Search Electronic Components

The ISL8483E and ISL8485E are ESD protected, BiCMOS 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each driver output/receiver input is protected against ±15kV ESD strikes without latch-up. Unlike competitive devices, this Renesas family is specified for 10% tolerance supplies (4. 5V to 5. 5V). The ISL8483E uses slew rate limited drivers that reduce EMI and minimize reflections from improperly terminated transmission lines or unterminated stubs in

SP336ECT-L is an EXAR multiprotocol line transceiver IC. It supports EIA-232, V.11, V.28, EIA-422, and EIA-485 interfaces in a 28-pin SOIC package. Available by inquiry with worldwide shipping support.

Operating frequency : 40MHz; Temperature range : -40 to 85°C; Serial interface : SPI mode 0, mode 3 supported / Dual Output, Dual I/O supported; Sector size : 4K bytes/small sector, 64K bytes/sector; Small sector erase, sector erase, chip erase functions; Page program function (256 bytes / page); Block protect function; Highly reliable read/write Number of rewrite times : 100,000 times Small sector erase time : 40ms (typ), 150ms (max) Sector erase time : 80ms (typ), 250ms (max) Chip erase time : 250ms (typ)

AT25XV041B-XMHV-T is a serial SPI flash memory IC in TSSOP-8 packaging. It provides 4 Mbit density, 85 MHz clocking, and 20-year data retention. From quote-based pricing, it is available by inquiry with worldwide shipping support.

Cypress FM25V02A-GTR is a 256 Kbit nonvolatile serial F-RAM memory IC. It supports 40 MHz operation in an SOIC-8 package. Request quote for embedded memory supply with worldwide shipping.

Linear Technology LT3790EFE#PBF is a synchronous buck-boost switching controller for wide-input DC/DC regulation. It supports 4.7 V to 60 V input, 700 kHz operation, current-mode PWM, and TSSOP-38 packaging. From $TBD, inquiry stock, worldwide shipping.

S8B-PHDSS is an 8-position right-angle shrouded board connector by JST. Key specs: side-entry low-profile design, male contacts, tin termination finish. From inquiry pricing, in stock with worldwide shipping.

Contact Features: Contact Base Material Phosphor Bronze | Wire Contact Termination Area Plating Material Finish Matte | Wire Contact Termination Area Plating Thickness 3 – 5 MICM | Contact Underplating Material Thickness 1.27 MICM | Contact Orientation Straight | Wire Contact Termination Area Plating Material Nickel | Contact Type Pin | Contact Current Rating (Max) 19 AMP | Contact Underplating Material Thickness 50 MICIN | Contact Mating Area Plating Material Thickness 3 – 5 MICIN | Contact Underplatin

ERJ8ENF5601V is a Panasonic ERJ thick-film SMD resistor for precision board-level circuits. It provides 5.6 kOhm resistance, 1% tolerance, 0.25 W rating, and 1206 size. From RFQ pricing, it supports in-stock worldwide shipping.

Memory FRAM

MELF

TO-220, 3 PIN

Schottky Diodes & Rectifiers DIODE SCHOTTKY

Use the download button to access the BAT54LP-7B schematic symbol, PCB footprint, and 3D model.

Thin Film Resistors - SMD 750 OHM .1% 10PPM

SC-90A, 2 PIN

04023C104MAT2A is an AVX surface-mount multilayer ceramic capacitor. It provides 0.1 uF, 25 V rating, X7R dielectric, 20% tolerance, and 0402 size. From quote-based pricing, inquiry-only stock supports worldwide shipping.

AVX 04023C104JAT2A is an SMD multilayer ceramic capacitor. It provides 0.1 uF capacitance, 25 V rating, X7R dielectric, 5% tolerance and 0402 size. From $0.00 in stock worldwide shipping.

703W-00/54 is a Qualtek IEC 320-C14 mains power entry connector receptacle. It has 3 male blades, flange panel mount, through-hole right-angle termination, and Pb-free status. From quoted pricing, in stock worldwide shipping.