Integrated Circuit

Texas Instruments LM26CIM5X-RPA/NOPB is a factory-preset CMOS-compatible thermostat IC in a 5-pin SOT-23 package with ±4 °C maximum accuracy and 40 µA maximum operating current. Ideal for compact over-temperature protection circuits. Available from stock with worldwide shipping.

Analog to Digital Converters - ADC Serial Out Low Power

Serializers & Deserializers - Serdes Multi-CH Digital Audio Deserializer

LED Lighting Drivers LDO 2-Bank LED Drvr

Switching Voltage Regulators

Power Management Specialised - PMIC Dual High-Current Step-Down DC/DC and Dual Linear Regulator with I2C-Compatible Interface 24-WQFN -40 to 85

Texas Instruments SN74CBT3244DBRG4 is an octal FET bus switch providing bidirectional signal routing across 8 channels with TTL-compatible control inputs and active-low enable in a 20-pin SSOP package. It operates at near-zero propagation delay with 50 pF load capacitance rating and supports 3.3 V to 5 V bus switching applications. A cost-effective solution for bus isolation, multiplexing, and signal steering in digital logic systems.

LDO Voltage Regulators

Analog Front End - AFE 12 Bit 21 MSPS Ult Lo-Pwr Sig Processor

Texas Instruments LM4949TL/NOPB is a stereo Class D audio subsystem with an OCL headphone amplifier, integrating volume control in a 25-ball DSBGA package. It operates over -40°C to 85°C and suits compact portable audio designs.

Digital Signal Processors & Controllers - DSP, DSC FIXED-POINT DSP

TPS2053DRG4 is a dual high-side MOSFET power distribution switch with 0.9 A current limit per channel and 3 load switch outputs. Available in SO-16 package with worldwide shipping.

The LM4050QBIM3-10/NOPB is a precision micro-power shunt voltage reference from Texas Instruments, providing a stable 10 V nominal output (9.93 V to 10.07 V) in a compact SOT-23 3-pin package. It is a two-terminal device requiring no external components, making it ideal for space-constrained designs. Available lead-free and RoHS-compliant with worldwide distribution.

High Speed Operational Amplifiers Sngl Lo-Noise Hi-Out Current-Feedback

Bus Receivers

Power Switch ICs - Power Distribution Triple 2in 3 out .7A

Switching Controllers BiCMOS Low-Power Current Mode

ARM Microcontrollers - MCU IC ARM CORTEX-M3 MCU

1-to-10 LVDS clock buffer up to 1100-MHz with minimum skew for clock distribution

Texas Instruments CY74FCT191CTSOCTG4 is a presettable synchronous 4-bit up/down binary counter operating at up to 125 MHz with TCO terminal count output and parallel load capability. Drives 50 pF loads with fast FCT logic levels on 5V supply in a 16-pin SOIC package. Available from stock with worldwide shipping.

16-bit Microcontrollers - MCU Ultra low power Micro Controller

LDO Voltage Regulators Cap-Free NMOS 400mA

Texas Instruments UCC2570DTRG4 is a low-power pulse width modulation controller IC designed for voltage-mode and current-mode switching converter designs. It operates from a 10V to 13V supply and supports frequencies suitable for offline and DC-DC converters. Supplied in a 14-pin SOIC package with a -40°C to 85°C operating temperature range.

The LM3S5U91-IBZ80-A1T is a 32-bit ARM Cortex-M3 microcontroller from Texas Instruments' Stellaris LM3S family running at 80 MHz. It integrates USB OTG, Ethernet MAC/PHY, CAN, UART, SPI, I2C, and ADC peripherals in a BGA package. From stock with worldwide shipping.

32-bit Microcontrollers - MCU Piccolo MCU

High Speed Operational Amplifiers SpeedPlus(TM) Low Power, Single Supply Operational Amplifiers 8-SOIC

The UC3717AQTR is a stepper motor drive circuit from Texas Instruments supporting 10 V to 46 V supply with up to 1.2 A maximum output current in a 20-pin PLCC package. It provides full motor drive control for bipolar stepper motors in a single-function IC. Available from stock worldwide with competitive pricing.

The SN74BCT574NSRE4 is an octal D-type edge-triggered flip-flop from Texas Instruments in the BCT logic family, operating at up to 77 MHz with 3-state outputs and active-low output enable. Available in SO-20 package with worldwide shipping.

Motor/Motion/Ignition Controllers & Drivers Stepper Motor Drive Circuit

Flip-Flops Octal D-Type Rgstr with 3-State Output

Bus Transceivers Octal Reg Trnscvr With 3-State Outputs

FIFO 1024 X 18 Synch FIFO Memory

FIFO 64 x 1 x 2 dual independent sync

Supervisory Circuits Ultra-Low Voltage Processor

ARM Microcontrollers - MCU 16/32 Bit RISC Flash MCU, Arm Cortex-R4F 144-LQFP -40 to 125

FIFO Dual 64x1 FIFO Mem

Operational Amplifiers - Op Amps Dual 1.8V w/R-to-R I/O & Shutdown

Power Switch ICs - POE/LAN IEEE 802.3af PoE Pwr Device Cntrler

The SN74AS245DWRG4 is an octal bus transceiver from Texas Instruments featuring bidirectional data transfer with direction control. Built on the AS logic family, it supports 20-pin SOIC packaging with 50 pF load capacitance and 48 mA output sink current. Available from stock with worldwide shipping.

TEXAS INSTRUMENTS - UCC28231PW - IC, PWM CTRL FOR BUS CONV 14TSSOP

Low-Power Differential Line Driver and Receiver Pair

Differential Amplifiers Fully Diff I/O High Slew Rate

Operational Amplifiers - Op Amps Very Low-Noise High Speed 12V CMOS

THS4150IDGKRG4 is a fully differential high-slew-rate voltage-feedback operational amplifier by Texas Instruments in an 8-Pin MSOP package. Key specs: 83 dB nominal CMRR, 15 µA max bias current, fully differential I/O architecture. In stock with worldwide shipping.

LVDS Interface IC Serdes Receiver

LVDS Interface IC Serdes Receiver

Counter Shift Registers Parallel-Ld 8 Bit Ser Shift Register

16-bit Microcontrollers - MCU Mixed Signal MCU

Precision Amplifiers Dual High Precision

Texas Instruments THS4041CDGNG4 is a 165 MHz capacitor-stable voltage-feedback operational amplifier offering 70 dB minimum common-mode rejection ratio and up to 6 µA bias current in an 8-pin SOIC package. Designed for high-speed signal conditioning, it combines wide bandwidth with low offset voltage for precision analog front-end designs.