STMicroelectronics

The TS932ID is a dual voltage-feedback operational amplifier from STMicroelectronics featuring ultra-low bias current of 0.3 nA maximum and 85 dB typical common-mode rejection ratio. Housed in an 8-pin SOIC package, it delivers precision signal conditioning for low-current sensor interfaces. Available in stock with worldwide shipping.

Rail-to-Rail CMOS Dual Operational Amplifier

Low power dual CMOS voltage comparator

Micropower dual CMOS voltage comparators

Low-power dual CMOS timer

STMicroelectronics TS556IN is a dual CMOS timer IC in a 14-pin DIP package, capable of operating from 2 V to 15 V supply with output frequencies up to 2 MHz. It integrates two independent 555-style timers supporting monostable and astable modes. Available from stock worldwide with fast shipping.

MICRO, PLASTIC, SO-8

PLASTIC, DIP-8

Low voltage 16-bit constant current LED sink driver with outputs error detection

Precision dual operational amplifier

3-channel capacitive touchkey controller

Very low power consumption: 10 µA/op ■ Output voltage can swing to ground ■ Excellent phase margin on capacitive loads ■ Unity gain stable ■ Two input offset voltage selections

Micropower quad CMOS voltage comparators

Operational Amplifiers - Op Amps Dual Low Power JFET

Precision low power CMOS quad operational amplifiers

Low power dual CMOS voltage comparator

JFET single operational amplifiers

CMOS DUAL OPERATIONAL AMPLIFIERS

High performance CMOS quad operational amplifier

LED sink driver

ROHS COMPLIANT, PLASTIC, DIP-14

The TL072ACN is a dual JFET-input operational amplifier with low input bias current of 0.02 µA and high CMRR of 80 dB minimum. It offers voltage-feedback architecture with internal frequency compensation and a wide supply voltage range. Ideal for audio, signal conditioning, and precision analog circuits.

The TL072CN is a dual JFET-input operational amplifier from STMicroelectronics with 3 MHz gain-bandwidth product and ultra-low 0.2 nA input bias current at 25°C. Its 70 dB minimum common-mode rejection ratio and wide ±15 V supply range suit precision audio and instrumentation designs. Available from stock worldwide with fast shipping for prototyping and volume builds.

PLASTIC, DIP-8

SOP-24

Low-power JFET dual operational amplifiers

Low power JFET quad operational amplifier

LED sink driver

Low voltage 16-bit constant current LED sink driver with output error detection and auto power-saving

16 constant current output channels  Adjustable output current through external resistor  Output current: 3-40 mA  Serial data in/parallel data ouT  3.3 V or 5 V supply voltage  Max clock frequency 30 MHz  Schmitt-trigger input  ESD protection 2 kV HBM  Thermal shutdown

Low voltage 16-bit constant current LED sink driver with output error detection and auto power-saving

Low voltage 16-bit constant current LED sink driver with outputs error detection

LED sink driver

Low voltage 16-bit constant current LED sink driver with auto power-saving

Low power RS-485/RS-422 transceiver

ST7FLIT19BY1B6 is a microcontroller by STMicroelectronics. Key specs include Additional Feature: ALSO OPERATES AT 2.7V SUPPLY AT 4 MHZ; Bit Size: 8. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Low voltage 16-bit constant current LED sink driver with output error detection

Ultra-low-power 32-bit MCU ARM®-based Cortex®-M3, 128KB Flash, 16KB SRAM, 4KB EEPROM, LCD, USB, ADC, DAC

Low voltage 16-bit constant current LED sink driver with output error detection

Standard Amplifier 2 Circuit 8-Mini DIP

Low voltage 16-bit constant current LED sink driver with auto power-saving

Low voltage 16-bit constant current LED sink driver with output error detection

0.300 INCH, ROHS COMPLIANT, PLASTIC, SOP-34

8-bit MCUs with A/D converter two timers, oscillator safeguard & safe reset

LED Driver IC 16 Output Linear Shift Register Dimming 40mA 24-QSOP

Operational Amplifier

Ultra-low-power 32-bit MCU ARM®-based Cortex®-M3, 128KB Flash, 16KB SRAM, 4KB EEPROM, LCD, USB, ADC, DAC

OPERATIONAL AMPLIFIERS

UV EPROM and OTP EPROM

Low power RS-485/RS-422 transceiver