Microchip

Microchip TC1015-2.5VCT713, LDO Voltage Regulator, 0.1A, 2.5 V ±0.5%, 2.7 → 6 Vin, 5-Pin SOT-23

MCP42010-E/P, Digital Potentiometer 10kΩ 256-Position Linear 2-channel Serial-SPI 14-Pin PDIP

MCP1403-E/P is a dual high-speed MOSFET gate driver from Microchip with Schmitt-trigger inputs and buffer/inverter topology. Each channel can source and sink peak currents of up to 4 A to drive large power MOSFETs at high switching frequencies. Supplied in a through-hole 8-pin DIP package for easy prototyping and industrial power applications.

Microchip MCP14A0153-E/MS, Dual MOSFET Power Driver 1.5A, 4.5 → 18 V, Dual Inverting, 8-Pin MSOP

SPDIP-28

Microchip MCP39F511N-E/MQ Energy Measurement IC, 10 bit, 28-Pin QFN

The PIC18LF4523-I/P is a low-voltage 8-bit PIC18 microcontroller from Microchip in a 40-pin DIP package, operating from 2 V to 5.5 V at up to 40 MHz, with an on-chip ADC and extensive peripheral set for embedded control applications.

MCP3202-CI/P is a Microchip 12-bit successive approximation ADC with differential inputs, SPI interface, and up to 5.5 V analog input in an 8-pin PDIP package. It achieves a maximum conversion time of 6.66 µs and linearity error of 0.0488%. Available from authorized distributors with worldwide shipping.

QFP-208

Microchip DSPIC33EP16GS202-I/SS, 16bit Digital Signal Processor 120MHz 16 kB Flash 28-Pin SSOP

DIP-8

Use the download button to access the LAN9355/ML schematic symbol, PCB footprint, and 3D model.

Microchip MCP14A0154-E/MS, Dual MOSFET Power Driver 1.5A, 4.5 → 18 V, Dual Non-Inverting, 8-Pin MSOP

Microchip PIC16F883T-I/SS is an 8-bit PIC16 microcontroller running up to 20 MHz with integrated ADC, USART, SPI, I2C, and PWM peripherals in a 28-pin SSOP package, operating from 2.0 V to 5.5 V supply for embedded control, sensor acquisition, and low-power consumer applications.

Microchip MCP1700T-1802E/TT is a low-dropout linear voltage regulator delivering a fixed 1.8 V output at up to 200 mA from a 2.3 V to 6 V input supply with only 150 mV typical dropout voltage. Packaged in a 3-pin SOT-23, it provides ±2% output accuracy and REACH-compliant Pb-free construction for battery-powered IoT and portable electronics.

Microchip KSZ9021GN, 1000BASE-T, 100BASE-TX, 10BASE-T, IEEE 802.3 Ethernet Transceiver, 1.2 V, 3.3 V, 64-Pin QFN

Microchip MCP1404-E/P is a dual-channel high-speed MOSFET gate driver capable of sourcing and sinking 4 A peak current with Schmitt-trigger inputs for noise immunity. It supports both high-side and low-side MOSFET drive and operates from a 4.5 V to 18 V supply in an 8-pin PDIP package. Suited for synchronous buck converters, motor drives, and power inverter stages.

The MCP1405-E/P is a dual MOSFET power driver from Microchip with 4.5 A peak drive current and 4.5 V to 18 V operating range in an 8-Pin PDIP package. It features Schmitt trigger inputs and high-side drive capability for reliable switching in noisy environments. Available with 8-week lead time for prototype and production power design.

DSPIC33FJ64GP202-I/SP is a 16-bit dsPIC33F digital signal controller from Microchip with 40 MIPS performance, 64 KB Flash, 16 KB RAM, and a hardware DSP engine, packaged in a 28-pin SPDIP for motor control and power conversion designs.

ROHS COMPLIANT, TO-220, 5 PIN

ATTINY25-20SH is a Microchip integrated circuit for industrial electronics. It offers 2 pins, 8-bit logic function, supporting reliable assembly in compact electronic equipment. From quote-based pricing, request stock for worldwide shipping.

