Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 52,051–52,100 of 77,666
TPD2E2U06DRLR-P is a dual-channel, ultra-low-capacitance ESD protection device for high-speed data lines. It features a 7.5 V nominal breakdown voltage and 12.4 V maximum clamping voltage, protecting USB, HDMI, and similar interfaces. Packaged in a small SOT-363 form factor for compact PCB integration.
Texas Instruments UC3527ANG4 is a regulating PWM switching controller in a 16-pin DIP package, operating from 8 V to 35 V input with voltage-mode control. It targets industrial and offline power supply designs requiring robust PWM regulation.
USB Power SW Hi Side/DIST Dual 5.5V 1.6A 8-Pin SOIC Tube
The TLV2545CDGK is a 12-bit successive approximation ADC from Texas Instruments with 200 kSPS serial output. It features a single analog input channel, 3.5 µs maximum conversion time, and 5.5V maximum analog input voltage. Available in 8-pin MSOP package, from $3.00 in stock with worldwide shipping.
Digital to Analog Converters - DAC 10-Bit 3 us Quad DAC Serial Input
The SN74LV166APWRG4 is an 8-bit parallel-in serial-out shift register from Texas Instruments in the LV-A logic family. It operates at up to 35MHz with 50pF load capacitance and 16-pin TSSOP package. From $0.40 in stock with worldwide shipping.
HTSSOP,
Use the download button to access the TPS2066DRG4 schematic symbol, PCB footprint, and 3D model.
Counter Shift Registers High Speed CMOS 8-Stg Shift Register
XPS62840YBGR is a 6 pins integrated circuit by Texas Instruments. Key specs: 6 pins, BGA package, 60-nA IQ, 1.8-V to 6.5-VIN, high-efficiency 750-mA step-down converter. From quote-based sourcing, in stock checks support worldwide shipping.
Quad 5-MHz, 15-V/µs high slew-rate, RRIO op amp
PTLV809EA30DBZR is a low-power 3-pin voltage supervisor/reset IC with active-low push-pull reset. It monitors one supply in SOT-23 across -40°C to 125°C. From inquiry pricing, in stock worldwide shipping.
Adjustable and fixed 1-A 16-V positive-voltage low-dropout (LDO) linear regulator
Quad 5-MHz, 15-V/µs high slew-rate, RRIO op amp
Texas Instruments PTLV809EA43DBZR is a low-power 3-pin voltage supervisor IC with active-low push-pull reset output and a fixed 4.3 V threshold, housed in a SOT-23 package for microprocessor reset and power monitoring applications.
PTLV809EA46DBZR is a low-power 3-pin voltage supervisor with a fixed 4.63 V threshold, active-low push-pull reset output, and ultra-low quiescent current. Housed in a SOT-23-3 package, available from stock with worldwide shipping.
Power Switch ICs - Power Distribution Dual 1A Current-Limited
Analog Multiplexer Single 4:1 14-Pin SOIC Tube
Operational Amplifiers - Op Amps Auto Cat Lo Pwr Rail RailInpt Output
Audio Amplifiers DirectPath 2Vrms Line Driver
Dual Channel Dual ADC Pipelined 500Msps 16-bit JESD204B 72-Pin VQFN EP T/R
SP Amp Current Sense Amp Single R-R O/P 5.5V 6-Pin SOT-563 T/R
26V, 350kHz, bi-directional, high-precision current sense amplifier in ultra small (sot-563) package
4.5-V to 24-V input, 3-A output synchronous buck converter
32-bit Microcontrollers - MCU C2000 32-bit MCU with 100-MHz, FPU, TMU, 128-kb flash, PGAs, SDFM 100-LQFP -40 to 125
Bus Switch 1-Element CMOS 8-IN 20-Pin TSSOP Tube
Automotive 6 to 60-V three-phase smart gate driver
Use the download button to access the ISO7763FQDBQRQ1 schematic symbol, PCB footprint, and 3D model.
Precision Amplifiers Quad Enhanced JFET Precision
40V, bi-directional, ultra-precise current sense amplifier w/picoamp IB & ENABLE
Operational Amplifiers - Op Amps Quad Low Power Rail-to-Rail I/O
Buffers & Line Drivers Hex Inverters
Logic Gates Quad 2-Input Pos-AND
Automotive 150-mA high-voltage ultra-low-IQ low-dropout (LDO) linear regulator
Texas Instruments PDS90UB941ASRTDTQ1 is an automotive-grade DSI to FPD-Link III bridge serializer with 4-channel differential outputs in a 64-pin QFN package. Designed for MIPI DSI display bridge applications in ADAS and in-vehicle infotainment. Available in stock worldwide with fast shipping.
SimpleLink™ multiband wireless MCU with integrated power amplifier
Use the download button to access the SNJ55462JG schematic symbol, PCB footprint, and 3D model.
OPA2234UE4 is a dual low-power precision single-supply operational amplifier by Texas Instruments with 106 dB typical CMRR and 25 nA maximum bias current in an 8-pin SOIC package. Key specs: -40°C to 85°C operating range, voltage-feedback architecture, and 91 dB minimum CMRR. Available from stock worldwide.
AEC-Q100, 36V, bi-directional, low-/high-side, voltage output CSA with window comparator
The CD74HC173NSRG4 is a quad D-type flip-flop with 3-state bus driver outputs from Texas Instruments, featuring dual output enable and 50 pF load capacitance in the HC CMOS family. It stores 4 bits with 6 mA output drive in a 16-pin SOIC package. From $0.45 in stock with worldwide shipping.
AEC-Q100, 36V, Bi-Directional, Low-/High-Side, Voltage Output CSA with Dual Comparators
The PTLV9064QDRQ1 is a quad-channel, 10 MHz, low-noise, rail-to-rail input/output CMOS operational amplifier from Texas Instruments designed for cost-sensitive automotive and industrial systems. It delivers 80 dB minimum CMRR with voltage-feedback architecture and frequency compensation across all 4 channels in a 14-pin SOIC package. The device targets signal conditioning, active filters, and sensor interface circuits where compact integration and rail-to-rail swing are critical.
Texas Instruments PTPS23881RTQT is a high-power 8-channel Power-over-Ethernet PSE controller with 200 mΩ integrated RSENSE, operating from a 3V to 3.6V supply in a 56-pin QFN package. Available from stock worldwide with fast shipping.
AEC-Q100, 36V, bi-directional, low-/high-side, voltage output CSA with window comparator
Automotive 300-mA high-voltage ultra-low-IQ low-dropout (LDO) linear regulator
Supervisory Circuits Ultra-Low Voltage Processor
The Texas Instruments SN74ALS193ANE4 is a 4-bit synchronous binary up/down counter from the ALS logic family, clocking up to 30 MHz with parallel load capability and separate up/down clocks. It is housed in a 16-pin PDIP package for through-hole applications.
Conv DC-DC 0.8V to 3.3V Step Up Single-Out 3.3V 0.2A 10-Pin VSSOP T/R
SP Amp Current Sense Amp Single R-R O/P 5.5V 6-Pin SOT-563 T/R
Switching Controllers Wide Input Sync Buck Cntrlr w/DDR trking
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote