XTPS56637RPAT Texas Instruments Integrated Circuit (Other) In Stock

XTPS56637RPAT is a 4.5 V to 28 V input, 6 A synchronous buck converter with ULQ-mode ultra-light-load efficiency, adjustable 0.6 V to 16 V output, and a 10-pin VSON package from Texas Instruments. Available from stock worldwide.

OBSOLETEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
XTPS56637RPATOther
Quick Facts
Manufacturer
Texas Instruments
Package
Other
Pin Count
13
Lifecycle
OBSOLETE
Category
Integrated Circuit
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of XTPS56637RPAT?

  • 4.5 V to 28 V wide input range and 6 A continuous output current in a compact 10-pin VSON package for multi-rail power designs
  • ULQ-mode ultra-light-load operation extending efficiency at sub-100 mA loads in always-on IoT and industrial systems
  • Adjustable output voltage from 0.6 V to 16 V via external resistor divider covering processor core, I/O, and memory rails
  • PWM control with integrated high-side and low-side MOSFETs delivering high conversion efficiency at up to 2.2 MHz switching frequency

What is XTPS56637RPAT used for?

The XTPS56637RPAT is well suited for 12 V and 24 V rail step-down regulators supplying FPGA core voltages, microprocessor I/O rails, and industrial sensor power in space-constrained PCB designs. Its 4.5 V to 28 V input tolerance makes it directly compatible with 24 V industrial bus supplies, telecom intermediate bus architectures, and automotive 12 V systems. The ULQ-mode light-load efficiency is particularly valuable for always-on subsystems in industrial gateways, smart meters, and battery-backed control units.

What are the specifications of XTPS56637RPAT?

Reach Compliance CodeCompliant
Date Of Intro2019-04-03
YTEOL0
Additional FeatureADJUSTABLE VOUT=(0.6-16 VOLT)
Analog IC - Other TypeSWITCHING REGULATOR
Control TechniquePULSE WIDTH MODULATION
Input Voltage-Max28V
Input Voltage-Min4.5V
Input Voltage-Nom12V
JESD-30 CodeS-PQCC-N10
Number of Functions1
Output Current-Max8.6A
Output Voltage-Max13V
Output Voltage-Min0.6V
Package Body MaterialPLASTIC/EPOXY
Package ShapeSQUARE
Package StyleCHIP CARRIER
Surface MountYES
Switcher ConfigurationBUCK
Switching Frequency-Max500kHz
TechnologyBICMOS
Temperature GradeAUTOMOTIVE
Terminal FormNO LEAD
Terminal PositionQUAD
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8542.39.00.60

Where can I find the XTPS56637RPAT datasheet?

XTPS56637RPAT Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for XTPS56637RPAT?

Compatible alternatives and drop-in replacements for XTPS56637RPAT:

TPS56637RPARTexas Instruments

Switching Regulator, 6A, 500kHz Switching Freq-Max, PQCC10

View Part →

Frequently Asked Questions

What input voltage range does XTPS56637RPAT support and which supply rails is it compatible with?

The XTPS56637RPAT accepts an input voltage from 4.5 V to 28 V, making it compatible with 5 V USB power, 12 V ATX rails, and 24 V industrial bus supplies. With a 6 A output current capability and adjustable output down to 0.6 V, it can serve as a point-of-load regulator for FPGAs and processors drawing significant current from high-voltage rails.

How does ULQ-mode in XTPS56637RPAT improve system-level efficiency in always-on industrial equipment?

ULQ-mode (ultra-light-load quiescent mode) reduces the switching frequency and quiescent current at loads below approximately 100 mA, maintaining converter efficiency above 80% even at standby currents of a few milliamperes. In always-on industrial gateways or smart meters drawing 50 mA at idle from a 12 V rail, this mode can cut standby power loss by more than 50% compared to fixed-frequency operation.

What output voltage range can be configured on XTPS56637RPAT and how is it set?

The XTPS56637RPAT output voltage is adjustable from 0.6 V to 16 V using an external resistor divider connected to the feedback pin. This covers common logic rails including 0.75 V, 1.0 V, 1.2 V, 1.8 V, 2.5 V, 3.3 V, and 5 V, as well as intermediate bus voltages up to 16 V, without changing the switching topology or requiring different hardware.

How does XTPS56637RPAT compare in output current and package size to TPS56339 for a 12 V to 3.3 V conversion?

The XTPS56637RPAT delivers 6 A continuous output versus the 3 A rating of TPS56339, making it more suitable for loads above 3 A such as FPGA I/O banks or multi-channel analog front-ends. Both parts use similar VSON packages, but the XTPS56637RPAT's 10-pin VSON provides a slightly larger thermal pad area to manage the higher 6 A dissipation from a 12 V input rail.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.

MR
Marco Rossi
CTO, AutoDrive Systems, Italy