Microchip

Microchip PIC32MX110F016D-I/PT is a 32-bit PIC32 microcontroller running up to 40 MHz with USB, integrated ADC, DMA channels, audio and graphics interfaces, and JTAG boundary scan support in a 44-pin TQFP package. Available from stock with worldwide shipping.

8-bit Microcontrollers - MCU AVR 32K FLSH 2K SRAM 1KB EE-20MHz IND

PIC32MX120F064H-I/PT is a 32-bit PIC microcontroller with 64KB flash, 16KB RAM, USB OTG, and TQFP-64 package. Features 40 MHz CPU, 28 I/O pins, 10-bit ADC. From $4.50 in stock worldwide shipping.

MCU 8-bit ATmega AVR RISC 32KB Flash 2.5V/3.3V/5V 32-Pin VQFN EP T/R

MCP23017T-E/ML is a 16-bit I2C I/O expander providing two 8-bit GPIO ports with interrupt outputs, configurable pull-ups, and up to 10 MHz clock in a 28-pin QFN package. Expands MCU I/O over a 2-wire I2C bus with up to 8 devices per bus for 128 additional I/O lines. Available from stock with worldwide shipping.

Microchip PIC16F677T-E/SS is an 8-bit PIC16 microcontroller with 3.5 KB flash, 128-byte RAM, 18 I/O, integrated ADC, and up to 20 MHz clock in SSOP-20 package. From $0.95 in stock worldwide shipping.

PIC12C508A-04E/SM is an 8-bit PIC microcontroller with 768 bytes OTP program memory and 25 bytes RAM in a compact SOIC-8 package. Runs at up to 4 MHz with 6 I/O pins and extended temperature range support. Available from stock with worldwide shipping.

The PIC16F677-E/P is an 8-bit PIC microcontroller with 1.75 KB of Flash, 64 bytes of RAM, and 12 I/O pins, rated for extended temperature operation in a 20-pin PDIP package. It operates from 2 V to 5.5 V at up to 20 MHz and includes an 8-channel 10-bit ADC and an internal oscillator, making it a compact solution for simple embedded control designs. Suitable for appliance controls, sensor interfaces, and low-cost consumer electronics requiring extended temperature range coverage.

PIC12C508-04I/P is an 8-bit PIC12 family microcontroller with 512 words of OTP program memory, 25 bytes of RAM, and a maximum 4 MHz clock frequency. It provides 6 general-purpose I/O pins in a compact PDIP-8 package and includes an on-chip oscillator option. The device targets low-cost, space-constrained control tasks such as simple timers, switch debouncing, and appliance logic.

Microchip PIC12C508AT-04I/SM is an 8-bit PIC12 microcontroller with 768 bytes OTP program memory, 25 bytes RAM, 6 I/O pins, and a 4 MHz max clock, in a compact SOIC-8 package. Available from global distributors with worldwide shipping.

The PIC12C508A-04I/P is an 8-bit CMOS microcontroller from Microchip's PIC12 family running at up to 4 MHz. It features 512 words of program memory, 25 bytes of RAM, and 6 I/O pins in a compact 8-pin DIP package. Available with industrial temperature range and worldwide shipping.

Microchip PIC12C508A-04I/SN is an 8-bit PIC microcontroller with 512-word EPROM, 25 bytes RAM, and 4 MHz max clock in an 8-pin SOIC package. Features 6 I/O pins, internal oscillator, and watchdog timer for simple control tasks. Available with worldwide shipping.

MLF-32

The Microchip PIC12C508A-04/P is an 8-bit CMOS microcontroller in the PIC12 family running at up to 4 MHz with 512 words of OTP program memory and 25 bytes of RAM in a compact 8-pin DIP package. It offers 6 I/O pins and an on-chip oscillator for ultra-compact, low-cost control tasks. Suitable for appliance timers, simple sensor monitors, and low-complexity consumer electronics.

Microchip PIC24FJ64GB002T-I/SS is a 16-bit PIC24 microcontroller with 32 MHz clock, 64 KB Flash, 8 KB RAM, USB OTG, ADC, and XLP low-power technology in a 28-pin SSOP package. Available from stock with worldwide shipping.

