VN7010AJ-E STMicroelectronics Integrated Circuit (Small Outline Packages) In Stock
STMicroelectronics VN7010AJ-E is a high-side MOSFET driver in a POWERSSO-16 package with integrated over-current, over-voltage, under-voltage, thermal, and transient protections. It delivers a single-channel sink-capable peripheral driver output for automotive and industrial load switching. Available from authorized distributors with worldwide shipping.
- Manufacturer
- STMicroelectronics
- Package
- Small Outline Packages
- Pin Count
- 16
- Lifecycle
- ACTIVE UNCONFIRMED
- Datasheet
- VN7010AJ-E Datasheet PDF
- Category
- Integrated Circuit
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Comprehensive built-in protection suite covering over-current, over-voltage, under-voltage, transient, and thermal faults for robust automotive load driving
- High-side MOSFET driver architecture in compact POWERSSO-16 with integrated heat slug for efficient thermal dissipation
- Single-function peripheral driver with buffer/inverter-based interface simplifying MCU-to-load interfacing in 12 V automotive systems
Applications
The VN7010AJ-E is designed for automotive body electronics where high-side switching of resistive and inductive loads such as solenoids, relays, and lamp clusters is required from a 12 V rail. Its integrated multi-fault protection eliminates external protection circuitry, making it well-suited for body control modules, seat adjustment controllers, and HVAC actuator drivers operating across the -40 C to 150 C automotive temperature range.
Specifications
| YTEOL | 7.3 |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| JESD-30 Code | R-PDSO-G16 |
| Number of Functions | 1 |
| Output Current Flow Direction | SINK |
| Package Body Material | PLASTIC/EPOXY |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Screening Level | AEC-Q100 |
| Supply Voltage-Max | 28V |
| Supply Voltage-Min | 4V |
| Supply Voltage-Nom | 13V |
| Surface Mount | YES |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Turn-off Time | 100 µs |
| Turn-on Time | 120 µs |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.60 |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What built-in protections does the VN7010AJ-E include for automotive load switching?
The VN7010AJ-E integrates five protection mechanisms: over-current limiting, over-voltage clamp, under-voltage lockout, transient suppression, and thermal shutdown. This suite protects against inductive load spikes and short-circuit conditions on 12 V automotive bus lines without requiring external TVS diodes or fuses on each output channel.
What package does the VN7010AJ-E use and how does it aid thermal management on a PCB?
The VN7010AJ-E is housed in a POWERSSO-16 package, which is a 16-lead small-outline format with an integrated exposed heat slug on the underside. The slug can be soldered directly to a PCB copper pad, allowing junction-to-board thermal resistance well below 10 degrees C per W and supporting continuous high-side switching of loads drawing several amps in compact automotive ECU designs.
Which automotive body electronics systems are best served by the VN7010AJ-E?
The VN7010AJ-E suits high-side load switching in body control modules, power window drivers, seat actuator controllers, and exterior lighting systems operating on a 12 V automotive bus. Its single-channel output with integrated fault protection reduces component count per switched load compared to discrete MOSFET plus protection network solutions.
How does the VN7010AJ-E interface type affect MCU connectivity in a 12 V system?
The VN7010AJ-E uses a buffer/inverter-based peripheral driver interface, meaning a 3.3 V or 5 V logic-level signal from an automotive MCU directly controls the high-side output without a level-shift stage. This simplifies the drive circuit to a single GPIO connection per channel, reducing BOM cost and PCB routing complexity in multi-load body control designs.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About STMicroelectronics
STMicroelectronics is a global semiconductor leader serving customers across the spectrum of electronics applications. ST's products are found in a wide range of applications including automotive, industrial, personal electronics, and communications.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”