Analog Devices

LED Lighting Drivers Ultra-Efficient Charge Pumps for Six White/RGB LEDs in 3mm x 3mm Thin QFN

Analog Devices AD775JR, ADC

45V, 400mA, Low-Quiescent-Current Linear Regulator with Adjustable Reset Delay

Analog Devices AD7723BSZ, 16-Bit Serial ADC Differential Input, 44-Pin MQFP

LT1568IGN is a dual 4th-order active low-pass and band-pass filter IC from Analog Devices with a cutoff frequency range of 200 kHz to 10 MHz, operating from a single 5 V or 3 V supply in a 16-pin SSOP package. It can be configured as a single 4-pole or matched pair of 2-pole Butterworth filters. Available from stock worldwide with competitive pricing.

SP Amp Current Sense Amp Single 5.5V 8-Pin MSOP Tube

Audio DSPs Audio Click-Pop Suppressor

Gate Drivers IGBT Gate Driver w/ Slew Rate Control

Switching Voltage !! Regulators 26A Single or 13A Dual DC/DC uModule Regulator

Analog to Digital Converters - ADC 14-Bit 155 MSPS 1.8V Serial Output

Clock Drivers & Distribution 1:2 Differential PECL/ECL/LVPECL/LVECL Clock and Data Driver

ADI

LDO Voltage Regulators Low-Noise, Low-Dropout, 150mA Linear Regulators in SOT23

Analog Devices LTC4331IUFD#TRPBF is an I2C slave device extender that bridges I2C bus signals over a rugged EIA-485 differential link. It supports up to 400 kHz fast-mode I2C communication over long-distance cabling. Housed in a compact 20-lead 4 mm x 5 mm QFN package.

DAC 2-CH 12-bit 8-Pin MSOP

Clock Synthesizer / Jitter Cleaner Ultralow Noise and Spurious 0.35GHz to 6GHz Fractional-N Synthesizer

The LTC4331HUFD#PBF is an EIA-485 differential line transceiver from Analog Devices featuring differential input and output, 1-bit driver architecture, and a 20-pin QFN package, designed for robust long-distance industrial communication over RS-485 networks.

MAXIM INTEGRATED PRODUCTS - MAX6710BUT+T - Supervisor, Active-Low, Open-Drain, 4 Monitors, 2 V to 5.5 V supply, 200 ms delay, SOT-23-6

Analog Devices MAX4837ETT33BD3+T is a 500 mA LDO linear load switch IC in a 6-pin LFCSP-3x3 package, featuring 0.66 A current limit, 165°C thermal shutdown, adjustable threshold, and a single-channel design for power management in portable electronics.

MAXIM INTEGRATED PRODUCTS - MAX6226ALA25+ - VOLT REF, SERIES, 2.5V, -40 TO 125DEG C

RF Mixers MSOP-8 RoHS

MO-187AA, MSOP-8

MAX32625IWY+ is an ultra-low-power 32-bit ARM Cortex-M4 with FPU microcontroller from Analog Devices, featuring 512 KB Flash, 160 KB SRAM, ADC, DMA, and 1.8 V nominal supply in a compact 63-ball WLCSP package for wearable and IoT applications. From $5.40, in stock, worldwide shipping.

The LTC2642ACMS-16#PBF is a single-channel, 16-bit, unbuffered bipolar voltage output DAC from Analog Devices. It features a serial input interface with offset binary coding and operates from ±2.5 V analog output range. Ideal for precision signal generation, industrial control, and test equipment applications.

Analog Comparators uP Dual COMPARATORarator

LDO Voltage Regulators 2A Hi PSRR FT L DO 1.8Vo

DD-5

LDO Voltage Controllers Ultra -Fast Transient Response

Current Sense Amplifiers High Voltage, Bidirectional Current Sense Amplifier

3 X 3 MM, 0.80 MM HEIGHT, ROHS COMPLIANT, MO-220, TQFN-16

Comparator Single ±6V/12V 8-Pin SOIC N T/R

LTC6655LNCHMS8-4.096#PBF is a precision low-noise voltage reference from Analog Devices with 4.096 V output and ultralow noise performance. Key specs include 0.25 ppm/°C temperature coefficient, 1.5 µVp-p noise, and 5 mA output current in MSOP-8 package. Available from stock with worldwide shipping.

LTC6655LNCHMS8-2.5#PBF is a precision 2.5 V voltage reference with an ultra-low temperature drift of 0.25 ppm/°C. Delivers single-output regulation with 5 mA maximum output current in a compact MSOP-8 package. Ideal for high-accuracy ADC and DAC reference applications requiring long-term stability.

ADI

ADI 0.25ppm N, L Drift Prec Refs

RF Receiver 800MHz to 2.7GHz RF Measuring Rcv

ADI

RS-232 Interface IC L Pwr 5V RS232 2x Drvr/Rcv w/ 0.1 F Cap

The LTC6655L is an ultra-precision three-terminal voltage reference delivering 2.5 V with an exceptional 0.25 ppm/°C temperature drift and ±0.05% initial accuracy. It sources up to 5 mA output current from its low-noise architecture and is packaged in an MSOP-8 for space-efficient precision analog designs. Ideal for 24-bit ADC references, precision DACs, and metrology-grade measurement instruments.

ADI

n Wide VIN Range: 2.7V to 40V n Wide VOUT Range: 2.7V to 40V n 0.8A Output Current for VIN ≥ 3.6V, VOUT = 5V n 2A Output Current in Step-Down Operation for VIN ≥ 6V n Programmable Frequency: 100kHz to 2MHz

Analog Devices LTC6655LNCHMS8-5#TRMPBF is a precision 5 V low-noise voltage reference IC in an MSOP-8 package, delivering ultra-low noise of 0.25 µVpp and 2 ppm/°C maximum temperature coefficient for high-accuracy measurement systems. From $4.50 in stock worldwide shipping.

Analog Front End - AFE 14Bit 125Msps Octal AFE w/Dig Demod&JESD

RF Receiver 800MHz to 2.7GHz RF Measuring Rcv

Switching Voltage Regulators Dual Buck 1.2Vo1 3.3Vo2

Switching Voltage Regulators Dual Buck 1.2Vo1, 1.8Vo2

High Speed Operational Amplifiers Quad Current Feedback OA

Analog Devices ADP2442ACPZ is a high-voltage synchronous step-down switching regulator capable of delivering 1 A continuous output current from input voltages up to 36 V, with integrated high-side and low-side switches in a compact QFN package. It is designed for industrial 24 V rail power supplies, distributed point-of-load converters, and automotive accessory circuits.

ADUM6404CRIZ Analog Devices, PCB SMT, 4-Channel Digital Isolator 25MBps, 5 kVrms, 16-Pin SOIC

Isolated Module DC DC Converter 1 Output 3.3V, 5V 100mA 4.5V - 5.5V Input