ZXTN19100CFFTA Diodes Inc. Diode (SO Transistor Flat Lead) In Stock
ZXTN19100CFFTA is a Diodes Inc. NPN bipolar junction transistor rated at 100 V collector-emitter voltage and 4.5 A continuous collector current with a minimum DC current gain (hFE) of 130. It is housed in the compact 3-pin SOT-23F flat-lead package for surface-mount assembly in space-constrained power switching circuits. Available on tape and reel for automated SMT production lines.
- Manufacturer
- Diodes Inc.
- Package
- SO Transistor Flat Lead
- Pin Count
- 3
- Lifecycle
- ACTIVE
- Datasheet
- ZXTN19100CFFTA Datasheet PDF
- Category
- Diode
- Price
- From $0.2411(MOQ 100)
- Temp Range
- -55.0°C to 150.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of ZXTN19100CFFTA?
- 100 V VCEO and 4.5 A IC rating enabling medium-power NPN switching and linear regulation in a SOT-23F footprint
- Minimum hFE of 130 ensures high base-drive efficiency, reducing required base current to under 35 mA at full collector load
- 25 pF collector-base capacitance supports fast switching transitions in motor-drive pre-driver and PWM control stages
What is ZXTN19100CFFTA used for?
ZXTN19100CFFTA is used as a medium-power switch in DC motor pre-driver stages, solenoid drivers, and LED lighting ballasts where up to 4.5 A must be switched at voltages up to 100 V from a compact SOT-23F package. Its high hFE of 130 minimum allows a microcontroller GPIO to drive the base through a simple resistor without a buffer stage. The device also suits linear pass transistors in low-dropout regulators and current-source circuits operating in the 24 V to 48 V industrial equipment range.
What are the specifications of ZXTN19100CFFTA?
| Pbfree Code | Yes |
| Factory Lead Time | 12Weeks |
| YTEOL | 4 |
| Collector Current-Max (IC) | 4.5A |
| Collector-Base Capacitance-Max | 25pF |
| Collector-Emitter Voltage-Max | 100V |
| Configuration | SINGLE |
| DC Current Gain-Min (hFE) | 130 |
| JESD-30 Code | R-PDSO-F3 |
| JESD-609 Code | e3 |
| Number of Elements | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE |
| Peak Reflow Temperature (Cel) | 260 |
| Polarity/Channel Type | NPN |
| Power Dissipation-Max (Abs) | 1.5W |
| Qualification Status | Not Qualified |
| Reference Standard | MIL-STD-202 |
| Surface Mount | YES |
| Terminal Finish | MATTE TIN |
| Terminal Form | FLAT |
| Terminal Position | DUAL |
| Transistor Application | SWITCHING |
| Transistor Element Material | SILICON |
| Transition Frequency-Nom (fT) | 150MHz |
| VCEsat-Max | 0.235V |
| Package | SO Transistor Flat Lead |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| Country of Origin | Mainland China |
Where can I find the ZXTN19100CFFTA datasheet?
ZXTN19100CFFTA Datasheet DownloadOfficial datasheet from Diodes Inc.
What are equivalent replacements for ZXTN19100CFFTA?
Compatible alternatives and drop-in replacements for ZXTN19100CFFTA:
suggested
suggested
Frequently Asked Questions
What are the key absolute maximum ratings of ZXTN19100CFFTA for a 48 V motor-driver pre-stage?
ZXTN19100CFFTA has a collector-emitter voltage maximum of 100 V and a continuous collector current of 4.5 A, providing more than 2× voltage headroom above a 48 V supply and enough current to drive high-side gate drivers or medium-power solenoids directly. The collector-base capacitance of 25 pF allows switching transitions fast enough for PWM frequencies up to several hundred kilohertz.
How does the minimum hFE of 130 simplify the base-drive circuit for ZXTN19100CFFTA?
With a minimum DC current gain (hFE) of 130, ZXTN19100CFFTA requires a base current of only about 34 mA to saturate at full 4.5 A collector load. A single 3.3 V or 5 V microcontroller GPIO output can bias the base through a resistor of approximately 100 Ω without an additional buffer transistor, simplifying the drive circuit BOM.
Why choose ZXTN19100CFFTA's SOT-23F package over a TO-92 package for SMT board designs?
The SOT-23F flat-lead package has a footprint of approximately 3 mm × 1.75 mm versus the 5 mm lead-spacing of a TO-92, occupying roughly 70% less PCB area and enabling automated pick-and-place reflow soldering. TO-92 through-hole parts require manual insertion or axial-lead forming, increasing assembly time and cost, while the SOT-23F suits fully automated SMT lines at production volumes above a few hundred units.
When is ZXTN19100CFFTA preferred over a logic-level MOSFET for switching 2 A loads at 24 V?
ZXTN19100CFFTA is preferable when the drive source is a base-current-capable signal above 15 mA and the switching frequency is below 100 kHz, since BJTs tolerate capacitive gate-charge issues that affect some MOSFETs at low gate-drive voltages. At 2 A and 24 V, the BJT's saturation voltage of roughly 200–400 mV is only slightly higher than an equivalent MOSFET's conduction drop, making thermal performance comparable in low-duty-cycle switching applications.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Diodes Inc.
Diodes Inc. is a leading electronic component manufacturer. FindMyChip sources Diodes Inc. ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 100+ | $0.5776 | $57.76 |
| 500+ | $0.4503 | $225.14 |
| 1000+ | $0.4093 | $409.29 |
| 3000+ | $0.3580 | $1074.00 |
| 12000+ | $0.2423 | $2907.12 |
| 24000+ | $0.2411 | $5786.64 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.”
You May Also Like
824013
Würth Elektronik
Diode
RGF1B-E3/67A
Vishay
Diode
1SS184,LF
Toshiba
Diode
1SS181,LF
Toshiba
Diode
CDDFN10-3324P
Bourns
Diode
RF1005TF6S
ROHM Semiconductor
Diode
XZTNI54W
SunLED
Diode
BAS 3010A-03W E6327
Infineon
Diode
5.0SMDJ22A
LITTELFUSE
Diode
5.0SMDJ24A
LITTELFUSE
Diode
SKL34
Diotec
Diode
BAV99SH6327XTSA1
Infineon
Diode
BAV99S
Taiwan Semiconductor
Diode
IDP30E120
Infineon
Diode
IDW100E60
Infineon
Diode
BAS3010B03WE6327HTSA1
Infineon
Diode
1N4148W-G3-08
Vishay
Diode
SMV2019-079LF
Skyworks
Diode
SLK34
Diotec
Diode
SK310A-LTP
Micro Commercial Components (MCC)
Diode
ES1J-LTP
Micro Commercial Components (MCC)
Diode
SBYV28-100-E3/73
Vishay
Diode
BYV28-150-TR
Vishay
Diode
DL4148-TP
Micro Commercial Components (MCC)
Diode