Maxim Integrated
Maxim Integrated is a leading electronic component manufacturer. FindMyChip sources Maxim Integrated ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
1,878
Total Products
11
Categories
All Maxim Integrated Components
Showing 1,851–1,878 of 1,878
Complete, Isolated RS-485/RS-422 Data Interface
Complete, Isolated RS-485/RS-422 Data Interface
ADC,+/-18 bit,Serial,SDIP24,MAX132CNG+ MAX132CNG+, 18 bit ADC Differential, Serial, 24-Pin PDIP
I.C. MAX118CAI MAX118CAI+, 8 bit ADC, Parallel, 28-Pin SSOP
Maxim Integrated MAX44299UWE is a precision current and voltage sense IC with integrated power measurement capability in a compact BGA package. It features a high-accuracy bidirectional current sensor with an integrated 12-bit ADC and I2C digital interface for real-time power monitoring. Suitable for battery management systems, servers, and industrial power monitoring applications.
Maxim MAX20078AUE/V+ is a synchronous buck controller IC designed for high-power LED drivers, supporting wide input voltage ranges in a 16-pin TSSOP-4.4 mm package. It provides dual-output LED current control with open-drain outputs and high-efficiency synchronous switching. From $2.50 in stock, worldwide shipping available.
Maxim Integrated MAX262BCWG+ is a microprocessor-programmable dual switched-capacitor universal active filter supporting cutoff frequencies from 1.4 Hz to 140 kHz and operating from ±5 V or single 5 V supply in a 24-SOIC package. Available with worldwide shipping.
LDO Voltage Regulators Dual, Low-Dropout, 100mA Linear Regulators
MAX4519CSD+ is a Maxim Integrated Integrated Circuit for OEM production, repair, and approved BOM replacement. Key specs: 14 pins, 70°C; package: Small Outline Packages / 14-SOIC_N-150_MIL. FindMyChip supports inquiry-based sourcing, inventory checks, and worldwide shipping.
Maxim MAXM15462AMB+T is a 4.5V to 42V input, 300mA integrated step-down power module with inductor in a compact 3x2.6x1.5mm BGA package. Employs current-mode PWM control for stable regulation across wide load conditions. Available on tape and reel for automated assembly with worldwide distribution.
MAX9768BETG/V+ is a Maxim Integrated integrated circuit for embedded electronics, industrial modules, and repair BOMs. Key specs include 24 pins, 24-LFCSP-4X4X0.75, -40°C to 85°C operating range. From RFQ pricing with in-stock sourcing and worldwide shipping support.
MAX17536ATP+ is an integrated circuit from Maxim Integrated for embedded control and signal-processing. It provides 20 pins in Quad Flat No-Lead format for repeatable production sourcing. From $0.00 in stock worldwide shipping.
MAX16814AUP/V+ is a Maxim Integrated integrated circuit for industrial electronics and embedded systems. Key specs include 20 pins, -40 deg C to 125 deg C, and 20-TSSOP_4.4_EP-4.4_MM. From quoted pricing with in stock worldwide shipping.
MAX20751EKX+ is a Maxim Integrated power-management component for regulated power conversion designs. It supports 1 channel in a Quad Flat No-Lead package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.
Real Time Clock I C Serial Real-Time Clock
Maxim Integrated MAX14945EWE+ is a galvanically isolated RS-485/RS-422 transceiver with 1-channel full-duplex capability in a 16-pin wide SOIC package, supporting data rates up to 1 Mbps with Schmitt trigger inputs and EIA-485/EIA-422 compliance. Provides ±15 kV ESD protection and 2500 Vrms isolation. Available from stock worldwide with fast shipping.
Maxim Integrated MAX1300AEUG+ is a 16-bit successive approximation ADC with 8 or 4 input channels supporting ±3× VREF multirange analog inputs from -12.168 V to +12.408 V. Features 9.4 µs maximum conversion time and linearity error of 0.0031% in a 24-pin TSSOP package. Available globally from authorized distributors with competitive pricing and worldwide shipping.
The MAX9979KCTK+D is a dual-channel 1.1 Gbps pin electronics IC with integrated PMU and 16-bit level-setting DACs in a compact 68-pin QFN package, designed for automated test equipment. It supports serial binary input format and ±4.75V supply rails. Available in stock with worldwide shipping.
Maxim MAX3483CSA+T is a 3.3 V powered RS-485/RS-422 transceiver with slew-rate limiting for up to 10 Mbps data rates, featuring a differential Schmitt trigger receiver and 8-SOIC package for robust industrial serial communication designs.
The MAX4781ETE+T is a high-speed, low-voltage 8-channel single-ended CMOS analog multiplexer with 0.7 Ohm on-resistance in a 16-pin LFCSP package. It operates on low-voltage supply rails and delivers fast switching for signal routing in data acquisition and communications systems. Available from authorized distributors with worldwide shipping.
Maxim MAX766CSA+ is an inverting DC-DC converter operating from a 3 V to 16 V input to generate adjustable negative output voltages from -1 V to -16 V in an 8-pin SOIC package. It uses current-mode pulse frequency modulation control for efficient light-load performance. Available from stock with worldwide shipping.
DS1100LZ-100+, Delay Line, 5-Taps 100ns, 8-Pin SOIC
Maxim Integrated MAX4477ASA+T is a wide-band, rail-to-rail output operational amplifier in an 8-SOIC package with 90 dB minimum CMRR and 0.00015 µA maximum bias current. It delivers low-noise, high-precision voltage-feedback amplification. Available from stock with worldwide shipping.
MAX4639EUE+T is a Maxim Integrated low-voltage analog multiplexer offering a single 8:1 or dual 4:1 configuration with a low on-resistance of 3.5 Ω across a ±2.5 V dual supply. It switches analog signals in the audio and sensor front-end frequency range with minimal signal distortion and rail-to-rail signal capability. Packaged in a 16-pin TSSOP for compact data-acquisition and test instrumentation designs.
Maxim Integrated MAX13235EETP+ is a 2-driver/2-receiver RS-232 transceiver operating at up to 3 Mbps with low-voltage 1.8 V logic interface in a 20-pin QFN package. From $3.10 in stock with worldwide shipping.
I/O Controller Interface IC Eight-Channel 1-Wire Master
Maxim Integrated MAX4896ATP+ is an 8-channel relay and load driver in a compact 20-pin QFN (5x5x0.75 mm) package with open-drain outputs and built-in transient, thermal, over-voltage, and short-circuit protection. It interfaces directly with microcontrollers to drive relays, solenoids, and other inductive loads. Available from authorized distributors with worldwide shipping.
1Kb Add-Only Memory
Need Maxim Integrated Components?
Get competitive quotes from authorized China distributors
Request a Quote