Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 5,001–5,050 of 77,666
NJR NJM2902N is a quad operational amplifier in DIP-14 package with single 3V to 32V or dual ±1.5V to ±16V supply, 85 dB CMRR, and 10 mV max input offset voltage. Available from stock worldwide.
NJR NJM2902V-TE2 is a quad single-supply operational amplifier in an SOP-14 package, compatible with industry-standard LM2902 pinout, operating from 3V to 32V single supply or ±1.5V to ±16V dual supply. Key specs include low input offset voltage, wide common-mode input range to ground, and 1MHz gain-bandwidth product. Available from stock worldwide with fast shipping.
The CDP1802A/3 High-Reliability LSI CMOS 8-bit register oriented Central-Processing Unit (CPU) is designed for use as a general purpose computing or control element in a wide range of stored-program systems or products. The CDP1802A/3 includes all of the circuits required for fetching, interpreting, and executing instructions which have been stored in standard types of memories. Extensive input/output (I/O) control features are also provided to facilitate system design. The 1800 Series Architecture is desig
Telecom Interface ICs Single Channel XCVR 1.5Gbps Bckplane IND
New Japan Radio NJM2370U1-10 is a low-dropout linear voltage regulator delivering 180 mA output current at a fixed 10 V output with dropout voltage as low as 0.1 V typical. Housed in a compact SOT-89 6-pin package, it suits space-constrained designs. Available in stock globally with competitive pricing.
The Skyworks SKY65015-70LF is a high-linearity RF power amplifier in an SOT-89 package designed for 50 Ω systems up to 6000 MHz. It delivers 18 dB gain with a maximum 15 dBm input power rating, offering excellent performance for cellular, LTE, and broadband wireless applications. In stock worldwide with immediate shipping availability.
The Cypress Semiconductor FM24CL64B-GA is a 64Kbit ferroelectric RAM (F-RAM) memory device organized as 8K × 8 bits with I2C serial interface rated for automotive applications. Operating from 3.0 V to 3.6 V, this 8-pin SOIC package combines fast non-volatile memory with near-instantaneous write cycles and unlimited write endurance. Available in stock from global distributors supporting rapid prototyping and production deployment.
Fujitsu MB85RC64APNF-G-JNE1 is a 64-kilobit Ferroelectric RAM (FRAM) memory device with I2C interface, packaged in an 8-pin small-outline dual-in-line (SOP-8) surface-mount configuration. This non-volatile memory solution delivers fast read/write access times, unlimited write endurance cycles, and ultra-low power consumption ideal for IoT devices, industrial loggers, and battery-powered sensor nodes. Available in stock worldwide with rapid shipping for embedded system integration and firmware updates requiring persistent data storage.
The LT1632CN8#PBF is a dual operational amplifier from Linear Technology in an 8-pin DIP package featuring voltage-feedback architecture. Key specifications include 96 dB nominal common-mode rejection ratio, 2.2 µA maximum bias current at 25°C, and frequency compensation for stable closed-loop operation. Available in legacy DIP8 format with worldwide stock from authorized distributors and competitive pricing.
The Linear Technology LT1632CS8#PBF is a dual rail-to-rail operational amplifier featuring 40 MHz gain-bandwidth product, ±2.5 V to ±15 V supply capability, and ultra-low 2.2 µA input bias current in an 8-pin SOIC package. With 96 dB typical Common-Mode Rejection Ratio and voltage-feedback architecture, it excels in precision analog signal conditioning and high-impedance sensor interfaces. Available in stock globally with expedited delivery.
The Linear Technology LT1630CS8#PBF is a precision operational amplifier in 8-pin SOP plastic package, delivering low offset voltage (1250 µV max), excellent common-mode rejection ratio (104 dB nom), and low input bias current (1.2 µA max) for demanding analog signal conditioning applications. Operating from ±5V to ±18V dual supply or single 10V to 36V rails with rail-to-rail input characteristics and frequency compensation, this component excels in precision measurement, data acquisition, and sensor interface circuits. Available in lead-free RoHS-compliant packaging with 9-year product availability guarantee supporting extended industrial and automotive applications.
The LT1633CS#PBF is a Linear Technology voltage-feedback operational amplifier in a 14-pin SO package featuring 2.2 µA input bias current, 96 dB common-mode rejection ratio, and on-chip frequency compensation. Ideal for precision analog signal conditioning and low-power battery-powered instruments. Available worldwide with fast lead times and competitive pricing.
The LT1056CN8#PBF is a Linear Technology precision high-speed JFET operational amplifier rated at 5.5 MHz bandwidth with minimal input bias current of 0.0002 µA typical. Packaged in 8-pin PDIP configuration, this voltage-feedback op-amp features 98 dB common-mode rejection and ultra-high input impedance ideal for transimpedance amplification and precision charge-sensitive detectors. Widely used in instrumentation, medical equipment, and scientific measurement systems requiring precision signal conditioning at lowest worldwide pricing.
The Zilog Z8F1680AN020EG is an 8-bit microcontroller with 16 KB flash memory, built-in ADC, analog comparators, and low-voltage detection in a 44-pin quad flat package. Operating at up to 20 MHz with 37 I/O lines, this RoHS-compliant MCU is ideal for embedded control applications. Available in stock worldwide with expedited shipping for rapid prototyping.