MCU,SAM3X8C,84MHz,512KB Flash,LQFP144 ATSAM3X8EA-AU, 32 bit ARM Cortex M3 Microcontroller 84MHz 16 kB, 2 x 256 kB Flash, ROM, 64 + 32 kB RAM, USB 144-Pin LQFP

Microchip MCP1640T-I/MC is a synchronous boost DC-DC converter in DFN-8 package, operating from inputs as low as 1.2 V with adjustable output from 2 V to 5.5 V using PFM/PWM control. Designed for single-cell battery boost and low-voltage energy harvesting applications.

The MCP1640BT-I/MC is a synchronous boost converter from Microchip operating at 500 kHz with up to 300 mA output current. It accepts input voltages as low as 0.35 V and regulates output from 2 V to 5.5 V in adjustable mode. Housed in a compact 8-pin DFN package, it suits single-cell and energy-harvesting applications.

The MCP1640CT-I/CHY is a synchronous boost DC-DC converter in a 6-pin SOT-23 package, operating from inputs as low as 0.65V and regulated outputs from 2V to 5.5V using current-mode PWM control. It is designed for single-cell battery and energy-harvesting applications requiring high efficiency at light loads.

The PIC16F1503-I/SL is an 8-bit PIC16 microcontroller from Microchip running up to 20 MHz with 2048-word Flash, integrated ADC and DAC, operable from 2.3 V at 16 MHz, in a 14-pin SOIC package. Available from stock worldwide.

Microchip PIC32MX110F016B-I/ML is a 32-bit MIPS-based microcontroller with 16 KB flash, 4 KB RAM, 40 MHz clock, 4-channel DMA, CTMU, and integrated ADC, housed in a compact 28-pin QFN package. Ideal for embedded control applications needing 32-bit performance in a small footprint. Available from authorized distributors with worldwide shipping.

The PIC16F677-E/SO is an 8-bit PIC16 microcontroller from Microchip with 3.5 KB Flash, 128 bytes RAM, 18 I/O pins, integrated ADC and DAC, operating up to 20 MHz from 2 V supply in an SOIC-20 package. It is a compact, cost-effective solution for simple sensing and control tasks in battery-powered consumer and industrial products.

Microchip MCP3008-I/P is a 10-bit 8-channel SPI successive-approximation ADC in a PDIP-16 package, sampling at up to 200 ksps with a 2.7 V to 5.5 V supply and max conversion time of 2.78 µs. It features single-ended and pseudo-differential input modes for flexible analog acquisition. Available in stock worldwide with fast shipping.

The UTC2000/MG is a Microchip basic USB Type-C controller in a compact 16-pin QFN package for power delivery and cable orientation detection. It handles CC logic and USB Type-C plug and receptacle configurations with minimal external circuitry. Available in stock with worldwide shipping.

32-bit Microcontrollers (up to 256 KB Flash and 64 KB SRAM) with Audio and Graphics Interfaces, USB, and Advanced Analog

The PIC32MX110F016B-I/SS is a 32-bit MIPS-based microcontroller with 16 KB Flash, up to 40 MHz clock, USB, and advanced analog peripherals. It includes an ADC, DMA channels, and boundary scan in a 28-pin SSOP package. Suited for embedded control, audio, and USB-enabled IoT applications.

The PIC32MX150F128B-I/ML is a 32-bit MIPS-based microcontroller from Microchip with 128 KB Flash, 32 KB RAM, ADC, and DMA in a compact 28-pin QFN package. It runs at up to 40 MHz and supports multiple serial interfaces including SPI, I2C, and UART. Ideal for space-constrained IoT nodes, sensor hubs, and consumer electronics requiring 32-bit performance in a small footprint.

32-bit Microcontrollers (up to 256 KB Flash and 64 KB SRAM) with%D Audio and Graphics Interfaces, USB, and Advanced Analog

Atmel ATSAM3S4BA-AU, 32bit ARM Cortex M3 Microcontroller, 64MHz, 256 kB Flash, 64-Pin LQFP

The ATSAMA5D26A-CU is a high-performance 32-bit ARM Cortex-A5 MPU from Microchip, featuring a 500 MHz core with integrated cache, 32-bit external data bus, floating-point unit, low-power modes, and boundary scan. Packaged in a 14x14 mm LFBGA-289 for industrial Linux-capable embedded applications worldwide.

The MCP3221A5T-I/OT is a 12-bit successive approximation ADC with an I2C interface, accepting analog inputs from -0.3V to 5.8V in a compact 5-pin SOT-23 package. It provides high-resolution single-channel analog-to-digital conversion for microcontroller-based sensing and measurement applications.

