ON Semiconductor

2.5, 3.3 V, 5.0 V, 8.5 V, 2.0% Output Options 2.5, 3.3 V, 5.0 V, 4.0% Output Options 400 mA Output Current; Protections: +60 V Peak Transient Voltage -42V Reverse Voltage Short Circuit Thermal Overload; Very Low Dropout Voltage; AEC-Q100 Qualified

• 5.0 V, 3.3 V ±2%, 150 mA • Extremely Low Current Consumption ♦ 65 A (Typ) in the ON Mode ♦ 1.0 A in the Off Mode • Early Warning • Reset Output Low Down to VQ = 1.0 V • Adjustable Reset Threshold • Wide Temperature Range

SOIC-8

5.0 V, +/-2%, 150 mA; 3.3 V, +/-2%, 150 mA; Fault Protection: +45 V Peak Transient Voltage -42V Reverse Voltage Short Circuit Thermal Overload; AEC Q100 qualified, PPAP capable

5.0V and 3.3V +/- 2% Output with 150mA Output Current Capability; Active Reset Output Low Down to VQ=1.0V; Adjustable Reset Threshold; Fault Protection: -40V Reverse Voltage Protection Short Circuit Protection Thermal overload protection; Early Warning through SI/SO Leads, adjustable threshold via external resistor; Very Low Dropout Voltage; AEC Q100 Qualified; Integrated Pullup Resistor at Logic Outputs (To Use External Resistors, Select the NCV4279A)

Obsolete - LDO Regulator, 150 mA, Low Dropout

Low Supply Current (ID = 0.9 mA, Typ); Extended Operating Temperature Ranges (-40° to +105°C and -55° to +125°C); Output Voltage Swings within 50 mV of both Rails; Input Voltage Range Includes both Supply Rails; Low Voltage, Single Supply Operation (+1.8 V and Ground to +12 V and Ground); No Phase Reversal on the Output for Over-driven Input Signals; High Output Current (ISC = 80 mA, Typ); Typical Gain Bandwidth Product = 2.2 MHz; 600 W Output Drive Capability

Internal Current and Thermal Limiting; Low Input-to-Output Voltage Differential of 25 mV at IO = 10 mA, and 260 mV at IO = 300 mA; Logic Level ON/OFF Control; Low Quiescent Current (0.3 mA in OFF mode; 125 mA in ON mode); Stable with Output Capacitance of only 0.33 mF for 2.5 V Output Voltage; Extremely Tight Line and Load Regulation

Linear Voltage Regulator IC Positive Fixed 1 Output 400mA D2PAK -40°C ~ 150°C 250 µA 45 mA 1.27V @ 250mA 3.3v

Use the download button to access the NCV4264D50R2G schematic symbol, PCB footprint, and 3D model.

• Input Offset Voltage Trimmed to 100 V (Typ) • Low Input Bias Current: 300 nA • Low Input Offset Current: 3.0 nA • High Input Resistance: 16 M • Low Noise: 18 nV/ √ Hz @ 1.0 kHz • High Gain Bandwidth Product: 24 MHz @ 100 kHz • High Slew Rate: 10 V/s • Power Bandwidth: 160 kHz

Internal Thermal Shutdown Protection; Output Switch Current in Excess of 2.0A; Operation from 2.5V to 60V Input; NCV Prefix, for Automotive and Other Applications Requiring Site and Change Control; Low Standby Current; Precision 2% Reference; Controlled Duty Cycle Oscillator; Driver with Bootstrap Capability for Increased Efficiency; Cycle-by-Cycle Current Limiting; Low Voltage Indicator Output for Direct Microprocessor Interface; Heat Tab Power Package; Moisture Sensitivity Level (MSL) Equals 1; Pb-Free Pa

SOIC−8

Low Standby Current; Output Voltage Adjustable; Precision 2% Reference; Operation from 3.0 V to 40 V Input; Current Limiting; Frequency Operation to 100 kHz; Output Switch Current to 1.5 A; MC34063A = 0 to +70degC; MC33063A = -40 to +85degC; MC33063AV / NCV33063A = -40 to +125degC; 4x4mm DFN package option

Obsolete - Voltage Supervisor, Undervoltage Sensing Circuit, 4.59 V, with Active Low Open Collector Output, Qualified for 5.0 V Systems

