Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 57,901–57,950 of 77,666
Texas Instruments TPA301DG4 is a single-channel Class-AB audio power amplifier delivering 0.7 W output power with 0.5% harmonic distortion. It supports a 20 kHz audio bandwidth for full-range speaker drive and is housed in an 8-pin SOIC package. Suitable for battery-powered portable audio devices requiring compact mono amplification.
Isolation Amplifiers 200 KHZ REINFORCED ISOLATED AMPLIFIER
RS-422/RS-485 Interface IC Quad RS-485 Diff Line Driver
The LF298MX is a monolithic sample and hold amplifier IC from Texas Instruments with a 10 µs typical acquisition time and 3 mV maximum hold offset voltage. It accepts analog input voltages of ±11.5 V, operates from -25°C to 85°C, and is packaged in a 14-pin SOIC for precision data acquisition applications.
Audio Amp Microphone 1-CH Mono Class-AB 28-Pin SSOP T/R
10:1 LVDS Serdes Transmitter 100 - 660Mbps
TEXAS INSTRUMENTS - THVD1551DGK - RS485 TRANSCEIVER, 50MBPS, VSSOP-8
TL062CDRE4 is a dual low-noise JFET-input operational amplifier by Texas Instruments, featuring 70dB minimum CMRR and 0.0002µA maximum input offset current in an 8-pin small outline package. Key specs: dual op-amp, JFET inputs, 70dB min CMRR, 10nA max bias current. Available in stock with worldwide shipping.
The TPS79933DRVRG4 is a fixed 3.3 V low-dropout (LDO) linear voltage regulator delivering up to 200 mA output current with a typical dropout voltage of only 100 mV. It features excellent AC performance, low noise output, and an enable pin for power sequencing, housed in a compact 6-pin WSON package with exposed pad for enhanced thermal dissipation. Suitable for noise-sensitive portable and battery-powered applications.
VC55GPSZHH is a 40-bit fixed-point digital signal processor by Texas Instruments, operating at up to 20MHz clock frequency with a 16-bit external data bus and boundary scan support, housed in a 179-ball BGA package. Key specs: 40-bit fixed-point DSP, 20MHz max clock, 16-bit external bus, -40°C to +85°C range. Available in stock worldwide.
The TMS320VC5509AGHHR is a fixed-point 40-bit automotive-grade DSP from Texas Instruments delivering 400 MIPS at 200 MHz with a 21-bit address bus and 16-bit external data bus, housed in a 179-pin BGA MICROSTAR package. It supports 1.2V and 1.35V supply options for ultra-low-power operation and includes JTAG boundary scan for manufacturing test. Ideal for automotive infotainment, telematics, and embedded audio/voice processing applications.
Operational Amplifiers - Op Amps 10-MHz L-N L-V L-P
Conv DC-DC 3V to 17V Step Down Single-Out 5V 1A Automotive 16-Pin VQFN EP T/R
10MHz, CMOS, Zero-Drift, Zero-Crossover, True RRIO Precision Operational Amplifier
3-V to 5-V Multichannel RS-232 Line Driver/Receiver w/ +/-15-kV ESD Protection
LDO Regulator Pos 5V 0.15A Automotive 5-Pin SOT-23 T/R
SP Amp Limiting Amp Single 3.6V 16-Pin VQFN EP T/R
Single Micropower, 2.5-V, RRIO, Single Supply Amplifier
Operational Amplifiers - Op Amps Dual JFET-Input
TEXAS INSTRUMENTS - MAX3223ECPWG4 - Transceiver RS232, 2 Drivers, ± 15-kV ESD Protection, 3V-5.5V supply, TSSOP-20
The CD4503BEG4 is a CMOS hex non-inverting buffer from Texas Instruments with three-state outputs and two independent output-enable control inputs, packaged in a 16-pin through-hole DIP. It operates from 3V to 18V supply voltage and is compatible with both CMOS and TTL logic families. Ideal for bus expansion and signal level conversion in low-power digital logic designs.
Quint Transmitter Triple Receiver RS-232 28-Pin SSOP Tube
The MAX3223CDBE4 is a multichannel RS-232 line driver and receiver IC from Texas Instruments, operating from 3 V to 5.5 V supply and compliant with EIA/TIA-232-F and V.28 standards. It integrates two drivers and two receivers with Schmitt-trigger inputs for robust noise immunity in serial communication designs. Available in a 20-pin SOIC package with worldwide distribution.