PIC16F1718-I/SP is an 8-bit PIC16 microcontroller from Microchip with 16,384 words of Flash, 2 KB RAM, and a 32 MHz clock in a 28-pin SPDIP package. It integrates ADC and DAC channels and operates from as low as 2.3 V at 16 MHz. Suitable for sensor interfaces, motor control, and consumer embedded designs.

40-Pin, Low-Power, High-Performance Microcontrollers with XLP Technology

PIC16F877-20I/PT is a microcontroller by Microchip. Key specs include Date Of Intro: 1998-12-01; Bit Size: 8. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

The MCP1640T-I/CHY is a synchronous boost converter from Microchip operating from a 0.65V minimum input voltage with adjustable output from 2V to 5.5V and up to 95% efficiency. It uses current-mode PWM/PFM control and is housed in a compact SOT-23-6 package for space-constrained portable designs. Available worldwide with competitive pricing.

8-bit Microcontroller with In-System Programmable Flash

Microchip ATmega48V is an 8-bit AVR RISC microcontroller running at up to 10 MHz with 4 KB Flash, 512 bytes SRAM, 10-bit ADC, and 23 GPIO pins. Available in DIP-28 through-hole package, RoHS compliant, in stock with worldwide shipping.

VQFN-28

8-bit Microcontroller with Bytes In-System Programmable Flash

Microchip MIC1557YM5 TR is a CMOS RC oscillator timer in a 5-pin SOT-23 package, operating across a 2.7 V to 18 V supply range with low power consumption for timing and oscillator applications. Available from stock with worldwide shipping.

The PIC24EP128GP202-i/mm is a 16-bit PIC24EP microcontroller operating at up to 60 MHz with 128 KB flash and integrated 12-bit ADC in a 28-pin QFN package. It supports JTAG boundary scan and fixed-point DSP instructions for efficient signal processing. Available from distributors with worldwide shipping.

Microchip MCP73832T-2DCI/OT is a single-cell Li-Ion/Li-Polymer linear battery charger with programmable charge current up to 500 mA and preset 4.2 V charge termination voltage in a tiny 5-pin SOT-23 package. Features thermal shutdown at 150°C and charge status indicator output. From $0.45 in stock worldwide shipping.

MCU 8-bit/16-bit XMEGA AVR 32KB Flash Atmel ATXMEGA32E5-AU, 8 bit, 16 bit AVR Microcontroller, 32MHz, 36 kB Flash, 32-Pin TQFP

Microchip MCP73831T-2ATI/OT, Battery Charge Controller Lithium-Ion/Polymer, 500mA, 5-pin SOT-23

The PIC12F1612-E/SN is an 8-bit PIC12 microcontroller with 3.5 KB Flash, 256 bytes RAM, and a 32 MHz internal oscillator in an 8-pin SOIC package. It integrates ADC and DAC channels for mixed-signal embedded designs. Available worldwide with fast shipping.

Microcontroller,PIC16F887-I/P 20MHz PIC16F887-I/P, 8 bit PIC Microcontroller 20MHz 256 B, 8192 x 14 words Flash, 368 B RAM, I2C 40-Pin PDIP

MCP1640BT-I/CHY is a current-mode PWM boost DC-DC converter from Microchip that operates from input voltages as low as 0.65 V and delivers an adjustable output from 2 V to 5.5 V. It integrates automatic pass-through mode to maintain output even when input voltage exceeds the set output. Packaged in a 6-pin SOT-23, it targets single-cell battery-powered devices, IoT nodes, and portable consumer electronics.

PIC32MX150F128B-I/SS is a 32-bit PIC microcontroller running up to 50 MHz with 128 KB flash and 32 KB SRAM in a 28-pin SSOP package. It integrates a 10-bit ADC with 13 channels, DMA, UART, SPI, and I2C interfaces, plus USB connectivity. Suited for embedded control, human-machine interfaces, and USB-connected data acquisition designs.

MIC2005-0.5YM6 TR is a high-side USB power switch with a 500 mA current limit, operating from 2.5 V to 5.5 V, featuring active-low enable, over-current protection with auto-retry, and fault reporting in a compact 6-pin SOT-23 package for USB port protection.

PIC16F1719-I/P is a cost-effective 8-bit PIC microcontroller running at up to 32 MHz with integrated analog peripherals including ADC, DAC, and comparators. It operates from 2.3 V at 16 MHz, comes in a 40-pin DIP package, and targets consumer, industrial control, and sensor-interfacing applications.