SN74BCT574NSRE4 Texas Instruments Integrated Circuit (Small Outline Packages) In Stock

The SN74BCT574NSRE4 is an octal D-type edge-triggered flip-flop from Texas Instruments in the BCT logic family, operating at up to 77 MHz with 3-state outputs and active-low output enable. Available in SO-20 package with worldwide shipping.

OBSOLETEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
SN74BCT574NSRE4Small Outline Packages
Quick Facts
Manufacturer
Texas Instruments
Package
Small Outline Packages
Pin Count
20
Lifecycle
OBSOLETE
Category
Integrated Circuit
Temp Range
?°C to 70.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of SN74BCT574NSRE4?

  • 8-bit octal flip-flop with 3-state bus outputs: buffers and registers 8 parallel data lines for address or data bus pipeline stages at up to 77 MHz clock frequency
  • BCT logic family: BiCMOS technology provides TTL-compatible inputs with CMOS output drive, delivering 64 mA output sink current for driving backplane and memory bus loads with 50 pF capacitance
  • Active-low output enable (OE): allows multiple SN74BCT574 devices to share a common bus with true high-impedance 3-state outputs, preventing bus contention in multi-master systems

What is SN74BCT574NSRE4 used for?

The SN74BCT574NSRE4 is used as an 8-bit data or address bus register in microprocessor and DSP system designs where it captures parallel data on the rising clock edge and holds it stable for downstream logic or memory bus interfaces operating at up to 77 MHz. Its 64 mA output sink current and 50 pF load specification make it suitable for driving heavily loaded VME, ISA, or custom backplane buses where standard CMOS logic lacks sufficient drive strength. The device also serves as an output port register in FPGA-based systems needing a buffered latch with 3-state capability to interface with TTL-level peripheral buses.

What are the specifications of SN74BCT574NSRE4?

YTEOL0
Control TypeENABLE LOW
Count DirectionUNIDIRECTIONAL
FamilyBCT/FBT
JESD-30 CodeR-PDSO-G20
Load Capacitance (CL)50pF
Logic IC TypeBUS DRIVER
Max Frequency@Nom-Sup77000000Hz
Max I(ol)0.064A
Number of Bits8
Number of Functions1
Number of Ports2
Output Characteristics3-STATE
Output PolarityTRUE
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeSOP20,.3
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE
Packing MethodTR
Peak Reflow Temperature (Cel)NOT SPECIFIED
Power Supply Current-Max (ICC)62mA
Prop. Delay@Nom-Sup10ns
Propagation Delay (tpd)10ns
Qualification StatusNot Qualified
Supply Voltage-Max (Vsup)5.5V
Supply Voltage-Min (Vsup)4.5V
Supply Voltage-Nom (Vsup)5V
Surface MountYES
TechnologyBICMOS
Temperature GradeCOMMERCIAL
Terminal FormGULL WING
Terminal Pitch1.27mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)NOT SPECIFIED
Trigger TypePOSITIVE EDGE
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
HTS Code8542.39.00.60

Where can I find the SN74BCT574NSRE4 datasheet?

SN74BCT574NSRE4 Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for SN74BCT574NSRE4?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What is the maximum clock frequency and output drive current of the SN74BCT574NSRE4?

The SN74BCT574NSRE4 supports a maximum clock frequency of 77 MHz at its nominal supply voltage and provides an output sink current (I_OL) of 64 mA, enabling it to drive heavily loaded TTL bus lines with up to 50 pF capacitive load while maintaining valid logic output levels across 8 parallel channels.

How does the BCT logic family of SN74BCT574NSRE4 differ from standard CMOS 74HC or 74ACT families for bus driving?

The BCT (BiCMOS Technology) family uses bipolar output transistors to achieve 64 mA output sink current — roughly 4 times the drive of a 74HC574 (8 mA) and comparable to 74ACT, but with lower static power than pure bipolar logic — making the SN74BCT574NSRE4 the preferred choice for driving long backplane traces or multiple memory chip select lines where standard CMOS families would produce excessive voltage droop under load.

In a multi-chip bus design, how does the active-low output enable of SN74BCT574NSRE4 prevent bus contention?

When OE (active-low output enable) is deasserted (logic high), all 8 outputs of the SN74BCT574NSRE4 enter a true high-impedance state regardless of clock or D inputs, allowing multiple 8-bit registers to share the same data bus by ensuring only 1 device drives the 8 lines at a time — a requirement for address multiplexing in 16-bit or 32-bit processor buses where up to 4 octal registers may be connected in parallel.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.

MR
Marco Rossi
CTO, AutoDrive Systems, Italy