Microchip

Microchip MCP606-I/P is a single rail-to-rail output operational amplifier with 155 kHz gain-bandwidth product in an 8-pin PDIP package. Features 80 pA maximum bias current and 75 dB minimum CMRR. From $0.55 in stock worldwide shipping.

Microchip MCP4161-503E/P is a single-channel 50 kΩ digital potentiometer with 257-position linear taper and SPI interface in an 8-pin PDIP package. It supports non-volatile wiper position storage, increment/decrement control interface, and operates from 1.8 V to 5.5 V supply rails.

The MCP41HV31-104E/ST is a single-channel 100 kΩ high-voltage digital potentiometer from Microchip with 128 positions and SPI serial control interface. It supports high-voltage wiper operation beyond standard 5 V logic rails and is housed in a 14-pin TSSOP package, suitable for programmable gain and bias adjustment in analog signal chains.

Microchip MCP6021-I/P Op Amp, 10MHz Rail-Rail, 8-Pin PDIP

MCP6032-E/MS is a micropower dual operational amplifier by Microchip, featuring extremely low bias current of 0.0001 µA and a common-mode rejection ratio of up to 93 dB. Housed in an MSOP-8 package, it delivers voltage-feedback architecture for precision signal conditioning. Suited for battery-powered sensors, medical instruments, and low-power data acquisition systems.

Microchip MCP65R41T-2402E/CHY is a single-channel push-pull output comparator with 0.85 µs response time, operating from 1.8 V to 5.5 V supply in a compact 6-pin SOT-23 package. It features ultra-low input offset voltage of 10 mV and bias current of 5 nA, ideal for battery-powered and portable designs.

Microchip MCP4013T-503E/CH is a single-channel 50 kΩ digital potentiometer with 64 wiper positions and 2-wire increment/decrement serial interface in a compact SOT-23-6 package, offering precise resistance adjustment for gain control, offset trimming, and calibration in low-power embedded systems.

The MCP3201-CI/P is a 12-bit successive approximation ADC with differential input and SPI-compatible serial interface, featuring a maximum conversion time of 7.5 µs and analog input range up to 5.1 V, packaged in PDIP-8 for straightforward prototyping and data acquisition.

The MCP6244-E/P is a quad rail-to-rail op-amp from Microchip with 550 kHz gain-bandwidth product and 75 dB typical CMRR in a 14-pin PDIP package. It operates from low supply voltages suitable for battery-powered designs. Available in stock with worldwide shipping.

SSOP-24

The MCP1826S-2502E/DB is a 1000 mA LDO linear voltage regulator with a fixed 2.5 V output at ±2% accuracy, accepting 2.3 V to 6 V input with a typical 0.25 V dropout. It is housed in a 3-pin SOT-223 package for medium-current embedded power supply designs.

Microchip MCP16301HT-E/CH is a current-mode PWM step-down DC-DC converter delivering up to 600 mA with an adjustable output from 2 V to 15 V. It accepts a wide input range of 4.7 V to 36 V, covering automotive 12 V and industrial 24 V rails. The 6-pin SOT-23 package enables very compact power supply designs.

MCP6041T-I/OT is an operational amplifier by Microchip. Key specs include Average Bias Current-Max (IIB): 0.0001 µA; Common-mode Reject Ratio-Min: 62 dB. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

MCP1702T-2502E/MB is a fixed 2.5 V, 250 mA LDO linear voltage regulator from Microchip with up to 13.2 V input and only 0.75 V typical dropout in a SOT-89-3 package. It features low quiescent current and REACH-compliant construction for industrial designs. In stock with worldwide shipping.

Microchip PIC10F202T-I/MC, 8bit PIC10F Microcontroller, 4MHz, 0.75 kB Flash, 8-Pin DFN

The MCP1320T-46LE/OT is a voltage supervisor and reset IC from Microchip with a fixed 4.6 V threshold, providing a manual reset input and asserting a system reset output when supply voltage drops below the threshold, housed in a 5-pin SOT-23 package for reliable microcontroller reset management in embedded systems.

