STMicroelectronics

Triple high-side MOSFET driver

OMNIFET II - fully autoprotected Power MOSFET

Automotive configurable 6-channel device

Automotive multifunction alternator voltage regulator with PI/P control loop for 12 V / 24 V on board networks

VNQ7E100AJ is a STMicroelectronics integrated circuit for industrial and embedded electronics. It provides 17 pins, Small Outline Packages. From RFQ pricing, in-stock sourcing supports worldwide shipping.

VND7E050AJ is a STMicroelectronics integrated circuit for industrial and embedded electronics. It provides 17 pins, Small Outline Packages. From RFQ pricing, in-stock sourcing supports worldwide shipping.

High voltage high-side driver

VND7E025AJ is a STMicroelectronics integrated circuit for industrial and embedded electronics. It provides 17 pins, Small Outline Packages. From RFQ pricing, in-stock sourcing supports worldwide shipping.

Automotive battery cut-off circuit and airbag system expansion IC

Double-channel high-side driver with analog current sense for automotive applications

Automotive IC for a specific application of electric parking braking LQFP64 2.5 V

High voltage ignition coil driver power integrated circuit

Octal squib driver ASIC for safety application

Automotive advanced airbag for mid/high end applications and cut-off battery IC

Boost Regulator Positive Output Step-Up SPI DC-DC Controller IC 32-QFN (5x5)

Low power voltage regulator

Automotive Extension Airbag IC

Octal squib driver ASIC for safety application

STMicroelectronics L99LD21Q6 is an automotive-grade high-power LED driver IC in a QFN-40 package. It supports serial data input for 8-channel LED control with AEC-Q100 qualification. Available from authorized distributors with worldwide shipping for automotive lighting designs.

Dual automotive linear voltage regulator with configurable output voltage (2 x 250 mA current capability)

The L99LD02Q505 is a dual-phase boost DC/DC controller from STMicroelectronics supporting PWM and PFM control modes across a 5.5 V to 28 V input range in a QFN-32 package. It provides current-mode and voltage-mode control for high-efficiency power conversion in automotive applications. Available from stock worldwide with competitive pricing.

1200 V, 60 A Automotive Grade AEC-Q101 SCR Thyristor

Multi-output driver for automotive applications

The L99LD20Q6 is an 8-channel constant-current high-power LED driver IC from STMicroelectronics designed for automotive lighting applications. It features a serial SPI interface in a 40-pin QFN package, available in stock with worldwide shipping.

STMicroelectronics L5300RPT is an automotive-grade 5 V fixed low-dropout voltage regulator with 300 mA output current, 500 mV typical dropout voltage, and a wide 6 V to 28 V input range. Ultra-low 55 µA quiescent current makes it ideal for always-on automotive ECU supply rails. Available in stock worldwide with competitive pricing.

Multi-output driver for automotive applications

Automotive 5V Low Dropout Voltage Regulator

Automotive linear voltage regulator with configurable output voltage having 500 mA current capability

STGIF7CH60TS-X is an STMicroelectronics SLLIMM 2nd series 3-phase inverter power module rated at 10 A and 600 V, integrating short-circuit rugged IGBTs with gate drivers and bootstrap circuitry in a compact 26-pin module for AC motor drives. Available in stock with worldwide shipping.

Precision, 6 MHz, RR IO, 36 V BiCMOS operational amplifier

L9777B is a fixed low-dropout voltage regulator from STMicroelectronics supporting input voltages from 6.6 V to 31 V with a 0.1 V dropout voltage and line/load regulation of 0.025%. Available in SO-12 package with worldwide shipping from stock.

Low power voltage regulator

STMicroelectronics L4989D013TR is an automotive-grade fixed-output low-dropout linear voltage regulator supporting input voltages from 5.6 V to 31 V with a maximum of 40 V. It features an ultra-low dropout voltage of 0.18 V, line and load regulation of 0.025%, and is supplied in an 8-pin SOIC package on tape and reel. Compliant with automotive standards for use in vehicle electronic control units and power management systems.

Rail-to-rail input/output 5V CMOS Op-Amp, micro-power (29uA), GBP=1.3MHz, single with standby

STMicroelectronics L5300EPT is a positive fixed linear voltage regulator delivering up to 300mA output current with 5.6V to 31V input range and ultra-low 0.5V max dropout voltage. Housed in a compact PPAK 4-lead SMD package for space-saving designs. Available from stock with worldwide shipping.

Mainstream Arm Cortex-M0+ 32-bit MCU, up to 256KB Flash, 144KB RAM, 6x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V

Output rail-to-rail micropower operational amplifiers

Low / High side bidirectional, zero-drift, current sense amplifiers

Precision rail-to-rail input / output 36 V, 22 MHz dual op-amps

Operational Amplifiers - Op Amps Low power, rail-to-rail output, 36V operational amplifier

Low / High side bidirectional, zero-drift, current sense amplifiers

IC GATE DRVR HALF-BRIDGE 14SO

STMicroelectronics 2N5153HR is a general-purpose PNP bipolar junction transistor rated at 80 V collector-emitter voltage, 5 A collector current, and 35 W power dissipation in a TO-39 metal can package. DC current gain hFE minimum of 70 for reliable switching and amplification. Suitable for power switching, audio amplification, and medium-power linear regulator pass transistor applications.

3000 W, 36 V TVS in SMC

Very low clamping Ethernet 10 Gbps single line ESD protection

Dynamic NFC/RFID tag IC with 4-, 16-, or 64-Kbit EEPROM, fast transfer mode capability, and optimized I2C

Rail to rail input/output 5V CMOS Op-Amp, micro-power (10uA), GBP = 450kHz, single

Output rail-to-rail micropower operational amplifiers

ROHS COMPLIANT, SOT-323, SC-70, 5 PIN

Rail-to-rail input/output 5V CMOS Op-Amps, micro-power (29uA), GBP=1.3MHz, small offset, dual