TDA1308TT/N2 is a Nexperia Integrated Circuit for industrial controls and power management. Key specs include 8 pins. Request quote pricing, in-stock sourcing, and worldwide shipping for production builds.
Digital Isolators 2 channel, each bidirectional, 2Mbps, 5kVrms digital isolator, WSOIC-16, -40C to +125C
Compact 155Mbps to 4.25Gbps Limiting Amplifier
Flip Flops Lowest Power 3.0GHz ECL/PECL Differential Data and Clock D Flip-Flop
Power Switch ICs - Power Distribution 250mA to 2.5A Adjustable Current-Limit Switch
ROHS COMPLIANT, SOIC-8
Digital Potentiometer ICs Dallastat
Taiwan Semiconductor TS19601CP5 is an adjustable LED driver IC capable of sourcing up to 700 mA at input voltages up to 50 V, housed in a 5-pin TO-252 surface mount package. The buck-mode switching architecture delivers high-efficiency constant-current LED regulation with external component flexibility. Available from stocking distributors with worldwide shipping.
Infineon ITS4880R, Octal Intelligent Power Switch, High Side, 0.625A, -1 → 45V 36-Pin, SOIC
8-ch Smart High-Side Power Sw 0.6A DSO36 Infineon BTS4880R, Octal Intelligent Power Switch, High Side Power Switch, -1 → 45V, 36-Pin, DSO
Optical Sensor Development Tools Digital UV Index/IR/ Visible Light Sensor
PCA9691TS/1,118 is a Nexperia DC-DC Converter for point-of-load regulation and battery-powered equipment. Key specs include 16 pins. Request quote pricing, in-stock sourcing, and worldwide shipping for production builds.
Output Drive Capability: 15 LSTTL Loads; Outputs Directly Interface to CMOS, NMOS, and TTL; Operating Voltage Range: 4.5 to 5.5 V; Low Input Current: 1.0 uA; High Noise Immunity Characteristic of CMOS Devices; In Compliance with the Requirements Defined by JEDEC Standard No. 7A; Chip Complexity: 328 FETs or 82 Equivalent Gates
Output Drive Capability: 15 LSTTL Loads; Outputs Directly Interface to CMOS, NMOS, and TTL; Operating Voltage Range: 4.5 to 5.5 V; Low Input Current: 1.0 uA; High Noise Immunity Characteristic of CMOS Devices; In Compliance with the Requirements Defined by JEDEC Standard No. 7A; Chip Complexity: 328 FETs or 82 Equivalent Gates
Linear Technology LT1761ES5-BYP#TRMPBF, LDO Regulator, 100mA Adjustable, 1.22 → 20 V 5-Pin, TSOT-23
Current Sense Amplifier 100mV PDIP8 Silicon Labs Si8920AC-IP, Current Shunt Monitor Single Differential 8-Pin DIP
Use of P-Channel MOSFETs at output stage enables output voltage swing close to the supply rail (rail-to-rail output); DIN EN/IEC 60747-5-5,1,414 V (peak) workinginsulation voltage, 8000 V (peak) transient isolationvoltage ratings; User configurable: inverting, non-inverting, auto-reset,auto-shutdown; 2.5 A peak output current driving capability for most 1200 V/150A IGBT; 35 kV / μs Minimum Common Mode Rejection (VCM = 1500 VPK); Wide supply voltage range from 15V to 30V; High Speed; Desaturation detection;
FT900Q-T is a 32-bit 32bit adc by FTDI Chip. Key specs: 32-bit, 32bit, 100MHz. From quote-based pricing, in stock with worldwide shipping for production sourcing.
DIP-8
DIP-8
DIP-8
ROHS COMPLIANT, 11-10C4S, DIP-8
TLP350(TP5,F) is a 0A 0.02A logic ic by Toshiba. Key specs: 0A, 0.02A, 3750V. From quote-based pricing, in stock with worldwide shipping for production sourcing.
DIP-8
Logic Output Optocouplers Photocoupler, Photo IC Output
FT900L-T is a 32-bit 32bit adc by FTDI Chip. Key specs: 32-bit, 32bit, 100MHz. From quote-based pricing, in stock with worldwide shipping for production sourcing.
Logic Output Optocouplers Photocoupler, Photo IC Output
TLP250HF(F) is a 7A 0.02A logic ic by Toshiba. Key specs: 7A, 0.02A, 3750V. From quote-based pricing, in stock with worldwide shipping for production sourcing.
TSSOP-14
LQFP-100
Murata LXDC2HL18A-052 is a non-isolated micro DC/DC converter delivering 1.8 V at up to 600 mA from a 2.3 V to 5.5 V input in a compact 2.5×2.0 mm package. It provides high-efficiency power conversion with tight ±2% output voltage regulation for space-constrained designs. Available worldwide at competitive prices with global stock and fast shipping.
DIP, DIP14,.3
TLE5012B E5000 is a Infineon Sensor for environmental monitoring and instrumentation. Key specs include 8 pins and 6.5V. Request quote pricing, in-stock sourcing, and worldwide shipping for production builds.
DSO-8
Digital to Analog Converters - DAC 8-Bit 2Ch Precision DAC
ROHS COMPLIANT, SOP-16
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote