STMicroelectronics

Standard 1 A Triacs

Use the download button to access the STM32L4S7VIT6 schematic symbol, PCB footprint, and 3D model.

Standard 1 A Triacs

Gate Drivers Galvanically isolated 4 A single gate driver

SCR 600 V 25 A Standard Recovery Surface Mount D²PAK,-40°C ~ 125°C.

The ITA18B1RL is a bidirectional 6-channel Transil TVS diode array from STMicroelectronics designed to protect data lines from ESD and transient overvoltage events. It features a 18 V breakdown voltage, 28 V clamping voltage, and common-cathode 6-element configuration in an 8-pin small-outline package. Suitable for multi-line ESD protection in industrial and consumer electronics.

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, 1MB Flash, 320KB SRAM, USB OTG FS, audio, AES+HASH, ext. SMPS

WLCSP-81

ARM Microcontrollers - MCU Ultra-low-power with FPU Arm Cortex-M4 MCU 80 MHz with 1 Mbyte Flash, USB OTG, LCD, AES-256, DFSDM

Schottky Diodes & Rectifiers 2X15 Amp 60 Volt

32-bit Power Architecture® based MCU with 576 KB Flash memory and 40 KB SRAM for automotive chassis and safety applications

Diode Array 1 Pair Common Cathode 100 V 5A Surface Mount TO-263-3, D2PAK (2 Leads + Tab), TO-263AB

Trench gate field-stop IGBT, M series 650 V, 30 A low-loss in a TO-220FP package

40 W bridge car radio amplifier with low voltage operation

STM32L4A6RGT6TR is an ultra-low-power 32-bit ARM Cortex-M4 microcontroller running up to 80 MHz with 1 MB flash and 320 KB SRAM in a 64-pin LQFP package. It features an FPU for 100 DMIPS performance, AES hardware encryption, USB OTG FS, audio interface, and multiple ADC/DAC channels. Designed for IoT edge nodes, wearables, and portable industrial devices demanding long battery life with high processing capability.

The SPC560P44L3BEAAR is a 32-bit automotive-grade microcontroller in a 100-pin LQFP package, clocked at up to 16 MHz with 32-bit data and address buses, integrated ADC, DMA channels, and 67 I/O lines, designed for body electronics, HVAC control, and gateway ECU applications in automotive systems.

TQFN-24

TSX7191ILT is a low-power precision rail-to-rail operational amplifier from STMicroelectronics with a 9.0 MHz gain-bandwidth product, 16 V maximum supply, 450 µV maximum input offset voltage, and 50 pA bias current in a SOT-23-5 package. It serves precision signal conditioning, active filter, and sensor amplification applications requiring wide dynamic range on supplies up to 16 V.

Trench gate field-stop IGBT, M series 650 V, 6 A low loss

Trench gate field-stop IGBT, M series 650 V, 6 A low loss

32-bit Power Architecture® based MCU with 576 KB Flash memory and 40 KB SRAM for automotive chassis and safety applications

32-bit Power Architecture® based MCU with 576 KB Flash memory and 40 KB SRAM for automotive chassis and safety applications

Automotive 8-bit MCU, with up to 128-Kbyte Flash memory, data EEPROM, 10-bit ADC, timers, LIN, USART, SPI, I2C, 3 to 5.5 V

STPS120MF is a 1 A, 20 V power Schottky rectifier diode from STMicroelectronics in a DO-222AA surface-mount package. It features a maximum forward voltage of 0.54 V and 0.41 V typical VF, optimized for high-efficiency freewheeling and output rectification in compact DC-DC converters. Available from stock with worldwide shipping.

STMicroelectronics M74HC04B1R, Hex Inverter, 2 → 6 V, 14-Pin PDIP

ARM Microcontrollers - MCU Mainstream ARM Cortex-M0 USB line MCU with 32 Kbytes Flash, 48 MHz CPU, USB, CAN and CEC functions

Automotive 8-bit MCU, with up to 8-Kbyte Flash memory, data EEPROM, 10-bit ADC, timers, LIN, SPI, I²C, 3 to 5.5 V

STM32F318C8T6 is a 32-bit ARM Cortex-M3 microcontroller running up to 32 MHz with 19 I/O lines, ADC, DMA, and PWM channels in a 48-pin LQFP package. It offers embedded flash and peripherals suited for motor control and sensor applications. Available from authorized distributors with worldwide shipping.

STMicroelectronics STSPIN840 is a dual full-bridge brushed DC motor controller integrating two H-bridge drivers in a compact 24-pin TFQFPN package with an exposed heat-sink slug. It supports dual-motor or single bipolar stepper motor control with current regulation, enabling efficient motion control in portable and industrial applications.

SLLIMM nano 2nd series IPM, 3-phase inverter, 5 A, 600 V, short‑circuit rugged IGBTs

MINI, DIP-8

40 W bridge car radio amplifier with low voltage operation

ARM Microcontrollers - MCU High-performance and DSP with FPU, ARM Cortex-M7 MCU with 2 Mbytes Flash, 216 MHz CPU, Art Accelerator, L1 cache, SDRAM, DFSDM

Automotive 8-bit MCU, with up to 32 Kbyte Flash, data EEPROM, 10-bit ADC, timers, LIN, SPI, I2C, 3 to 5.5 V

TSX711AIYLT is a precision operational amplifier with 102 dB typical CMRR and 0.05 nA bias current. Rail-to-rail input and output, voltage-feedback architecture, and SOT-23-5 package. Suitable for low-power sensor signal conditioning with worldwide shipping.

6A standard and Snubberless™ Triacs

Audio Amplifiers 2x150 W - 1x300 W class D digital input automotive power amplifier with load value recognition and low voltage operation

Arm®-based 32-bit MCU, up to 128 KB Flash, crystal-less USB FS 2.0, CAN, 12 timers, ADC, DAC & comm. interfaces, 2.0 - 3.6 V

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 1MB Flash, 128 KB SRAM, USB OTG FS, LCD, ext. SMPS

SMB, 2 PIN

TS3022IYST is a dual push-pull output voltage comparator with 7000 µV max input offset and 0.3 µA bias current. It delivers fast response in industrial and consumer circuits operating across a wide supply range. Available in SOP-8 package for easy surface-mount assembly.

Ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, up to 192KB Flash, 20KB SRAM, 6KB EEPROM, USB, ADC, DACs

Ultra-low-power 32b MCU ARM®-based Cortex®-M3, 256KB Flash, 16KB SRAM, 4KB EEPROM, LCD, USB, ADC, DAC, memory I/F

Schottky Diodes & Rectifiers 1.0 Amp 60 Volt

Timers & Support Products Watchdog

8-bit ultra-low-power MCU, up to 64-KB Flash, 2-KB data EEPROM, RTC, LCD, timers, USARTs, I2C, SPIs, ADC, DAC, comparators

TO-263, D2PAK-3/2

Use the download button to access the STWA48N60DM2 schematic symbol, PCB footprint, and 3D model.

DFM,

Use the download button to access the STW45N60DM2AG schematic symbol, PCB footprint, and 3D model.