STMicroelectronics

QFN-24

STMicroelectronics VNH5019A-E is a full H-bridge motor driver IC rated at 30 A continuous output current and up to 41 V supply voltage with built-in overcurrent, thermal, and undervoltage protection in a 30-pin PowerSO package. Designed for bidirectional DC motor control in automotive and industrial applications. Available in stock with worldwide shipping.

LM134D is a three-terminal adjustable current source IC by STMicroelectronics, capable of sourcing 1 µA to 10 mA with a supply voltage range of 1 V to 40 V. Key specs: 10 mA maximum output current, single function, 8-lead SOIC (Pb-free) package. From competitive pricing, in stock with worldwide shipping.

MULTIWATT-15

Arm® Cortex®-M4 32-bit MCU+FPU, 170 MHz /213 DMIPS, up to 128 KB Flash, 32 KB SRAM, rich analog, math accelerator

Mainstream Arm Cortex-M4 MCU 170 MHz with 64 Kbytes of Flash memory, Math Accelerator, Medium Analog level integration

Operating range from VCC = 1.8 to 6 V ■ Rail-to-rail input and output ■ Extended Vicm (VCC- - 0.2 V to VCC+ + 0.2 V) ■ Low supply current (400 µA) ■ Gain bandwidth product (1.6 MHz) ■ High unity gain stability ■ ESD tolerance (2 kV) ■ Latch-up immunity ■ Available in – SOT23-5 micropackage – MiniSO-8, SO-8, SO-14 – TSSOP8, TSSOP14 package

Operational Amplifiers - Op Amps 1.8V input/output Lo Pwr operation

1.8 V input/output, rail-to-rail, low power operational amplifiers

LQFP-100

Mainstream Mixed signals MCUs Arm Cortex-M4 core with DSP and FPU, 64 Kbytes of Flash memory, 72 MHz CPU, 12-bit ADC 5 MSPS, Comparator, Op-Amp

400 mA nano-quiescent synchronous step-down converter with digital voltage selection and Power Good

SMALL SIGNAL SCHOTTKY DIODE

Use the download button to access the L78L05CZ schematic symbol, PCB footprint, and 3D model.

MULTIWATT-11

LQFP-100

Use the download button to access the STL260N4F7 schematic symbol, PCB footprint, and 3D model.

SOT-23, 5 PIN

Use the download button to access the STM32H723ZGT6 schematic symbol, PCB footprint, and 3D model.

Mainstream Arm Cortex-M0+ MCU with 64 Kbytes of Flash memory, 36 Kbytes RAM, 64 MHz CPU, 4x USART, timers, ADC, DAC, comm. I/F, 1.7-3.6V

TFBGA-100

Mainstream Arm Cortex-M0+ MCU with 64 Kbytes of Flash memory, 8 Kbytes RAM, 64 MHz CPU, 2x USART, timers, ADC, comm. I/F, 1.7-3.6V

DIP-16

Quad channel high-side driver

Arm®Cortex®-M4 32b MCU+FPU, up to 64KB Flash, 16KB SRAM, 2 ADCs, 3 DACs, 3 comp., op-amp 2.0 - 3.6 V

Use the download button to access the STM32L073CBU6 schematic symbol, PCB footprint, and 3D model.

Low clamping and low capacitance bidirectional single line ESD protection

N-channel 950 V, 0.110 Ohm typ., 38 A MDmesh K5 Power MOSFET in a TO-247 long leads package

STMICROELECTRONICS - STPS340U - Schottky Rectifier, 40 V, 3 A, Single, DO-214AA (SMB), 2 Pins, 570 mV

High-performance and DSP with FPU, Arm Cortex-M7 MCU with 2 Mbytes of Flash memory, 216 MHz CPU, Art Accelerator, L1 cache, HW crypto, SDRAM, TFT, JPEG codec, DFSDM

IC SMART SENSOR II 2CH 16QFN

Ultra-low-power Arm®Cortex®-M4 32-bit MCU+FPU, 150 DMIPS, up to 1-MB Flash memory, 320-KB SRAM, LCD-TFT, ext. SMPS

Arm® Cortex®-M4 32b MCU+FPU, 125 DMIPS, 512KB Flash, 128KB RAM, USB OTG FS, 11 TIMs, 1 ADC, 13 comm. interfaces

Motor / Motion / Ignition Controllers & Drivers Low voltage stepper motor driver

Use the download button to access the LM317MDT-TR schematic symbol, PCB footprint, and 3D model.

Linear Voltage Regulators 5.0V 1.0A Positive

STMicroelectronics ST4SIM-200M is an eSIM system-on-chip for M2M industrial IoT applications, integrating GSMA-compliant remote SIM provisioning, secure element, and baseband in a compact VFDFPN-8 package for cellular-connected embedded systems.

Linear Voltage Regulators 12V 1.0A Positive

Linear Voltage Regulators 12V 0.1A Positive

DFD PROTECTION & FILTER

SOT-666, 6 PIN

Inclinometers High-accuracy, high-resolution, low-power, 2-axis digital inclinometer with embedded Machine Learning Core

Use the download button to access the IPS160HFTR schematic symbol, PCB footprint, and 3D model.

Mainstream Arm Cortex-M0+ MCU with 128 Kbytes of Flash memory, 36 Kbytes RAM, 64 MHz CPU, 4x USART, timers, ADC, DAC, comm. I/F, 1.7-3.6V

PENTAWATT-5

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 256KB flash, 64KB SRAM, USB FS, LCD, ext. SMPS

N-channel 250 V 0.29 Ohm typ., 8 A, STripFET(TM) II Power MOSFET in IPAK package

SOT-23, 5 PIN

iNEMO inertial module: always-on 3D accelerometer and 3D gyroscope

Use the download button to access the TDA7294V schematic symbol, PCB footprint, and 3D model.