Microchip MCP6S26-I/ST is a 6-channel SPI-programmable gain amplifier with rail-to-rail input and output, selectable gains from 1x to 32x, and 2.7 V to 5.5 V supply in a 14-pin TSSOP package.

MCP1826S-5002E/AB is an integrated circuit by Microchip. Key specs include Dropout Voltage1-Max: 0.4 V; Dropout Voltage1-Nom: 0.25 V. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Microchip PIC12F508-E/SN is an 8-bit PIC12 microcontroller running at up to 4 MHz with integrated ADC and boundary scan in a compact 8-pin SOIC lead-free package. It offers low-cost embedded control with 6 GPIO pins and simple peripherals for small automation tasks. Available from Microchip distributors with worldwide shipping.

MCP6N11-010E/SN is an operational amplifier by Microchip. Key specs include Average Bias Current-Max (IIB): 0.005 µA; Bandwidth (3dB)-Nom: 35 MHz. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

PIC12C672-04I/P is a microcontroller by Microchip. Key specs include Date Of Intro: 1997-03-24; Bit Size: 8. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

MTCH112-I/SN is an integrated circuit by Microchip. Key specs include JESD-30 Code: R-PDSO-G8; JESD-609 Code: e3. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

In-Circuit Serial Programming (ICSP™) • Internal 4 MHz oscillator with programmable calibration • Selectable clockout • Power-on Reset (POR) • Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) • Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation • Programmable code protection • Power saving SLEEP mode • Interrupt-on-pin change (GP0, GP1, GP3) • Internal pull-ups on I/O pins (GP0, GP1, GP3) • Internal pull-up on MCLR pin • Selectable oscillator options: - INT

PIC12CE519-04/P is a microcontroller by Microchip. Key specs include Date Of Intro: 1996-05-10; Bit Size: 8. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

MCP7940M-I/MS is a Microchip real-time clock and calendar IC in an 8-pin MSOP package, featuring I2C serial interface at 32 kHz, 64-byte SRAM, and interrupt output for low-power timekeeping applications.

Microchip PIC10LF322T-I/OT is an ultra-compact 8-bit PIC microcontroller with 896 bytes Flash, integrated ADC, and a maximum clock of 20 MHz in a 6-pin SOT-23 package. It operates from as low as 1.8 V at 16 MHz, making it ideal for miniature, battery-powered applications. This tiny MCU is a cost-effective solution for simple control, lighting, and IoT edge nodes.

Microchip PIC12C671-04I/P is an 8-bit OTP PIC microcontroller clocked up to 4 MHz with 1.75 kB of one-time programmable memory, an integrated ADC, and 8 pins in a DIP-8 through-hole package. Ideal for cost-sensitive embedded control tasks requiring analog input capability in a minimal footprint.

Microchip MTCH101T-I/OT is a capacitive proximity sensor IC operating from a 2 V to 5.5 V supply in a compact 6-pin SOT-23 package. It provides single-channel touch or proximity detection without requiring external microcontroller firmware. Available from stock with worldwide shipping.

MTD6508-ADJE/JQ is a Microchip sensorless 3-phase brushless DC motor driver designed for fan and pump applications. It delivers up to 1 A output current per phase and includes adjustable speed control. Housed in a compact 16-pin UQFN package for space-constrained cooling system designs.

PIC10F220T-I/MC is a Microchip 8-bit RISC PIC10F microcontroller running up to 8 MHz with 384 bytes of Flash program memory and 16 bytes of SRAM, packaged in a tiny 8-pin DFN for space-critical embedded control and sensor applications.

MCP6V26-E/SN is an operational amplifier by Microchip. Key specs include Average Bias Current-Max (IIB): 0.005 µA; Common-mode Reject Ratio-Min: 125 dB. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Microchip MCP9701A-E/TO is a linear active thermistor IC in a through-hole TO-92-3 package that converts temperature to an analog voltage. It provides a 19.5 mV/°C sensitivity with ±4°C accuracy from -40°C to +125°C. Low cost and simple interface make it ideal for temperature monitoring in consumer and industrial applications.