Microchip 93LC46B/P Serial EEPROM Memory, 1kbit, 2.5 → 6 V 8-Pin PDIP

Microchip DSPIC33FJ32GP302-I/SP is a 16-bit dsPIC digital signal controller running at 40 MIPS with 32 KB Flash, hardware barrel shifter, integrated ADC and DAC channels, and JTAG boundary scan in a 28-pin SPDIP package for real-time control and DSP applications.

The LAN9353I/PT is a 3-port 10/100 Ethernet switch controller by Microchip, featuring integrated PHYs, IEEE 802.3 compliance, and low-power design. It offers flexible MII/RMII interfaces, VLAN support, and QoS traffic management. Available in TQFP-64 package with industrial temperature range.

Microchip 93LC46B/SN EEPROM Memory, 1kbit 8-Pin SOIC

The 24LC1025-I/P is a 1 Mbit I2C serial EEPROM from Microchip, organized as 128K x 8 bits and operating from a 2.5 V to 5.5 V supply with up to 1 MHz clock frequency. It offers 200-year data retention, 1,000,000 write/erase endurance cycles, and comes in an 8-pin PDIP package for prototyping and through-hole designs.

93LC76C-I/P is a Microchip 8 Kbit (1K x 8-bit) serial EEPROM with 3-wire SPI interface and up to 2 MHz clock frequency for non-volatile data storage. It features 1,000,000 write/erase cycles endurance and 200-year minimum data retention. Available in an 8-pin DIP package, it suits embedded systems needing compact, low-cost configuration storage.

The Microchip DSPIC33EP16GS202-I/SO is a 16-bit digital signal controller running up to 70 MIPS from a 60 MHz oscillator with 16 KB Flash in a 28-pin SOIC package. It features a barrel shifter, multiple internal bus architecture, and boundary scan for high-speed embedded control. Well suited for SMPS, motor control, and power conversion designs requiring deterministic real-time DSP performance.

Microchip PIC24FV32KA302-E/SO is a 16-bit PIC24 microcontroller with 32 KB Flash, 2 KB RAM, 512 bytes EEPROM, and a 12-bit ADC, running up to 32 MHz from a 5 V supply. It integrates CTMU for touch sensing and capacitive measurement, offering a rich peripheral set in a 28-pin SOIC package. Designed for industrial, metering, and sensing applications requiring 5 V operation.

Microchip 93LC66B-I/P is a 4Kbit serial EEPROM with SPI-compatible interface, operating from 2.5V to 5.5V. It offers 1 million erase/write cycles and over 200 years data retention in an 8-pin PDIP package for non-volatile storage applications.

Microchip DN2625DK6-G N-channel MOSFET Transistor, 1.1 A, 250 V Depletion, 8-Pin DFN

The 24LC01B-I/SN is a Microchip 1 Kbit (128 x 8) I2C serial EEPROM in an 8-pin SOIC. It offers 400 kHz operation, 1,000,000 write cycles, and 200-year data retention. In stock with worldwide shipping.

The PIC32MZ2048EFH064T-250I/PT is a high-performance 32-bit PIC32MZ microcontroller from Microchip featuring an FPU, 2 MB Flash, 512 KB RAM, and operation up to 252 MHz. It integrates USB-HS, Ethernet, CAN, SQI, and 12-channel DMA in a 64-pin TQFP package for demanding embedded applications.

Microchip 93LC46C-I/P is a 1-kbit serial EEPROM with 3-wire Microwire interface, 1,000,000 write/erase cycle endurance, and 200-year data retention, operating from 2.5 V to 5.5 V in an 8-pin PDIP package.

The PIC32MZ2048EFG100-I/PF is a 32-bit MIPS-based microcontroller from Microchip featuring 2048 KB flash, 512 KB RAM, and a 64 MHz maximum clock in a 100-pin TQFP package. It includes 12-channel dedicated DMA, 160 KB boot flash, ADC, and JTAG boundary scan, available in stock with worldwide shipping.

