STMicroelectronics

Arm®-based 32-bit MCU, up to 128 KB Flash, crystal-less USB FS 2.0, CAN, 12 timers, ADC, DAC & comm. interfaces, 2.0 - 3.6 V

4 A sensitive Triacs

Low-power dual op-amps with low input bias current

Use the download button to access the IPS4260L schematic symbol, PCB footprint, and 3D model.

0.40 MM PITCH, ROHS COMPLIANT, FLIP CHIP-9

Arm®-Cortex®-M4 32b MCU+FPU, 125 DMIPS, 1.5MB flash, 320KB RAM, USB OTG FS, 1 ADC, 2 DACs, 2 DFSDMs, AES

Mainstream Arm Cortex-M0 Low-voltage line 1,8V MCU with 256 Kbytes of Flash memory, 48 MHz CPU, CAN and CEC functions

Octal squib driver and quad sensor interface ASIC for safety application

Turbo 2 ultrafast high voltage rectifier

ARM® Cortex®-M4 series Microcontroller IC 32-Bit Single-Core 100MHz 1.5MB (1.5M x 8) FLASH 81-WLCSP (4.04x3.95)

1/1 Transceiver Half ISO 9141 8-SOIC

ARM Microcontrollers - MCU High-performance access line, Arm Cortex-M4 core DSP & FPU, 1,5 MByte of Flash 1

ARM® Cortex®-M4 STM32F4 Microcontroller IC 32-Bit Single-Core 100MHz 1.5MB (1.5M x 8) FLASH 100-LQFP (14x14)

Arm®-Cortex®-M4 32b MCU+FPU, 125 DMIPS, 1.5MB flash, 320KB RAM, USB OTG FS, 1 ADC, 2 DACs, 2 DFSDMs, AES

42.1V Clamp 71A Ipp Tvs Diode Surface Mount SMC

3000 W, 22 V TVS in SMC

32-bit Power Architecture® based MCU with 1088KB Flash memory and 80KB RAM for automotive chassis and safety applications

Automative 6-row 85 mA LEDs driver with boost regulator for LCD panels backlight

3000 W, 10 V TVS in SMC

Use the download button to access the L9663 schematic symbol, PCB footprint, and 3D model.

Quad squib driver ASIC for safety application

P6KE200ARL is a 600 W unidirectional TVS diode with 200 V nominal breakdown voltage, 353 V maximum clamping voltage, and 11.3 A peak pulse current rating in DO-15 through-hole package. It provides reliable transient overvoltage protection for industrial and power supply designs on tape-and-reel packaging.

3000 W, 15 V TVS in SMC

CAN Interface IC Can Bus Transceiver

High bandwidth (20 MHz for gain ≥ 4) micro-power (820 μA) rail-to-rail 5 V op amps

Automotive 600 W, 47.6 V TVS in SMA

PNP power Darlington transistor

Current & Power Monitors & Regulators 8 V to 48 V fully programmable universal electronic fuse

8-Kbit serial SPI bus EEPROM with high-speed clock

32-bit Power Architecture® based MCU with 576 KB Flash memory and 40 KB SRAM for automotive chassis and safety applications

Use the download button to access the LIS2DWTR schematic symbol, PCB footprint, and 3D model.

32-bit MCU family built on the Power Architecture® for automotive body electronics applications

QFN-18

Board Mount Temperature Sensors PRECISION TEMP SENSR

Ultra-extreme temperature range improved high voltage resonant controller

32-bit Power Architecture® based MCU for automotive powertrain applications

Power Factor Correction - PFC Current Mode PFC CCM Line Modulated Bi

Quad Transil™ array for ESD protection

0.150 INCH,ROHS COMPLIANT, PLASTIC SOP-8

8-Kbit serial SPI bus EEPROM with high-speed clock

High bandwidth (20 MHz for gain ≥ 4) micro-power (820 μA) rail-to-rail 5 V op amps

Access line ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, 32KB Flash, 8KB SRAM, 1KB EEPROM, ADC, AES

Automotive-grade N-channel 60 V, 0.022 Ω typ., 35 A STripFET™ II Power MOSFET in a DPAK package

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 256KB flash, 64KB SRAM, USB FS, LCD, ext. SMPS

Automotive 60 V, 3 A SMC Low Drop Power Schottky Rectifier

Input/output rail-to-rail low-power operational amplifiers

Use the download button to access the A2C25S12M3 schematic symbol, PCB footprint, and 3D model.

ACEPACK™ 2 sixpack topology, 1200 V, 75 A trench gate field-stop IGBT M series, soft diode and NTC

Trans IGBT Module N-CH 1200V 25A 197000mW 22-Pin ACEPACK-1 Tray

Ultra-low power, high performance, sub-1GHz transceiver