Microchip MCP6561RT-E/OT is a single-channel comparator operating from 1.8V supply with ultra-low 5 nA bias current. It features push-pull output and 10 mV input offset voltage in a compact 5-pin SOT-23 package for portable and battery-operated designs.

MTCH108-I/SS is a Microchip 8-channel capacitive touch controller IC designed for single-electrode touch sensing applications. It supports up to 8 independent capacitive touch inputs and comes in a 20-pin SSOP package. Ideal for consumer appliances, HMI panels, and industrial control interfaces requiring reliable touch detection without a microcontroller.

PIC10F202-I/P is a microcontroller by Microchip. Key specs include Bit Size: 8; CPU Family: PIC10. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

MCP9701-E/TO is a temperature sensor by Microchip. Key specs include Accuracy-Max (Cel): 6 Cel; Body Height: 4.826 mm. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

MICROCHIP - MTCH6102-I/SS - CAPACITIVE TOUCH SENSOR, 15 CH, SSOP-28

Microchip MTCH6102-I/MV is a capacitive proximity and touch sensor controller operating from 1.8 V to 3.6 V supply. It integrates gesture recognition and touch detection in a 28-pin UQFN package with a 260 °C peak reflow temperature rating. Designed for low-power human interface applications requiring reliable proximity detection without mechanical contacts.

Microchip MTCH105-I/ST is a 5-channel capacitive touch controller with simple I/O output interface. It supports direct open-drain outputs for each touch input without requiring firmware or external MCU for basic touch detection. Available in a 14-pin TSSOP package for compact HMI designs.

Linear battery charge controller for single-cell Li-Ion and Li-Polymer batteries with programmable charge current and preconditioning. Integrates charge status outputs, thermal regulation, and automatic recharge detection in a compact 10-pin DFN package. Available from Microchip in RoHS-compliant packaging with worldwide stocking.

MCP73833-BZI/UN is a highly integrated single-cell lithium-ion and lithium-polymer battery charger IC from Microchip, available in a 10-pin MSOP package, supporting a programmable charge current up to 1 A with thermal regulation and preconditioning for deeply discharged cells.

MCP9802A0T-M/OT is a Microchip digital temperature sensor with I2C/SMBus interface and up to 12-bit resolution. It features a programmable alert output and ±3°C maximum accuracy over its operating range. Supplied in a miniature SOT-23-5 package suited for space-constrained thermal monitoring applications.

MTCH101-I/OT is a single-channel capacitive touch sensor IC from Microchip, designed to replace mechanical buttons with a reliable touch interface. It provides a current output and operates in a compact SOT-23-6 package measuring 2.9 mm × 1.55 mm, making it ideal for low-profile consumer and industrial touchpad designs.

Use the download button to access the MCP73833-GPI/UN schematic symbol, PCB footprint, and 3D model.

PLASTIC, MSOP-8

MCP8063-E/MD is an integrated circuit by Microchip. Key specs include Analog IC - Other Type: 3-PHASE BRUSHLESS DC MOTOR...; JESD-30 Code: S-PDSO-N8. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Microchip MCP6N11T-001E/MNY is a CMOS instrumentation amplifier with 35 MHz bandwidth, 3 mV maximum input offset voltage, and 62 dB minimum CMRR operating up to 5.5 V supply. It offers rail-to-rail input and output for single-supply sensor signal conditioning. Available in compact 8-pin TDFN package with worldwide shipping.

Microchip MCP9502PT-065E/OT Temperature Sensor Switch 5-Pin SOT-23, -40 → +125 °C

MCP8025-115E/PT is a 3-phase brushless DC motor gate driver from Microchip with integrated LIN interface, supporting 6-step commutation and featuring a 48-pin TQFP package for compact industrial and automotive BLDC motor control designs.

MCP79522-I/MS is a clock IC by Microchip. Key specs include Additional Feature: ALSO OPEARTES AT 1.8V MIN SUPPLY...; Clock Frequency-Max: 0.032 MHz. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.