VIPER20(022Y) STMicroelectronics Integrated Circuit (Other) In Stock

VIPER20(022Y) is an STMicroelectronics offline PWM current-mode switching regulator IC in a PENTAWATT HV-5 package, integrating an 800 V avalanche-rated power MOSFET with a PWM controller for flyback and forward converter topologies. It accepts a 9–15 V bias supply and delivers regulated output power up to 8 W. Available in a through-hole 5-pin package with worldwide distribution.

OBSOLETEIntegrated CircuitVerified Jul 2026
Package / Visual Reference
VIPER20(022Y)Other
Quick Facts
Manufacturer
STMicroelectronics
Package
Other
Pin Count
5
Lifecycle
OBSOLETE
Category
Integrated Circuit
Price
From $1.0500(MOQ 1)
Temp Range
?°C to 100.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • Integrated 800 V avalanche-rated power MOSFET with current-mode PWM controller in a single 5-pin package
  • 9 V to 15 V bias input range with internal startup and soft-start for reliable offline power supply design
  • Cycle-by-cycle current limiting and thermal shutdown for robust short-circuit and overload protection
  • PENTAWATT HV-5 package with exposed metal tab enables direct heatsink mounting for up to 8 W output power

Applications

VIPER20(022Y) is used in low-power offline flyback power supplies for industrial controls, appliance power modules, and auxiliary supply rails in motor drives operating from 85–265 VAC mains. Its integrated high-voltage MOSFET and PWM controller reduce component count versus discrete designs, simplifying compliance with IEC 62368 and EN55032 EMC requirements. It is also deployed in standby power supplies for white goods and set-top boxes where a compact 8 W regulated rail is needed.

Specifications

YTEOL0
Analog IC - Other TypeSWITCHING REGULATOR
Control ModeCURRENT-MODE
Control TechniquePULSE WIDTH MODULATION
Input Voltage-Max15V
Input Voltage-Min9V
Input Voltage-Nom13V
JESD-30 CodeR-PZFM-T5
JESD-609 Codee3
Number of Functions1
Output Current-Max0.9A
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeZIP5,.1,.12,100TB
Package ShapeRECTANGULAR
Package StyleFLANGE MOUNT
Qualification StatusNot Qualified
Supply Current-Max (Isup)16mA
Surface MountNO
Switcher ConfigurationSINGLE
Switching Frequency-Max200kHz
TechnologyMOS
Terminal FinishMATTE TIN
Terminal FormTHROUGH-HOLE
Terminal Pitch2.54mm
Terminal PositionZIG-ZAG
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8542.39.00.60

Datasheet

VIPER20(022Y) Datasheet Download

Official datasheet from STMicroelectronics

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What input voltage range and maximum output power does VIPER20(022Y) support in a flyback converter?

VIPER20(022Y) accepts a bias supply of 9 V to 15 V and the integrated 800 V MOSFET allows operation from universal mains (85–265 VAC). In a single-output flyback topology it can deliver up to 8 W of regulated DC output power, making it suitable for auxiliary rails in industrial equipment and consumer appliances.

How does the current-mode PWM control in VIPER20(022Y) improve load transient response versus voltage-mode designs?

Current-mode PWM control in VIPER20(022Y) senses peak drain current on a cycle-by-cycle basis and compares it against the error amplifier output, reducing the feedback loop to a single pole at low frequencies. This provides a 6–10 dB improvement in line rejection and 2x faster load transient response compared to voltage-mode controllers, allowing output capacitance to be reduced by up to 30% while maintaining 5% load regulation.

Which protection features in VIPER20(022Y) make it suitable for unattended industrial power supplies?

VIPER20(022Y) includes cycle-by-cycle peak current limiting that clamps the drain current below 1.5 A, thermal shutdown that activates above 150°C junction temperature, and an 800 V avalanche-rated MOSFET that absorbs unclamped inductive energy. These three protection mechanisms allow the device to survive continuous short-circuit and open-loop fault conditions without requiring an external MOSFET or crowbar circuit.

When is VIPER20(022Y) preferred over a discrete MOSFET plus controller solution for a 5 W auxiliary supply?

For auxiliary supplies under 8 W, VIPER20(022Y) integrates the 800 V power MOSFET, gate driver, oscillator, and current sense into a single 5-pin PENTAWATT package, reducing the BOM by 8–12 components versus a discrete solution. This lowers assembly cost by approximately 20% and shrinks the power stage footprint by 40%, while the internal gate resistor eliminates the need for external gate drive tuning to meet CISPR 32 Class B radiated emissions limits.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About STMicroelectronics

STMicroelectronics is a global semiconductor leader serving customers across the spectrum of electronics applications. ST's products are found in a wide range of applications including automotive, industrial, personal electronics, and communications.

AvailabilityIn Stock
Reference Price (USD)
From $1.0500
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$2.5000$2.50
194+$2.4083$467.21
481+$1.1500$553.15
871+$1.0500$914.55
pcs
Unit price: $2.5000 · Total: $2.50

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India