ON Semiconductor NCP692MN25T2G, LDO Voltage Regulator, 1A, 2.5 V ±2%, 1.5 → 6 Vin, 6-Pin DFN

Output Adjustable between 1.2 V and 37 V; Output Current in Excess of 500 mA; Internal Thermal Overload Protection; Internal Short Circuit Current Limiting Constant with Temperature; Output Transistor Safe-Area Compensation; Floating Operation for High Voltage Applications; Eliminates Stocking many Fixed Voltages Standard Application; Pb-Free Packages are Available

D2PAK-3

Last Shipments - Linear Voltage Regulator, 1.5 A, Ultra-High PSRR

Wide Operating Voltage Range of 0.8 V to 10 V; Complementary or Open Drain Reset Output; Active Low or Active High Reset Output; High Accuracy Under Voltage Threshold of 2.0%; Quiescent Current of 0.5 uA Typical; Pb-Free Packages are Available; NCV Version for Automotive

Use the download button to access the NCV301LSN12T1G schematic symbol, PCB footprint, and 3D model.

Output Current in Excess of 1.0 A; 1.2 V Maximum Dropout Voltage at 800 mA Over Temperature; Fixed Output Voltages of 1.5 V, 1.8 V, 2.0 V, 2.5 V, 2.85 V, 3.3 V, 5.0 V, and 12 V; Adjustable Output Voltage Option; No Minimum Load Requirement for Fixed Voltage Output Devices; Reference/Output Voltage Trimmed to +/- 1.0%; Current Limit, Safe Operating and Thermal Shutdown Protection; Operation to 20 V Input; Pb-Free Packages are Available

Internal Current Limiting with Thermal Shutdown; Low Bias Current; 60 V Load Dump Protection; Input-to-Output Voltage Differential of < 0.6 V @ 100 mA; Economical 5-Lead TO-220 Package with Two Optional Leadforms; -50 V Reverse Transient Protection; Available in Surface Mount SOP-8, D2PAK and DPAK Packages; Output Current in Excess of 100 mA; Ideally Suited for Battery Powered Equipment; Temporary Mirror-Image Protection; High Accuracy (+/-2%) Reference (LM2931AC) Available

Operating Voltage of 0.85 V to 6.0 V; Rail-to-rail Input/Output Performance; Low Supply Current of 10 µA; No Phase Inversion/Glitchless transitioning in or out of Tri-State Mode; Complementary or Open Drain Output Configuration; Available with the Enable Function

SOIC-16

Use the download button to access the NCV301HSN27T1G schematic symbol, PCB footprint, and 3D model.

SMBUS time-out of 75ms to 325ms; Support for SMBus/ALERT; Shutdown Mode for Low Power Consumption; One-shot Mode; Available in 8−pin Micro8 Package; 12-bit Temperature-to-Digital Converter; Input Voltage Range from 3.0 V to 5.5 V; Temperature Range from −55°C to +125°C; SMBus/I2C Interface; Overtemperature Indicator; These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant

DPAK-3/2

Output Current in Excess of 1.0 A; 1.2 V Maximum Dropout Voltage at 800 mA Over Temperature; Fixed Output Voltages of 1.5 V, 1.8 V, 2.0 V, 2.5 V, 2.85 V, 3.3 V, 5.0 V, and 12 V; Adjustable Output Voltage Option; No Minimum Load Requirement for Fixed Voltage Output Devices; Reference/Output Voltage Trimmed to +/- 1.0%; Current Limit, Safe Operating and Thermal Shutdown Protection; Operation to 20 V Input; Pb-Free Packages are Available

Low Output Saturation Voltage: 130 mV (Typ) @ 4.0 mA; Single or Split Supply Operation; TTL and CMOS Compatible; Input Common Mode Voltage Range to Gnd; ESD Clamps on the Inputs Increase Reliability without Affecting Device Operation; Low Input Bias Current: 25 nA (Typ); Low Input Offset Current: +/- 5.0 nA (Typ)

12-bit temperature-to-digital converter; Input voltage range from 3.0 V to 5.5 V; Temperature range from -55°C to +125°C; SMBus/I2C Interface; Overtemperature Indicator; Support for SMBus /ALERT; Shutdown mode for low power consumption; One-Shot Mode

