Maxim Integrated

nanoPower, 4-Bump UCSP/SOT23, Precision Current-Sense Amplifier

nanoPower, 4-Bump UCSP/SOT23, Precision Current-Sense Amplifier

MAX9938TEUK+ is a 5-Pin 10A amplifier by Maxim Integrated. Key specs: 5-Pin, 10A, 5 pins. From quote-based pricing, in stock with worldwide shipping for production sourcing.

nanoPower, 4-Bump UCSP/SOT23, Precision Current-Sense Amplifier

Translation - Voltage Levels Single- and Dual-Channel, Bidirectional Low-Level Translators

MAXIM INTEGRATED PRODUCTS - MAX1481EUB+T - Transceiver RS422, RS485, 4.75V-5.25V supply, 1 Driver, µMAX-10

RS-422/RS-485 Interface IC Software-Selectable, Half-/Full-Duplex, Slew-Rate-Limited, 12Mbps, RS-485/RS-422 Transceivers in MAX

MAXIM INTEGRATED PRODUCTS - MAX9820ETB+T - Audio Power Amplifier, DirectDrive, 95 mW, 2 Channel, 2.7V to 5.5V, TDFN, 10 Pins

MAXIM INTEGRATED PRODUCTS - MAX15024AATB+T - MOSFET Driver, 4.5V-28V supply, 8A output, TDFN-10

Microphone Amplifier with AGC and Low-Noise Microphone Bias

MAXIM INTEGRATED PRODUCTS - MAX14626ETT+T - CURRENT LOOP PROTECTOR, TDFN-6

MAXIM INTEGRATED PRODUCTS - MAX98357AETE+ - AMPLIFIER, CLASS-D, 1-CH, 3.2W, TQFN-16

Digital Isolators Six Channel 600vrms Digital Isolator

MAXIM INTEGRATED PRODUCTS - MAX14850ASE+ - DIGITAL ISOLATOR, 6-CH, 30NS, NSOIC-16

+5V Power-Supply Voltages ● Fully Specified Over Temperature ● Available in Three Output Configurations • Open-Drain RESET Output (MAX803) • Push-Pull RESET Output (MAX809) • Push-Pull RESET Output (MAX810) ● 140ms (min) Power-On-Reset Pulse Width ● 12μA Supply Current ● Guaranteed Reset Valid to VCC = +1V ● Power Supply Transient Immunity ● No External Components ● 3-Pin SC70 and SOT23 Packages ● AEC-Q100 Qualified. Refer to Ordering Information for Specific /V Versions.

5-Pin Microprocessor Supervisory Circuits With Watchdog Timer and Manual Reset

3-Pin Microprocessor Reset Circuits

Precision, Low-Power, Temperature Sensors and Voltage References

Maxim Integrated MAX6008AESA+T is a precision two-terminal shunt voltage reference drawing only 1 µA quiescent current with a 2.5 V output in an 8-pin SOIC package, ideal for ultra-low-power ADC reference and battery-powered measurement circuits.

MAX6008AESA+ is a precision shunt voltage reference from Maxim Integrated providing a fixed 2.5 V output with ±30 ppm/°C temperature coefficient in an 8-pin SOIC package. It offers high accuracy with output range 2.495 V to 2.505 V and low operating current. Available in stock for worldwide shipping.

Maxim Integrated MAX4514CUK+T is a single-channel SPST CMOS analog switch in a 5-pin SOT-23 package operating from low supply voltages with low on-resistance. It switches analog signals in battery-powered and portable designs with minimal signal distortion. Available from authorized distributors with worldwide shipping.

Maxim Integrated MAX14803AEWZ+T is a 16-channel, high-voltage analog switch IC with low charge injection and 50 dB off-state isolation in a 110-WLCSP package. It integrates 16 SPST switch functions in a single compact device. From $3.50 in stock with worldwide shipping.

Maxim Integrated MAX14802CCM+T is a 16-channel SPST analog switch IC with low charge injection and high-voltage capability packaged in a 48-pin LQFP. Features 50 dB off-state isolation, 48 Ω maximum on-resistance, and 26 Ω matching for precise signal routing. Available in tape-and-reel with worldwide distribution.

Maxim Integrated MAX14803CCM+T is a 16-channel high-voltage SPST analog switch IC with low charge injection, housed in a 48-LQFP (7x7x1.4 mm) package. Provides 50 dB off-state isolation in a single compact IC for precision signal switching. Available in stock with worldwide shipping.

Maxim Integrated MAX14802CCM+ is a 16-channel SPST analog switch in a 48-pin TQFP package with 50 dB off-state isolation for precision signal routing. It is designed for high-density multiplexing in data acquisition and test equipment. Available from stock with worldwide shipping.

Maxim MAX3488AEGSA+ is a half-duplex RS-485/RS-422 line transceiver in an 8-pin SOIC package operating from a 3.0 to 3.6 V supply. Features differential Schmitt trigger inputs and supports data rates up to 250 kbps for robust industrial communication. Available in stock worldwide for fast delivery.

Maxim MAX3483AEASA+ is a single-channel RS-485/RS-422 line transceiver with differential Schmitt trigger inputs operating from a 3 V to 3.6 V supply in an 8-pin SOIC package. It supports half-duplex RS-485 communication with 1/8 unit load receiver for up to 256 nodes on a single bus. Available from stock worldwide with competitive pricing for industrial and commercial designs.