Microchip PIC32MZ2048EFG064-I/PT is a 32-bit PIC32 MCU with 2048 KB Flash, 512 KB RAM, and 64 MHz clock, featuring 12-channel DMA, ADC, and boundary scan in a 64-pin TQFP package for high-performance embedded control applications.

Microchip 25LC640A-I/P is a 64 Kbit SPI serial EEPROM in an 8-pin DIP package offering up to 10 MHz clock frequency and 1,000,000 write/erase cycle endurance. With a data retention of 200 years and 2.5 V minimum operation, it is ideal for non-volatile configuration and parameter storage in embedded systems.

The 25LC320A-I/P is a 32 Kbit SPI serial EEPROM from Microchip operating on 2.5 V to 5.5 V supply. It offers a maximum 10 MHz clock frequency, 200-year data retention, and 1,000,000 write/erase cycle endurance. Packaged in an 8-pin PDIP, it suits industrial and consumer non-volatile memory applications.

Microchip 25LC512-I/P is a 512 Kbit SPI serial EEPROM operating from 2.5 V to 5.5 V with up to 20 MHz clock frequency in an 8-pin PDIP package. It provides 1,000,000 write/erase cycle endurance and 200-year minimum data retention. Ideal for configuration storage, logging, and calibration in embedded systems and industrial controllers.

PIC18LF452-I/PT is an 8-bit PIC18 microcontroller from Microchip running up to 40 MHz with ADC and a rich peripheral set, operable down to 2 V at 4 MHz for low-power designs. It comes in a 44-pin TQFP package measuring 10 x 10 mm. Suited for industrial control, data acquisition, and battery-powered embedded systems.

The Microchip 25LC128-I/P is a 128 Kbit SPI-compatible serial EEPROM with a 160 ns access time and a wide supply range from 2.5 V to 5.5 V. It supports up to 10 MHz clock frequency and provides 1,000,000 write/erase cycles with 200-year data retention, housed in a through-hole PDIP-8 package.

The 25LC080B-I/P is an 8 Kbit SPI serial EEPROM from Microchip with 100 ns read access time and 2.5V to 5.5V supply range. It supports up to 10 MHz SPI clock, 1,000,000 write/erase cycles, and 200-year data retention minimum. Available in an 8-pin PDIP package with worldwide shipping.

Microchip 25LC040A-I/P is a 4-Kbit (512-byte) SPI serial EEPROM with up to 10 MHz clock speed, 2.5 V to 5.5 V supply, and 200-year data retention in an 8-pin PDIP package. It supports 1,000,000 write/erase cycles with an 80 ns read access time and hardware write-protect pin. Available from stock worldwide for non-volatile configuration storage in embedded and industrial designs.

ATtiny 25V-10PU is a Microchip integrated circuit for industrial electronics. It offers 2 pins, 8-bit logic function, supporting reliable assembly in compact electronic equipment. From quote-based pricing, request stock for worldwide shipping.

8-bit Microcontrollers - MCU 7KB Flash, 512B RAM, 256B EE, 10b ADC2, DAC, Comp, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, ZCD, PPS, EUSART, 2xSPI/I2C, IDLE/DOZE/PMD

LDO Regulator Pos 5V 0.4A Microchip MIC2920A-5.0WS-TR, LDO Voltage Regulator, 400mA, 5 V ±4%, 2 → 26 Vin, 3 + Tab-Pin SOT-223

Micrel MIC4428YMM, Dual MOSFET Power Driver 1.5A, 4.5 → 18 V, 8-Pin MSOP

The PIC18F25K80T-I/SS is an 8-bit PIC18F microcontroller in 28-pin SSOP package, running at up to 64 MHz with 32 KB Flash and integrated CAN bus controller. It targets automotive and industrial applications requiring reliable serial networking with a compact footprint.

The 25LC020A-I/P is a 2 Kbit SPI serial EEPROM from Microchip Technology in an 8-pin DIP package. It offers a 10 MHz SPI clock, 1,000,000 write/erase cycle endurance, and 200-year data retention, making it ideal for low-cost non-volatile configuration storage in embedded systems.

SY89295UTG, Delay Line 14.8ns, 32-Pin TQFP