Output Current in Excess of 1.0 A; 1.2 V Maximum Dropout Voltage at 800 mA Over Temperature; Fixed Output Voltages of 1.5 V, 1.8 V, 2.0 V, 2.5 V, 2.85 V, 3.3 V, 5.0 V, and 12 V; Adjustable Output Voltage Option; No Minimum Load Requirement for Fixed Voltage Output Devices; Reference/Output Voltage Trimmed to +/- 1.0%; Current Limit, Safe Operating and Thermal Shutdown Protection; Operation to 20 V Input; Pb-Free Packages are Available

Audio Power Amplifier, Class D, Stereo, 20 W/Channel, with Programmable Power Limit and Selectable Gain

Output Current in Excess of 1.0 A; 1.2 V Maximum Dropout Voltage at 800 mA Over Temperature; Fixed Output Voltages of 1.5 V, 1.8 V, 2.0 V, 2.5 V, 2.85 V, 3.3 V, 5.0 V, and 12 V; Adjustable Output Voltage Option; No Minimum Load Requirement for Fixed Voltage Output Devices; Reference/Output Voltage Trimmed to +/- 1.0%; Current Limit, Safe Operating and Thermal Shutdown Protection; Operation to 20 V Input; Pb-Free Packages are Available

12-bit temperature-to-digital converter; Input voltage range from 3.0 V to 5.5 V; Temperature range from -55°C to +125°C; SMBus/I2C Interface; Overtemperature Indicator; Support for SMBus /ALERT; Shutdown mode for low power consumption; One-Shot Mode

Use the download button to access the NCP803SN293T1G schematic symbol, PCB footprint, and 3D model.

Use the download button to access the NCT72CMNR2G schematic symbol, PCB footprint, and 3D model.

Use the download button to access the NCS36000DRG schematic symbol, PCB footprint, and 3D model.

Wide Bandwidth of 1.1 MHz; Output Current to 1.0 A; Slew Rate of 1.3 V/s; Internal Thermal Shutdown ; Single or Split Supply Operation; Excellent Gain and Phase Margins ; Common Mode Input Includes Ground; Zero Deadband Crossover Distortion

Obsolete - Operational Amplifier with sub-one volt operation, shutdown pin, Rail to Rail I/O

Use the download button to access the NCS2564DTBR2G schematic symbol, PCB footprint, and 3D model.

NCS333SN2T1G ON Semiconductor, Low Power, Op Amp, RRIO, 350kHz, 1.8 → 5.5 V, 5-Pin SOT-23

Linear Voltage Regulator, 1 A, High PSRR

Pin compatible to the most popular existing industry standard dual MOSFET drivers; Input voltage from 4.5V to 20V; Both outputs can be paralleled for higher drive current; High current drive capability (+/- 5 A); TTL/CMOS compatible inputs, independent of supply voltage; Enable function incorporated for each driver

Internal 8 MHz 2-Pole Reconstruction Filter; Internal Fixed Gain: 6 dB ; Intergrated Level Shifter; Very Low Shutdown Current (< 5uA, 1.5uA Typical); Capability to drive 2 video loads; ESD HBM Protection > 4 kV at the output; Supply voltage Range: 2.7 V to 3.3 V; Sag Correction Circuit; Low Quiscent Current 6 mA typical

Use the download button to access the NCS36000DG schematic symbol, PCB footprint, and 3D model.

Differential Output; 1.0 W into an 8 Speaker; 1.5 W into a 4 Speaker; Single Supply Operation: 2.7 V to 5.5 V; THD+N: 0.2% @ 1 W Output; Low Quiescent Current: 20 mA Max; Shutdown Current < 1.0 A; Excellent Power Supply Rejection; Two Package Options: SOIC-8 Package and DFN8; Pin Compatible with Competitive Devices; Notebook Computing

TSOP−5

Use the download button to access the NCP803SN263T1G schematic symbol, PCB footprint, and 3D model.

Low Input Offset Voltage: 0.5mV, Typ; Input Common-Mode Range includes Ground.; Low Quiescent Current: 300uA per op amp at Vcc=5V.; Wide Power Supply Range: 3V to 32V