Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 52,001–52,050 of 77,666
MCU 16-bit MSP430 RISC 128KB Flash 2.5V/3.3V 100-Pin LQFP T/R
Use the download button to access the INA818IDR schematic symbol, PCB footprint, and 3D model.
IC GATE OR 4CH 2-INP 14DIP
Texas Instruments TS5A4594DCKRE4 is a single-channel SPST analog switch with 8 Ohm on-resistance and 450 MHz bandwidth in a SOT23-5 package, supporting up to 5.5 V supply. Ideal for signal routing and multiplexing in portable electronics.
RS-232 Interface IC 3V To 5.5V Two Ch RS-232
LDO Voltage Regulators Fixed LDO Volt Reg
Switching Controllers CURRENT-MODE PWM CONTROLLER
GREEN, PLASTIC, DIP-16
15A, 2.7mΩ smart eFuse with accurate load current monitor and adjustable transient fault management
Buffers & Line Drivers 16-Bit Buff/ Line Drv W/3-St Otpt
40V, bi-directional, high-precision current sense amplifier w/ picoamp IB & ENABLE
The UC3525AJ is a voltage-mode PWM controller IC from Texas Instruments capable of switching up to 400 kHz with 400 mA output drive and an 8-40V input supply range, housed in a 16-pin ceramic CDIP package. It implements pulse-width modulation control for offline and DC-DC switching power supplies. Available from distributors worldwide for immediate or scheduled delivery.
15A, 2.7mΩ smart eFuse with accurate load current monitor and adjustable transient fault management
Logic Gates Quad Positive-NAND Gate
Op Amp Dual Low Noise Amplifier R-R I/O ±3V/6V 8-Pin HVSSOP EP T/R
Texas Instruments TPS60133PWPG4 is a switched-capacitor charge pump step-up regulator delivering a regulated 5 V output at up to 150 mA from a 2.7 V to 5.4 V input, requiring no inductors for a compact, low-noise power solution. Housed in a 20-pin HTSSOP package suitable for space-constrained portable and industrial applications.
LCD Drivers 5V/1.6A(I/O) 4-CH Multi-Converter
Texas Instruments SN74AUC1G66DBVRG4 is a single-channel SPST analog switch in a 5-pin SOT-23 package, featuring ultra-low on-state resistance up to 20 Ω and 55 dB off-state isolation. It operates in low-voltage systems for signal routing in portable, wearable, and battery-powered applications.
PTLIN1021DRQ1 is a logic interface IC by Texas Instruments. Key specs: SOIC package, 8 pins, -40°C to 125°C. From inquiry pricing, in stock with worldwide shipping.
Motor / Motion / Ignition Controllers & Drivers 1.5A automotive stepper motor driver with Smart Tune technology & Stall Detection 24-HTSSOP -40 to 125
Use the download button to access the LM5163QDDARQ1 schematic symbol, PCB footprint, and 3D model.
Digital to Analog Converters - DAC 8-Bit 0.1 us Dual MDAC
Voltage References 1.2-V Precision Mcrpwr Shunt .2% acc
Use the download button to access the BQ25886RGER schematic symbol, PCB footprint, and 3D model.
The LM3S9B92-IBZ80-C5T is a 32-bit ARM Cortex-M3 Stellaris microcontroller by Texas Instruments in a 108-ball BGA package. It features integrated ADC, DMA channels, boundary scan support, and operates at up to 16.384 MHz for embedded control tasks. From $10.00 in stock with worldwide shipping.
Use the download button to access the TL594CNG4 schematic symbol, PCB footprint, and 3D model.
Buffers & Line Drivers Octal Buffer/Driver With 3-State Outputs
TEXAS INSTRUMENTS - ADS7815UE4 - Analogue to Digital Converter, 16 bit, 250 kSPS, Single Ended, Parallel, Dual (+/-), -4.75 V
Hot Swap Voltage Controllers 12V/3.3V Hot Swap & ORing Controller
16-bit Microcontrollers - MCU
ARM Microcontrollers - MCU Stellaris Micro controller
4-Channel Single ADC Delta-Sigma 1ksps 16-bit Serial 16-Pin WQFN EP T/R
Half-Duplex RS-485 Transceivers with integrated surge protection
The LM25180QNGUTQ1 is an automotive-grade 42V primary-side regulated flyback converter with an integrated 65V, 1.5A power MOSFET in an 8-pin WSON package. It operates from 4.5V to 42V input using current-mode resonant control for high efficiency. Available from stock worldwide with automotive AEC-Q100 qualification.
DAC1210LCJ is a 12-bit parallel-input digital-to-analog converter from Texas Instruments with 0.05% maximum linearity error in a 24-pin ceramic DIP package. Designed for precision industrial analog signal generation, process control, and legacy instrumentation systems requiring stable output accuracy.
LM25180NGUT is a Texas Instruments primary-side regulated (PSR) flyback converter IC supporting 4.5 V to 42 V input, integrating a 65 V / 1.5 A power MOSFET with current-mode resonant control in an 8-pin WSON package rated from -40°C to 150°C for industrial and communications power supplies.
The LMX2326TMX is a PLL frequency synthesizer from Texas Instruments in a 16-pin TSSOP small outline package with peak reflow temperature of 260°C. It integrates a complete phase-locked loop for RF and wireless frequency synthesis applications. Available from authorized distributors with worldwide shipping.
Voltage References Lo-Vtg Adj Precision Shunt Regulator
Precision Amplifiers Quad Precision Lo-Pwr Single Supply
Buffers & Line Drivers Quad MOSFET Drivers
Analog Comparators Single Low-Voltage
Programmable mid input voltage range Power Management IC (PMIC) for Apollo Lake processors
Buffers & Line Drivers Quad MOSFET Drivers
The CD74AC541M96G4 is a non-inverting octal buffer and line driver IC from Texas Instruments in a 20-pin SOIC package. It features dual active-low output enable controls, 24 mA output drive current, and 50 pF load capacitance for high-speed AC-logic bus driving. Available from stock with worldwide shipping.
LED Display Drivers 16-Chan LED Driver
Logic Gates Triple 3 Inpt Pos AND Gates
The UC1825AJ is a current-mode PWM controller with 2A output capability and up to 1000 kHz switching frequency in a 16-pin CDIP package. It supports input voltages from 8.8V to 20V and features pulse-width modulation with configurable current-mode control. From $3.20 in stock with worldwide shipping.
LVDS Interface IC Quad LVDS Receiver
The CD74HC4316EG4 is a quad analog switch IC with four independent SPDT switches, supporting supply voltages from 2 V to 6 V, on-resistance below 50 Ω, and a 16-pin DIP package suitable for signal routing applications.
RS-232 Interface IC 3-5.5V Multich RS232 Line Drvr/Rcvr
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote