STMicroelectronics

High bandwidth (20 MHz for gain ≥ 4) micro-power (820 μA) rail-to-rail 5 V op amps

Digital controller for power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL

DPAK-3/2

Low power (440uA), general purpose Bipolar 5V Op-Amps, GBP=5.5MHz, small offset, dual

4 Kbit, 2 Kbit and 1 Kbit serial SPI bus EEPROM with high-speed clock

STMicroelectronics Z0107MUF is a 1 A RMS triode AC switch (TRIAC) with 7 mA maximum gate trigger current. It switches AC loads with a holding current of 10 mA and gate trigger voltage of 1.3 V maximum. Available in a 4-pin plastic SMD package suitable for low-power AC control circuits.

Dual/triple ultra-low voltage supervisors with push-button reset (with delay option)

Mainstream Performance line, Arm Cortex-M3 MCU with 1 Mbyte of Flash memory, 72 MHz CPU, motor control, USB and CAN

Single channel high-side driver with analog current sense for automotive applications

Darlington Transistors PNP Power Darlington

ARM Microcontrollers - MCU STM32 Dynamic Efficiency MCU with BAM, High-performance and DSP with FPU, ARM Cortex-M4 MCU with 128 Kbytes Flash, 100 MHz CPU, Art Accelerator

Analog Switch ICs Bilateral Switch

N-channel 600 V, 0.110 Ω typ., 24 A MDmesh™ DM2 Power MOSFET in TO-220FP package

STMicroelectronics STTA106U Diode,

Medium-density access line, ARM® -based 32-bit MCU with 64 or 128 KB Flash, 6 timers, ADC and 7 communication interfaces

STMicroelectronics TDA7494S is a single-channel Class AB audio power amplifier IC delivering up to 10 W output power with 26 dB gain and 22 kHz bandwidth. It features a 15-pin ZIP package and less than 10% harmonic distortion for consumer audio applications. Available from authorized distributors with worldwide shipping.

Advanced IGBT/MOSFET driver

Use the download button to access the STM32F303VEH7TR schematic symbol, PCB footprint, and 3D model.

Highly integrated tuner for AM/FM car radio

SOP-8

Mainstream Arm Cortex-M0 Low-voltage line 1,8V MCU with 256 Kbytes of Flash memory, 48 MHz CPU, CAN and CEC functions

SOT-23, 5 PIN

ARM®-based 32-bit MCU, 150DMIPs, up to 1MB Flash/128+4KB RAM, crypto, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces & camera

Operational Amplifiers - Op Amps RR Video Op Amp STBY 4.5V to 12V 100MHz

256-Kbit serial I²C bus EEPROM

Mainstream Mixed signals MCUs Arm Cortex-M4 core with DSP and FPU, 256 KBytes of Flash memory, 72 MHz CPU, MPU, 16-bit ADC comparators

50 Ω ultra thin balun with integrated harmonic filter / conjugate match balun to ST BLUENRG-134 and BlueNRG-234

N-channel 60 V, 0.019 Ω typ., 8 A STripFET™ F7 Power MOSFET in a PowerFLAT™ 3.3x3.3 package

Galvanically isolated 4 A single gate driver

N-channel 650 V, 1 Ohm typ., 4 A MDmesh M2 Power MOSFET in a PowerFLAT 5x6 HV package

Arm®-based 32-bit MCU, 150 DMIPs, up to 1 MB Flash/128+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces and camera

4 x 50W multifunction quad power amplifier with built-in diagnostics feature

Audio Amplifiers Low voltage operation, high efficiency (class SB), intelligent, dual BTL output power amplifier with full I2C diagnostics including tweeter detection and hardware stand-by/mute

Mainstream Mixed signals MCUs Arm Cortex-M4 core with DSP and FPU, 128 Kbytes of Flash memory, 72 MHz CPU, MPU, CCM, 12-bit ADC 5 MSPS, PGA, comparators

Low-power, dual-voltage comparator

N‑channel 500 V, 162 mΩ typ., 17 A MDmesh II Power MOSFET in a D²PAK, TO-220FP and TO-220 packages

Use the download button to access the STP30N10F7 schematic symbol, PCB footprint, and 3D model.

3000 W, 28 V TVS in SMC

ARM®-based 32-bit MCU, up to 32 KB Flash, crystal-less USB FS 2.0, CAN, 9 timers, ADC and comm. interfaces, 2.0 - 3.6 V

Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI

Ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, up to 192KB Flash, 20KB SRAM, 6KB EEPROM, USB, ADC, DACs

• Core: ARM® 32-bit Cortex®-M4 CPU (72 MHz max), single-cycle multiplication and HW division, DSP instruction with FPU (floatingpoint unit) and MPU (memory protection unit) • 1.25 DMIPS/MHz (Dhrystone 2.1) • Memories – 64 to 256 Kbytes of Flash memory – 32 Kbytes of SRAM with HW parity check • CRC calculation unit • Reset and power management – Voltage range: 2.0 to 3.6 V – Power-on/Power down reset (POR/PDR) – Programmable voltage detector (PVD) – Low power modes: Sleep, Stop, Standby – VBAT s

200 V, 10 A dual Ultrafast Diode

STM32 Dynamic Efficiency MCU with BAM, High-performance and DSP with FPU, Arm Cortex-M4 MCU with 128 Kbytes of Flash memory, 100 MHz CPU, Art Accelerator

Use the download button to access the STM32L4S9ZIT6 schematic symbol, PCB footprint, and 3D model.

High temperature 50A SCRs,High junction temperature: Tj = 150 °C,High noise immunity dV/dt = 500 V/µs up to 150 °C,Gate triggering current IGT = 15 mA,Peak off-state voltage VDRM/VRRM = 600 V.

Quad, ultralow voltage supervisor with push-button reset

Automotive 600 W, 15.3 V TVS in SMA

Trench gate field-stop 650 V, 60 A high speed V series IGBT in a TO-247 and TO-247 long leads packages

Automotive 38 V, 500 mA synchronous step-down switching regulator with 30 µA quiescent current