XPCW1002100S Lantronix Connector (Other) In Stock
Lantronix XPCW1002100S is an 802.11 b/g/n Wi-Fi module in an 18.3 x 26.1 x 3.0 mm SMD package. It integrates a wireless LAN radio and TCP/IP stack for rapid embedded network connectivity. Ideal for IoT devices, industrial controls, and consumer electronics requiring compact wireless integration.
- Manufacturer
- Lantronix
- Package
- Other
- Pin Count
- 76
- Lifecycle
- ACTIVE
- Datasheet
- XPCW1002100S Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Integrated 802.11 b/g/n Wi-Fi radio with on-board TCP/IP stack eliminates external networking chips
- Compact 18.3 x 26.1 x 3.0 mm SMD form factor fits space-constrained embedded designs
- Supports serial-to-Wi-Fi bridging enabling legacy UART devices to connect to wireless networks without firmware changes
Applications
The XPCW1002100S is designed for embedded IoT applications that require compact, low-power wireless connectivity. It suits industrial automation equipment, smart home devices, medical monitors, and consumer electronics seeking reliable 802.11 b/g/n Wi-Fi integration. Its small form factor and integrated stack make it ideal for battery-operated or space-constrained wireless sensor nodes.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What wireless standards does the XPCW1002100S support and at what data rates?
The XPCW1002100S supports IEEE 802.11 b/g/n standards, providing data rates up to 72 Mbps in the 2.4 GHz band. This makes it suitable for applications requiring reliable wireless communication at moderate throughput, such as IoT sensor gateways and industrial control systems that transmit data periodically.
How does the XPCW1002100S integrate into a host system with a UART interface?
The module bridges a UART serial interface to Wi-Fi, allowing host microcontrollers communicating at standard baud rates such as 9600 or 115200 bps to reach a 2.4 GHz wireless network without implementing a TCP/IP stack. The integrated Lantronix firmware handles connection management, reducing host processor overhead significantly.
Which industrial or medical applications benefit from deploying the XPCW1002100S module?
Industrial PLCs, remote patient monitoring devices, and building automation controllers benefit from the XPCW1002100S because it provides 802.11 b/g/n wireless connectivity in a compact 18.3 x 26.1 mm footprint. Its serial-to-Wi-Fi bridging at operating voltages around 3.3 V makes retrofitting legacy wired equipment straightforward and cost-effective.
Related Guides
How to Choose a Digital Potentiometer: AD5204, AD5206, and AD8403 Selection Guide
Compare the AD5204, AD5206, and AD8403 multi-channel SPI digipots by channel count, resistance value, and package to choose the right Analog Devices digital potentiometer for your design.
Jun 21, 2026
AD7745 / AD7746 / AD7747 Capacitance-to-Digital Converter Design Guide
Complete application note for the AD774x CDC family: circuit design, shielding, conversion rate selection, and sourcing guidance for the AD7745, AD7746, and AD7747.
Jun 21, 2026
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
Why Buy from FindMyChip
About Lantronix
Lantronix is a leading electronic component manufacturer. FindMyChip sources Lantronix ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”