The XPS63805YFFT is a 2A high-efficiency buck-boost switching converter from Texas Instruments, capable of maintaining regulated output voltage when input voltage is above, equal to, or below the output. It operates across a wide input range and integrates the power switches in a compact BGA package. Designed for applications requiring seamless transition between buck and boost modes from a single-cell Li-ion battery.
SOIC-16
PTLV9004IRTER is a 4-channel rail-to-rail input/output operational amplifier by Texas Instruments with 1 MHz gain-bandwidth product. Key specs: 1.8 V to 5.5 V supply, 2000 µV max offset voltage, 16-pin QFN package. Available from stock with worldwide shipping.
Power Over Ethernet PD Controller 0V 57V 90W 20-Pin VQFN EP
Fast Transient Response, 1-A, Low-Dropout Voltage Regulators
The CD4572UBME4 is a CMOS hex gate IC from Texas Instruments combining 4 inverters, one 2-input NOR, and one 2-input NAND gate in a 16-SOIC package. It operates from the 4000 series family with 50 pF load capacitance and 6.8 mA output sink current. Available from stock with worldwide shipping.
Use the download button to access the XTR305IRGWT schematic symbol, PCB footprint, and 3D model.
XOR Gate 4-Element 2-IN CMOS 14-Pin CDIP Tube
The Texas Instruments CD4030BF3A is a quad 2-input XOR gate IC from the 4000-series CMOS family, housed in a 14-pin ceramic DIP package. It features four independent XOR functions with a load capacitance of 50 pF and an output low current of 1.5 mA for low-power logic applications. Available from authorized distributors globally with competitive pricing and stock.
Linear Voltage Regulators 3-Trm 100mA Adj Pos Voltage Regulator
The CD4075BPWRE4 is a CMOS triple 3-input OR gate in a 14-pin TSSOP package. It operates across a wide supply voltage range of 3V to 18V with three independent OR functions per package. Available from stock worldwide with competitive pricing for high-volume applications.
TPS78101DRVTG4 is an adjustable low-dropout (LDO) linear regulator from Texas Instruments with output voltage range from 1.22 V to 5.25 V and 150 mA output current. It features a very low dropout voltage of 200 mV typical and is packaged in a compact 6-pin WSON. Ideal for portable devices and noise-sensitive applications requiring stable low-voltage rails.
The TPS78101DDCTG4 is an adjustable low-dropout (LDO) linear voltage regulator from Texas Instruments, providing 1.22 V to 5.25 V output at up to 150 mA with only 200 mV typical dropout voltage. In a 5-pin TSOT-23 package, it is suited for battery-powered and space-constrained portable power supply designs.
CD4041UBEG4 is a CMOS quad non-inverting buffer/driver operating up to 18 V supply in a 14-pin DIP package. Provides 4 buffered outputs for driving signals across wide voltage ranges in logic interfaces. Available from stock worldwide with competitive pricing.
Linear Voltage Regulators 3Pin 100mA Adj Vltg Reg
High Accuracy Upgrade to Industry Standard LM75 / TMP75 I2C Temperature Sensor
The XDRV10974RUMR is a 12 W, 12 V three-phase sensorless BLDC motor driver IC from Texas Instruments, featuring integrated gate drivers and intelligent commutation control. It eliminates the need for Hall-effect sensors by using back-EMF detection, and is housed in a compact QFN package for space-efficient motor drive designs.
Buffer 4-CH Inverting/Non-Inverting CMOS 14-Pin CDIP Tube
XOR Gate 4-Element 2-IN CMOS 14-Pin SOIC T/R
Texas Instruments PDRV8847PWPR is a dual H-bridge motor driver capable of delivering 2 A per channel, designed for driving bipolar stepper motors or two DC motors in a small outline HTSSOP package. It features integrated protection and PWM current control for precision motion applications.
Buffer 4-CH Inverting/Non-Inverting CMOS 14-Pin CDIP Tube
XOR Gate 4-Element 2-IN CMOS 14-Pin SOIC Tube
Automotive 1 Channel High Side Current Sense Switching Mode LED Driver
Bus Transceivers 3.3-V ABT 16-Bit Bus Trncvr W/3-St Otpt
Texas Instruments TPS70745PWPG4 is a dual-output LDO voltage regulator with power-on reset generator and manual reset input in a 20-pin TSSOP package. Features 2-channel low-dropout regulation, input fault protection, and e4 JEDEC moisture sensitivity compliance. Available in stock worldwide with fast delivery for industrial and consumer designs.
XOR Gate 4-Element 2-IN CMOS 14-Pin SOP T/R
Automotive 3A High-Accuracy Low-Noise Low-Dropout (LDO) Voltage Regulator
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote