STMicroelectronics
STMicroelectronics is a global semiconductor leader serving customers across the spectrum of electronics applications. ST's products are found in a wide range of applications including automotive, industrial, personal electronics, and communications.
11,960
Total Products
54
Categories
All STMicroelectronics Components
Showing 2,351–2,400 of 11,960
Automotive-grade N-channel 650 V, 83 mOhm typ., 37 A MDmesh DM6 Power MOSFET in a TO-247 long leads package
N‑channel 600 V, 64 mΩ typ., 45 A MDmesh DM6 Power MOSFET in a TO‑247 package
Automotive-grade N-channel 650 V, 102 mOhm typ., 28 A MDmesh DM6 Power MOSFET in a TO-220 package
Automotive-grade N-channel 650 V, 102 mΩ typ., 28 A MDmesh DM6 Power MOSFET in an H²PAK-7 package
N-channel 800 V, 197 mOhm typ., 16 A MDmesh K6 Power MOSFET in a TO-220 package
N-channel 950 V, 275 mΩ typ., 18 A, MDmesh DK5 Power MOSFET in a TO-220FP package
Automotive-grade N-channel 650 V, 55 mΩ typ., 50 A MDmesh DM6 Power MOSFET in a TO-247 long leads package
TO-263, D2PAK-3/2
Automotive low dropout linear voltage regulator with configurable output voltage having 200 mA current capability
Automotive-grade, low power, dual, 36 V operational amplifiers
40 V, 10 A dual Low Vf Power Schottky Rectifier PSMC (TO-277A)
Dynamic NFC/RFID tag IC with 4-, 16-, or 64-Kbit EEPROM, fast transfer mode capability, and optimized I2C
STMicroelectronics ST25R3916-AQFT is a high-performance NFC universal device and EMVCo reader IC. It supports ISO 14443, ISO 15693, and NFC standards at up to 6.78 MHz with integrated analog front end. Available from stock worldwide with competitive pricing for contactless communication designs.
STMicroelectronics STM32L4P5ZGT6XXX is a 32-bit ARM Cortex-M4 ultra-low-power microcontroller with 1 MB Flash and FPU, running up to 120 MHz in a 144-pin LQFP package. It integrates ADC, DAC, DMA, and a rich peripheral set for advanced portable and IoT applications. From $8.50 in stock worldwide shipping.
Automotive low dropout linear voltage regulator with configurable output voltage having 200 mA current capability
Dynamic NFC/RFID tag IC with 4-, 16-, or 64-Kbit EEPROM, fast transfer mode capability, and optimized I2C
The STMicroelectronics L9616D is a CAN bus transceiver in an SO-8 package offering ESD protection up to 4 kV and operating from a 5 V supply. It supports data rates up to 1 Mbps and is compliant with ISO 11898 for automotive and industrial CAN networks. Available from stock worldwide with fast shipping.
Dynamic NFC/RFID tag IC with 4-, 16-, or 64-Kbit EEPROM, fast transfer mode capability, and optimized I2C
Arm® Cortex®-M4 32-bit MCU+FPU, 170 MHz /213 DMIPS, up to 128 KB Flash, 32 KB SRAM, rich analog, math accelerator
Arm® Cortex®-M4 32-bit MCU+FPU, 170 MHz /213 DMIPS, up to 128 KB Flash, 32 KB SRAM, rich analog, math accelerator
Mainstream Arm Cortex-M0+ 32-bit MCU, up to 128KB Flash, 144KB RAM, 6x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V
Arm® Cortex®-M4 32-bit MCU+FPU, 170 MHz / 213 DMIPS, up to 512 KB Flash, 112 KB SRAM, rich analog, math accelerator
STMicroelectronics ST4SI2M0007AKIFW is a GSMA-compliant eSIM system-on-chip for secure M2M industrial connectivity, featuring 2 MB NVM storage in an 8-pin WFSON small-outline no-lead package with 1.27 mm pitch for automated SMT assembly.
25 A - 800 V - T-series Triac in TO-220AB insulated
Mainstream Mixed signals MCUs Arm Cortex-M4 core with DSP and FPU, 256 Kbytes of Flash memory, 72 MHz CPU, MPU, CCM, 12-bit ADC 5 MSPS, PGA, comparators
Mainstream Arm Cortex-M0+ 32-bit MCU, up to 128KB Flash, 144KB RAM, 6x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V
STQ1NK60ZR is a 3 pins mosfet (n-channel) by STMicroelectronics. Key specs: 3 pins, TO-92 package, N-channel 600 V, 13 Ohm typ., 0.3 A Zener-protected uperMESH(TM) Power MOSFET in TO-92 package. From quote-based sourcing, in stock checks support worldwide shipping.
• Core: ARM® Cortex®-M4 32-bit CPU with 72 MHz FPU, single-cycle multiplication and HW division, 90 DMIPS (from CCM), DSP instruction and MPU (memory protection unit) • Operating conditions: – VDD, VDDA voltage range: 2.0 V to 3.6 V • Memories – Up to 512 Kbytes of Flash memory – 64 Kbytes of SRAM, with HW parity check implemented on the first 32 Kbytes. – Routine booster: 16 Kbytes of SRAM on instruction and data bus, with HW parity check (CCM) – Flexible memory controller (FSMC) for static m
LQFP-64
• Core: Arm® 32-bit Cortex®-M0+ CPU, frequency up to 64 MHz • -40°C to 85°C/105°C/125°C operating temperature • Memories – Up to 64 Kbytes of Flash memory with protection and securable area – 18 Kbytes of SRAM (16 Kbytes with HW parity check) • CRC calculation unit • Reset and power management – Voltage range: 1.7 V to 3.6 V – Power-on/Power-down reset (POR/PDR) – Programmable Brownout reset (BOR) – Programmable voltage detector (PVD) – Low-power modes: Sleep, Stop, Standby, Shutdown – VBAT
ESD, overvoltage and overcurrent protection with charging orientation direction detection for wearables and IoT
650 V, 12 A power Schottky silicon carbide diode
STMicroelectronics MP34DT05-A is an ultra-compact omnidirectional digital MEMS microphone with a -26 dBFS sensitivity, PDM output, and 3.6 V maximum supply. It operates across a 64 Hz to 10 kHz audio bandwidth with 61 dB signal-to-noise ratio in a 3.76 x 2.95 mm SMD solder-pad package. Available for voice recognition, smart speakers, and IoT audio capture applications worldwide.
Low-voltage, high-accuracy, triple/quad voltage microprocessor supervisory circuit in SOT package
Arm® Cortex®-M0+ 32-bit MCU, up to 64 KB Flash, 18 KB RAM, 2x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V
Use the download button to access the STL56N3LLH5 schematic symbol, PCB footprint, and 3D model.
26A 600V Snubberless Triac in TO-3PF package
Automotive 100 V, 10 A Power Schottky Trench Rectifier
Energy Saving Off-line High Voltage Converter
Mainstream Arm Cortex-M0+ 32-bit MCU, up to 64 KB Flash, 18 KB RAM, 2x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V
32-bit Power Architecture® based MCU for automotive powertrain applications
Schottky Diodes & Rectifiers 200 V, 10A Power Schottky rectifier/002
STMicroelectronics TDA7274 is a 3-phase brushless DC motor controller IC in an 8-pin DIP package, operating from 1.8 V to 6 V supply with up to 0.7 A output current, designed for compact sensorless BLDC motor drive applications.
IC AMP D STEREO 80W POWERSSO36
LQFP-64
Mainstream Arm Cortex-M4 MCU 170 MHz with 128 Kbytes of Flash memory, Math Accelerator, Medium Analog level integration
Silicon carbide Power MOSFET 1200 V, 21 mΩ typ., 90 A in an H²PAK‑7 package
Includes ST state-of-the-art patented technology I²C interface • Two-wire I²C serial interface supports 1 MHz protocol • Single supply voltage: 1.8 V to 5.5 V • Multiple byte programming (up to 256 bytes) • Configurable I²C target address Contactless interface • Based on ISO/IEC 15693 • NFC Forum Type 5 tag certified by the NFC Forum • Supports all ISO/IEC 15693 modulations, coding, subcarrier modes and data rates • Custom fast read access up to 53 Kbit/s • Single and multiple blocks read (same
TVS DIODE 58VWM 121VC SMAFLAT
Dynamic NFC/RFID tag IC with 4-, 16-, or 64-Kbit EEPROM, fast transfer mode capability, and optimized I2C
Need STMicroelectronics Components?
Get competitive quotes from authorized China distributors
Request a Quote