Search Electronic Components

Datamate L-Tek: 13+13 Pos Plug DIL Straight 3mm THT Connector no Latches Gold+Tin

LT1800IS5#PBF from Linear Technology is a amplifier for measurement front ends, current sensing, instrumentation, and analog signal chains. Key specifications include 12.6V, 80MHZ, 0A, 5 pins, SOT-23 package/footprint, supporting reliable selection for OEM maintenance, prototyping, and production BOMs. The SOT-23 format supports standard assembly and sourcing workflows.

80MHz 25V/us RRIO Precision Op Amplifier Linear Technology LT1800CS5#TRMPBF Low Power Op Amp, 80MHz Rail-Rail, 2.3 → 12.6 V, 5-Pin TSOT-23

RADIAL LEADED

RADIAL LEADED

Schottky Diodes & Rectifiers 40V Vrrm 1.5A IF 0.49 VFM 25A IFSM

CMS15I40A is a Toshiba Diode Schottky 1.5A 40V 0.49Vf M-FLAT Toshiba CMS15I40A SMT Schottky. Key details include 2 pins, Small Outline Diode Flat Lead packaging, and Diode classification for production BOM review. Request current pricing for stocked supply and worldwide shipping.

SOIC-8

TS78L15CS from Taiwan Semiconductor is a Integrated Circuit for industrial controls, embedded electronics, maintenance sourcing, and production assemblies. Key specifications include 0.3%, 0.15%, 8 pins, SOP package/footprint, supporting reliable selection for OEM maintenance, prototyping, and production BOMs. The SOP format supports standard assembly and sourcing workflows.

THL 10-4811WI from Traco Power is a DC-DC converter for regulated power supplies, embedded rails, industrial modules, and distributed power systems. Key specifications include 10W, 1input, 6 pins, supporting reliable selection for OEM maintenance, prototyping, and production BOMs.

ETTINGER - 13.13.519 - L\TSTIFTE F!R BOHR. 1.1MM PK100

The 14-bit ISL5314 is a complete direct digital synthesizer (DDS) system in a single 48 Ld LQFP package. A 48-bit programmable carrier NCO (numerically controlled oscillator) and a high-speed 14-bit digital-to-analog converter (DAC) are integrated into a stand-alone DDS. The DDS accepts 48-bit center and offset frequency control information via a parallel processor interface. A 40-bit frequency tuning word can also be loaded via an asynchronous serial interface. Modulation control is provided by 3 external

LINEAR TECHNOLOGY - LTC7149IFE#PBF - DC/DC CONV, SYNC BUCK, 3MHZ, TSSOP-28

LINEAR TECHNOLOGY - LTC7149EUFD#PBF - DC/DC CONV, SYNC BUCK, 3MHZ, QFN-28

LINEAR TECHNOLOGY - LTC7149IUFD#PBF - DC/DC CONV, SYNC BUCK, 3MHZ, QFN-28

Infineon BSS138NH6327XTSA2 N-channel MOSFET, 230 mA, 60 V SIPMOS, 3-Pin SOT-23

Infineon,Trans BSS138NH6327 Infineon BSS138NH6327 N-channel MOSFET Transistor, 0.23 A, 60 V, 3-Pin SOT-23

MULTILAYER CERAMIC CHIP CAPACITORS, 1005, Commercial grade, general (Up to 75V)

The 844N255I is a 6-output clock synthesizer designed for wireless infrastructure clock applications. The device uses IDT's fourth generation FemtoClock® NG technology for an optimum of high clock frequency and low phase noise performance, combined with a low power consumption and high power supply noise rejection. The reference frequency is selectable and the following frequency is supported: 25MHz. The synthesizer generates selectable 156.25MHz, 125MHz, 100MHz, 50MHz and 25MHz clock signals. The device is

Non-dissipative internal and adjustable Over Power Protection (OPP) circuits; Frequency Foldback down to 26 kHz and Skip-Cycle in light load conditions; Internal Ramp Compensation; Frequency jittering from full load to skip-cycle; Latch input for OVP and OTP implementations; See NCP1251 for integrated Over Voltage Protection (OVP) monitoring on the Vcc pin