL MULTIPLYING, SMD
Texas Instruments TPS40021PWP is a voltage-mode PWM buck controller with 2.25 V to 5.5 V input range. It supports pulse width modulation in a compact 16-pin HTSSOP package. Available from stock with worldwide shipping.
Digital to Analog Converters - DAC Dual Serial Input 14-Bit Multiplying
Dual automotive 36-V, precision, rail-to-rail input output, low offset voltage op amp
Texas Instruments LP2980IM5ADJNOPB is a SEARAY high-speed board-to-board array connector. It provides 5 positions on a .050 in pitch open-pin-field terminal. From inquiry pricing, request current stock for worldwide shipping.
The CD74ACT541EE4 is an 8-channel non-inverting tri-state CMOS bus driver and buffer from Texas Instruments' ACT logic family. It features dual active-low output enables, drives 50pF loads, and comes in a through-hole 20-pin PDIP package. Available in stock from authorized distributors with worldwide shipping.
Texas Instruments TPS61041DRVRG4 is a miniature boost DC/DC converter with 1.8 V to 6 V input and adjustable output up to 28 V at 50 mA. Uses pulse-frequency modulation current-mode control for high efficiency at light loads in a 6-pin WSON package. Available in stock worldwide with fast shipping.
Conv DC-DC 1.8V to 6V Step Up Single-Out 1.8V to 28V 0.05A 6-Pin WSON EP T/R
LDO Voltage Regulators High PSRR Fast RF High-Enable 100mA
Texas Instruments PUCC5310 is a single-channel isolated gate driver delivering 2A source and 1A sink current with an integrated Miller clamp. It includes under-voltage lockout and transient protection in a compact 8-pin SOP package. Designed for IGBT and SiC MOSFET switching in power conversion and motor drive applications.
Use the download button to access the TPS6208812YFPT schematic symbol, PCB footprint, and 3D model.
GREEN, PLASTIC, SOT-323, SC-70, 5 PIN
Analog to Digital Converters - ADC 24-Bit, 2kSPS, 4-Ch, Low-Power Delta-Sigma ADC With PGA, Voltage Reference, IDACs and I2C Interface 16-TSSOP -40 to 125
RS-232 Interface IC 3-5.5V Multich RS- 232 Line Drvr/Rcvr
600mA, High-Efficiency MicroSiP™ Step-Down Converter Module (Profile <1.0mm).
CC2511F32RSPG3 is a 2.4GHz USB-enabled RF system-on-chip by Texas Instruments based on an 8051 core with 32KB flash memory. Key specs: 2.4GHz ISM band transceiver, USB 2.0 full-speed interface, 36-pin VQFN package. From $4.20, in stock with worldwide shipping.
The CD4031BEG4 is a 64-stage static CMOS shift register IC from Texas Instruments in a 16-pin DIP package. It supports serial-in/serial-out data shifting with static operation down to DC clock rates for flexible timing. Available from stock worldwide with fast shipping for digital logic and data storage applications.
Texas Instruments LM4040A20IDCKRE4 is a precision 2.048 V micro-power shunt voltage reference with 0.1% initial accuracy, two-terminal operation, and output range of 2.046 V to 2.050 V, packaged in a 5-pin SOT-23 for compact ADC and DAC reference applications. Available worldwide.
Precision micropower shunt voltage reference
Linear Charge Management Li-Ion/Li-Pol 500mA 4.1V 8-Pin HVSSOP EP T/R
Analog Comparators Quad Micropower Push-Pull Output
OP Amp Dual GP ±18V 8-Pin SOIC Tube
TEXAS INSTRUMENTS - MSP430FR2633IYQWT - MCU, MSP430, 16BIT, 16MHZ, DSBGA-24
Operational Amplifiers - Op Amps Quad 6.5MHz 585uA R-to-R I/O CMOS
LMV331M7X NOPB is a single-channel low-voltage comparator by Texas Instruments in a compact 5-pin SC-70 package. Key specs: 5 V supply voltage, open-drain output, rail-to-rail input capability. From competitive pricing, in stock with worldwide shipping.
2.7V to 18V, 4A, 34mΩ eFuse with fast overvoltage protection
LDO Regulator Pos 1.25V to 13.7V 0.8A 4-Pin(3+Tab) SOT-223 Tube
MCU 16-bit MSP430 RISC 256KB FRAM 3.3V 100-Pin LQFP T/R
The CD74HC74MTE4 contains two independent positive-edge-triggered D-type flip-flops with preset and clear, operating up to 20 MHz and supplied in a 14-pin SOIC package on tape and reel. Each element includes complementary Q and Q-bar outputs for direct use in registers, frequency dividers, and state machines. Available from major distributors with worldwide shipping.
Charge Pump STPUP 1.8V to 3.6V/3.3V 40mA/20mA 10-Pin VSSOP Tube
16-bit fixed-point digital signal processor running at 80 MHz with a 23-bit address bus, barrel shifter, and multiple internal buses for high-throughput DSP tasks. Requires both 3.3 V and core supply for dual-voltage operation in telecom and audio systems. Available from stock with worldwide shipping.
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote