Integrated Circuit

Quadruple Low-Power Line Receiver

IC DAC 8BIT MULTIPLYING 16-DIP

BASIC ISOLATED AMPLIFIER FOR AUTO

Texas Instruments CD74AC138M96G4 is a 3-to-8 line inverting decoder and demultiplexer in a 16-pin SOIC package, featuring advanced CMOS AC logic for high-speed operation. It includes two active-low and one active-high enable inputs, 50 pF load capacitance tolerance, and 24 mA output sink current for robust bus driving. Available in tape and reel packaging for automated assembly with global distribution through authorized distributors.

DIP, DIP16,.3

Switching Controllers Current-Mode PWM Controller

LDO Regulator Pos 2.5V 0.4A 5-Pin SOT-23 T/R

The PTL431LIACDBZR is an adjustable precision shunt voltage regulator from Texas Instruments in a 3-pin SOT-23 package. It offers optimized reference current performance in a two-terminal configuration, enabling accurate voltage regulation from 1.24 V upward using a simple external resistor divider. Compact and RoHS-compliant for consumer and industrial designs.

LDO Regulator Pos 0.798V to 3.6V 3A 20-Pin VQFN EP T/R

LVDS Interface IC Quad Transmitter w/Flow-Thru Pinout

Use the download button to access the TL2844PE4 schematic symbol, PCB footprint, and 3D model.

PC Power Supply Supervisor

The PTL432LIBIDBZR is an adjustable precision shunt voltage regulator from Texas Instruments with an optimized reference current architecture, designed for low-power flyback converter feedback and precision reference applications. Operating in a 3-pin SOT-23 package, it adjusts cathode voltage from approximately 1.24V to 36V using an external resistor divider. Its minimized reference current reduces power dissipation and simplifies optocoupler feedback design in switching power supplies.

Switching Controllers Current-Mode PWM Controller

Conv DC-DC 3.1V to 17V Step Down Single-Out 3.3V 1.5A 16-Pin VQFN EP T/R

Texas Instruments TL031CDRG4 is an enhanced JFET-input, low-power precision operational amplifier in SOIC-8 package, featuring 70 dB minimum CMRR, 4.5 mV max input offset voltage, and 0.2 pA typical bias current. Designed for high-impedance sensor interfaces, precision signal conditioning, and instrumentation applications where ultra-low input bias current and low power consumption are critical. Available from authorized distributors worldwide with same-day shipping.

Operational Amplifiers - Op Amps Dual Low-Power Rail-to-Rail I/O

The PATL431LIBQDBZR is a high bandwidth, low quiescent current programmable shunt voltage reference from Texas Instruments. It offers a wide adjustable output voltage range and tight initial accuracy, making it ideal for precision analog circuit designs. Available in a compact SOT-23 3-pin package with worldwide stock and global shipping.

Use the download button to access the ISO7721FDWVR schematic symbol, PCB footprint, and 3D model.

TLC548CPE4 is an 8-bit successive approximation ADC from Texas Instruments in an 8-pin DIP package, with a single analog input channel and up to 17 µs conversion time. It features a 3-wire SPI-compatible serial interface and supports analog input voltages up to 6 V for versatile signal acquisition. RoHS-compliant and suitable for low-speed data acquisition, industrial sensors, and microcontroller-based measurement systems.

The PATL432LIBQDBZR is a high-bandwidth, low-quiescent-current programmable precision shunt voltage regulator from Texas Instruments, designed for adjustable voltage reference and feedback regulation applications. Housed in a 3-pin SOT-23 package, it offers wide cathode voltage adjustment from 1.24V to 36V with fast response and high bandwidth for switching power supply feedback networks. Suitable for isolated flyback, LED driver, and precision reference circuits.

PATL432LIBIDBZR is a high-bandwidth, low quiescent current programmable precision shunt voltage reference by Texas Instruments in a compact SOT-23 3-pin package. Key specs: three-terminal adjustable voltage reference, low Iq for energy-sensitive applications, SOT-23 surface-mount package. Available in stock with worldwide shipping.

PATL432LIAIDBZR is a high-bandwidth, low quiescent current programmable precision shunt voltage reference by Texas Instruments, packaged in a compact SOT-23 3-pin package. Key specs: three-terminal voltage reference topology, low Iq for battery applications, SOT-23 package. Available in stock with worldwide shipping.

Buffer/Line Driver 16-CH Non-Inverting 3-ST BiCMOS 48-Pin SSOP T/R

16-Bit, 500kSPS, 8-Ch SAR ADC w/ Bipolar Inputs Using 5V Supply, Low-Drift Vref, and Wide Temp Range

NAND Gate 4-Element 2-IN Bipolar 14-Pin PDIP Tube

Digital Isolators

4.5V to 18V Input, 6-A Synchronous Step-Down Converter with Eco-mode™

Texas Instruments TPS2022DRG4 is a single-channel 1 A source load switch IC in an 8-pin SOIC package, featuring integrated overcurrent, thermal, and undervoltage protection for robust power distribution in USB and peripheral bus applications.

Digital Bus Switch ICs Quad FET 2.5V/3.3V Lo-Vltg

High-Efficiency Flyback Controller With Optocoupler Feedback

Current Sense Amplifiers 26V, 350kHz current sense amplifier w/ integrated over-current comparator 8-WSON -40 to 125

Use the download button to access the REG1117-5G4 schematic symbol, PCB footprint, and 3D model.

Operational Amplifiers - Op Amps Adv LinCMOS RtoR Otp Wide-Inp-Vltg Dual

Automotive Standard Programmable Watchdog Timer With Enable

Voltage Level Translator 16-Pin TVSOP T/R

SOIC-8

Encoders, Decoders, Multiplexers & Demultiplexers CMOS Dual Bin to 1-4 Decoder/Demultipl

SOIC-8

16-bit Microcontrollers - MCU 24 MHz 105 C integrated analog microcontroller with 16 KB FRAM, Op-Amps/PGAs, 12-bit DACs, 12-bit AD 40-VQFN -40 to 105

The Texas Instruments CD4555BPWG4 is a CMOS dual binary-to-1-of-4 decoder and demultiplexer from the 4000 series, providing two independent 2-line to 4-line decoding functions in a single package. It features true (non-inverted) output polarity, standard input conditioning, and a 50pF load capacitance, making it ideal for address decoding and data routing applications. Housed in a 16-pin TSSOP package with plastic/epoxy construction for surface-mount PCB assembly.

The CD4053BF is a triple 2-channel analog multiplexer and demultiplexer from Texas Instruments, featuring three independent SPDT (single-pole double-throw) switches in a 16-pin ceramic DIP package. It operates from a single or dual supply up to ±20.5V with a 30 MHz bandwidth, supporting analog signal routing in audio, industrial, and test equipment. Low on-resistance and break-before-make switching make it ideal for precision analog signal switching.

Automotive High-Impedance, 2V Input, Basic Isolated Amplifier for Voltage Sensing

OP Amp Dual GP R-R O/P ±5V/10V Automotive 8-Pin SOIC Tube

Voltage References 4.096V Precision Mcrpwr Shunt .1% acc

7802701EA is a Texas Instruments integrated circuit for industrial electronics and embedded systems. It combines 16 pins, DIP, -55°C to 125°C for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.

Interface - CODECs L-P Stereo CODEC with HP Amplifier

The SN74AVC4T245DG4 is a 4-bit dual-supply bus transceiver with voltage level translation from Texas Instruments, supporting bidirectional data transfer between two voltage domains. With separate configurable power supplies for Port A and Port B ranging from 1.2 V to 3.6 V, it enables 3.3 V to 1.8 V translation in a 16-pin SOIC package.

Texas Instruments SN74HCT245NG4 is an octal non-inverting bus transceiver with 3-state outputs accepting 5.5 V supply in a 20-pin DIP package. It features direction control via the DIR pin and output-enable via the OE pin for bidirectional 8-bit data bus buffering. Available from stock with worldwide shipping.

Shift Register Single 8-Bit Serial/Parallel to Serial/Parallel 20-Pin CDIP Tube