STMicroelectronics

LQFP-100

Arm® Cortex®-M4 32-bit MCU+FPU, up to 512 KB Flash, 170 MHz / 213 DMIPS, 128 KB SRAM, rich analog, math accelerator, AES

Voltage Regulator, +3.3V, Bi-Polar, 3 Pin, Plastic, SOT-223

STMICROELECTRONICS - STM32L011F3P6 - ARM MCU, ARM Cortex-M0+ Microcontrollers, ARM Cortex-M0+, 32bit, 32 MHz, 8 KB, 2 KB

Mainstream Value line, Arm Cortex-M0+ MCU with 128 Kbytes of Flash memory, 36 Kbytes RAM, 64 MHz CPU, 4x USART, timers, ADC, comm. I/F, 2-3.6V

Low power (400uA), general purpose Bipolar 5V Op-Amp, GBP=5.5MHz, single with shutdown feature

SOP-8

Dual channel digital isolator, -40°C to 125°C, SO 8 WIDE 300, RoHS

Silicon carbide Power MOSFET 650 V, 18 mΩ typ., 119 A in an HiP247-4 package

ARM® Cortex®-M0+ STM32G0 Microcontroller IC 32-Bit Single-Core 64MHz 64KB (64K x 8) FLASH 32-LQFP (7x7)

7.9 V, 24 A unidirectional TVS in SOD882T

Arm® Cortex®-M7 32-bit 550 MHz MCU, up to 1 MB flash, 564 KB RAM, Ethernet, USB, 3x FD-CAN, Graphics, 2x 16-bit ADCs

Galvanically isolated 4 A single gate driver

IC MCU 8BIT 16KB FLASH 44LQFP

Programmable Bluetooth® Low Energy wireless SoC

Arm® Cortex®-M7 32-bit 550 MHz MCU, up to 1 MB flash, 564 KB RAM, Ethernet, USB, 3x FD-CAN, Graphics, 2x 16-bit ADCs

STMicroelectronics STM32H745ZI is a high-performance dual-core microcontroller with an ARM Cortex-M7 at 480 MHz and a Cortex-M4 at 240 MHz, offering 2 MB Flash and 1 MB SRAM in a 144-pin LQFP package. It integrates Ethernet MAC, USB HS, and dual ADCs for demanding real-time control applications. Available from stock with worldwide shipping.

32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family

SOIC-8

Automotive 8-bit MCU, with up to 8-Kbyte Flash memory, data EEPROM, 10-bit ADC, timers, LIN, SPI, I²C, 3 to 5.5 V

STMicroelectronics STM32H743III6 is a 32-bit ARM Cortex-M7 MCU running up to 480 MHz with 140 I/O lines, ADC, DMA, and PWM channels in a BGA package. Available from stock worldwide with fast shipping.

STMicroelectronics HCC4067BF is a 16-channel single-ended analog multiplexer/demultiplexer in DIP-24 package, featuring 40 dB off-state isolation, 5 Ω on-resistance matching, and 240 Ω maximum on-resistance, suited for analog signal routing in industrial and instrumentation applications.

High-performance access line, Arm Cortex-M4 core with DSP and FPU, 1,5 MByte of Flash memory, 100 MHz CPU, ART Accelerator, DFSDM

600 V, 60 A Turbo 2 Soft Ultrafast Recovery Diode

Programmable Bluetooth® Low Energy wireless SoC

1200 V, 10 A, silicon carbide power Schottky diode

1500 W, 13 V TVS IN SMB FLAT

30 V, 30 A dual Power Schottky Rectifier

Automotive 8-bit MCU, with up to 8-Kbyte Flash memory, data EEPROM, 10-bit ADC, timers, LIN, SPI, I²C, 3 to 5.5 V

Proximity Sensors Time-of-Flight 8x8 multizone ranging sensor with wide field of view

Mainstream Arm Cortex-M0+ MCU with 64 Kbytes of Flash memory, 8 Kbytes RAM, 64 MHz CPU, 2x USART, timers, ADC, comm. I/F, 1.7-3.6V

Ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, up to 192KB Flash, 20KB SRAM, 6KB EEPROM, USB, ADC, DACs

Tiny, low power, 16 V single operational amplifier for cost-optimized systems

Core: ARM-32-bit-Cortex-M4 CPU with FPU (72 MHz max), single-cycle multiplication and HW division, and DSP instruction  Memories – Up to 64 KB of Flash memory – 12 KB of SRAM with HW parity check – Routine booster: 4 KB of SRAM on instruction and data bus with HW parity check (CCM)

Use the download button to access the NUCLEO-WL55JC2 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.

LQFP-100

M24C08-RDW6TG is an 8 Kbit (1 KB) serial I2C EEPROM from STMicroelectronics operating from 1.8 V to 5.5 V with a 400 kHz fast-mode interface in an 8-pin TSSOP package. It endures up to 1 million write/erase cycles with 40-year data retention. Available from stock with worldwide shipping.

8 A - 800 V logic level T-series Triac in D²PAK

1500 W, 15 V TVS IN SMB FLAT

The L4993MD is an automotive-grade low-dropout voltage regulator with integrated watchdog from STMicroelectronics. It accepts inputs from 6 V to 31 V with a nominal 200 mV dropout and a maximum 40 V absolute rating, meeting automotive transient requirements. Packaged in 20-pin SO, it targets ECU power supply and microcontroller reset supervision.

Automotive Low Drop Voltage Regulator With Watchdog

1500 W, 30 V TVS IN SMB FLAT

1500 W, 18 V TVS IN SMB FLAT

• Industry standard MICROWIRE™ bus • Single supply voltage: – 2.5 V to 5.5 V for M93Cx6-W – 1.8 V to 5.5 V for M93Cx6-R • Dual organization: by word (x16) or byte (x8) • Programming instructions that work on: byte, word or entire memory • Self-timed programming cycle with auto-erase: 5 ms • READY/BUSY signal during programming • 2 MHz clock rate • Sequential read operation • Enhanced ESD/latch-up behavior • More than 4 million write cycles • More than 200-year data retention Package • ECOPACK2

1500 W, 24 V TVS IN SMB FLAT

Use the download button to access the STM32WLE4JCI6 schematic symbol, PCB footprint, and 3D model.

60 V, 300 mA synchronous step-down switching regulator with 10 μA quiescent current

1500 W, 12 V TVS IN SMB FLAT

8A 800V 150°C D²PAK Logic Level T-Series Triac,VDSM/VRSM:900 V,IGT:10mA.

The STMicroelectronics ACST1635T-8FP is a high-power TRIAC rated at 800 V and 16 A (RMS) with a 147 A surge current capability. It is housed in a 3-pin TO-220FPAB fully insulated package, designed for robust AC power control in industrial and appliance applications.