The MAX3490AEGSA+ is a Maxim Integrated RS-485/RS-422 line transceiver powered at 3.3V with ±20kV ESD protection and 20 Mbps data rate. It features a differential Schmitt trigger input and slew-rate limiting to reduce EMI in an 8-pin SOIC package. Available from authorized distributors with worldwide shipping.

Maxim MAX3485AEASA+ is a 3.3 V RS-485/RS-422 half-duplex line transceiver in an 8-pin SOIC package with differential Schmitt trigger receiver inputs and one driver plus one receiver channel. It supports data rates up to 10 Mbps over twisted-pair cables in industrial communication networks. Available globally from authorized distributors with fast worldwide shipping.

Maxim MAX4899AEETE+T is a USB 2.0 high-speed fault-tolerant 3:1 and 4:1 multiplexer in a 16-pin QFN package. Supports data rates up to 480 Mbps with integrated ESD protection and overvoltage fault tolerance. From $1.80 in stock with worldwide shipping.

Maxim Integrated MAX641BCSA+ is a PWM voltage-mode switching regulator IC with 2V to 16.5V input range and 450mA maximum output current in an 8-pin SOIC package. Provides regulated 5V output for battery-powered and portable system designs. Available from stock with worldwide shipping.

Maxim DS1818R-20+T&R is a single-channel MPU supervisor IC with 2.55V reset threshold, 150ms reset delay, and active-low open-drain output in a SOT-23-3 package. Supports 1V to 5.5V supply range with manual reset input. Available from stock worldwide with fast shipping.

Maxim Integrated MAX191BCWG+ is a low-power 12-bit successive approximation ADC with internal reference and power-down mode, featuring up to 18 µs conversion time, ±5.25 V analog input range, and a 24-SOIC wide-body package, designed for precision data acquisition in battery-powered and portable instrumentation.

Maxim Integrated MAX14753EUE+ is an 8-channel or dual 4-channel analog multiplexer rated for ±36 V supply and 72 V signal switching. Housed in a 16-pin TSSOP package, it supports differential multiplexing with rail-to-rail signal handling, making it ideal for industrial data acquisition, ATE equipment, and high-voltage sensor signal routing applications.

The MAX14752EUE+ is a high-voltage analog multiplexer IC from Maxim Integrated configurable as an 8-channel or dual 4-channel switch supporting up to 72 V rail-to-rail signal routing. Housed in a 16-pin TSSOP package, it operates across a ±36 V dual-supply range and suits industrial test, measurement, and data-acquisition systems.

The MAX14780EEPA+ is a single-driver RS-422/RS-485 line transceiver from Maxim Integrated operating on a 4.5 V to 5.5 V supply with Schmitt-trigger inputs and differential output, housed in an 8-pin DIP package for robust industrial serial communications.

Maxim MAX14780EESA+ is a single-driver RS-422/RS-485 line transceiver operating from a 4.5 V to 5.5 V supply with Schmitt trigger inputs in a compact NSOIC-8 package, enabling robust differential data transmission in industrial networking and control applications.

The MAX30101EFD+ is an integrated pulse oximetry and heart rate sensor IC from Maxim Integrated, housed in a compact 14-pin LGA cavity package (3.3 mm × 5.6 mm × 1.55 mm). It combines red, infrared, and green LEDs with a photodetector and analog front-end in a single module, enabling SpO2 and heart rate measurement at low supply current. Ideal for wearable health monitors, fitness trackers, and medical-grade patient monitoring devices.

MAXIM INTEGRATED PRODUCTS - MAX9714ETJ+ - Audio Power Amplifier, Filterless, Spread Spectrum, 6 W, D, 2 Channel, 10V to 25V, TQFN, 32 Pins

Maxim Integrated MAX98306ETD+T is a stereo Class D audio amplifier IC delivering 3.7W per channel with 18dB fixed gain, 22kHz bandwidth, and 2-channel output in a compact 14-pin TQFN package. It operates from a single supply for efficient portable audio designs. Available in stock worldwide with fast shipping.

MAX291ESA+ is an 8th-order Butterworth switched-capacitor low-pass filter IC by Maxim Integrated in an 8-pin NSOIC package. Key specs: 4.75 V to 11 V supply range, single-supply or dual ±5 V operation, clock-tunable cutoff frequency. Suitable for anti-aliasing, data acquisition, and audio signal filtering in precision analog systems.

ADC

3 X 3 MM, ROHS COMPLIANT, TDFN-10

Analog to Digital Converters - ADC Low-Cost, 2-Channel, +/-14-Bit Serial ADCs

MAXIM INTEGRATED PRODUCTS - MAX11167ETC+T - ADC, 1-CH, SAR, 16BIT, 250KSPS, TDFN-12

2.80 X 2.90 MM, ROHS COMPLIANT, SOT-23, 6 PIN

Analog to Digital Converters - ADC Dual, 2.2V to 3.6V, 12-Bit, 3MSPS SAR ADC in tiny QFN package

MAXIM INTEGRATED PRODUCTS - MAX986EUK+T - COMPARATOR, R TO R, SINGLE, 300NS, SOT23

MAX3668EHJ+ is a Maxim Integrated Diode for rectification, voltage clamping, reverse-polarity protection, and power conversion. It combines 0°C to 0°C with Quad Flat Packages with 33 pins. FindMyChip supports technical sourcing, stock checks, and worldwide shipping for this part.

Low-Current I2C RTCs for High-ESR Crystals