UVR1V222MHD Nichicon Capacitor Polarised (Capacitor, Polarized Radial Diameter) In Stock
Nichicon UVR1V222MHD is a 2200 µF 35 V aluminum electrolytic capacitor in a 16 mm radial through-hole package, offering 2.31 mA leakage current and wet aluminum dielectric construction for power supply filtering and energy storage in industrial and consumer equipment.
- Manufacturer
- Nichicon
- Package
- Capacitor, Polarized Radial Diameter
- Pin Count
- 2
- Lifecycle
- ACTIVE
- Datasheet
- UVR1V222MHD Datasheet PDF
- Category
- Capacitor Polarised
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 2200 µF high capacitance for bulk energy storage and power supply decoupling
- 35 V voltage rating suitable for 24 V and lower DC power rail filtering
- 16 mm diameter radial through-hole package for standard PCB mounting and low-cost assembly
- Wet aluminum electrolytic construction providing high capacitance density at low cost
- Lead-free (RoHS Pb-free) contacts compliant with IPC-J-STD-020 soldering requirements
Applications
The UVR1V222MHD is commonly used as a bulk decoupling and energy storage capacitor in AC-DC power supply output stages, DC bus filtering for motor drives, and hold-up circuits in industrial control equipment and consumer electronics. Its 2200 µF capacitance and 16 mm radial package make it a practical choice for through-hole power boards where large capacitance values are needed to minimize output voltage ripple on 12 V to 35 V rails.
Specifications
| Pbfree Code | Yes |
| Reach Compliance Code | Not Compliant |
| YTEOL | 7 |
| Capacitance | 2200 µF |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| Diameter | 16mm |
| Dielectric Material | ALUMINUM (WET) |
| JESD-609 Code | e2 |
| Leakage Current | 2.31mA |
| Mounting Feature | THROUGH HOLE MOUNT |
| Negative Tolerance | 20% |
| Package Shape | CYLINDRICAL PACKAGE |
| Package Style | Radial |
| Packing Method | BULK |
| Polarity | POLARIZED |
| Positive Tolerance | 20% |
| Rated (DC) Voltage (URdc) | 35V |
| Ripple Current | 1800mA |
| Surface Mount | NO |
| Tan Delta | 0.16 |
| Terminal Finish | Matte Tin/Copper (Sn/Cu) |
| Terminal Pitch | 7.5mm |
| Terminal Shape | WIRE |
| Package | Capacitor, Polarized Radial Diameter |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8532.22.00 |
| Country of Origin | Japan, Malaysia |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What capacitance and voltage rating does the Nichicon UVR1V222MHD provide for power supply filtering?
The UVR1V222MHD is rated at 2200 µF capacitance with a 35 V maximum working voltage, making it well-suited for bulk decoupling and output ripple reduction on 12 V, 24 V, and lower-voltage DC power rails in industrial power supplies.
How does the 16 mm diameter radial package of UVR1V222MHD affect PCB layout in a power converter design?
The 16 mm diameter through-hole body requires a pad spacing and board clearance area to accommodate the capacitor height and diameter. Designers should allow at least 17 mm of vertical clearance above the PCB and position the 16 mm footprint away from heat sources to maintain rated capacitance over the component's expected lifetime.
What leakage current should engineers budget for when using UVR1V222MHD in a precision power design?
Nichicon specifies 2.31 mA maximum leakage current for the UVR1V222MHD, which represents a small but measurable quiescent load on the power rail. Designs with tight efficiency targets or battery-powered hold-up circuits should factor this 2.31 mA leakage into their power budget when the capacitor is continuously charged at 35 V.
What does the REACH non-compliance notation on UVR1V222MHD mean for export-controlled designs?
The Reach Compliance Code listed as Not Compliant indicates the UVR1V222MHD may contain SVHC substances above the 0.1% weight threshold required for REACH disclosure. Procurement and compliance teams for products shipped into the EU must account for this when submitting substance declarations or should qualify a REACH-compliant 2200 µF 35 V alternative if full regulatory clearance is required.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About Nichicon
Nichicon is a leading electronic component manufacturer. FindMyChip sources Nichicon ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Nichicon
UCM1C102MNL1GS
Capacitor Al Electrolytic
Capacitor Polarised
UVR2G100MHD
Capacitor, Polarized Radial Diameter
Capacitor Polarised
UVY1E221MED1TD
Capacitor, Polarized Radial Diameter
Capacitor Polarised
UVZ1J470MED
Other
Capacitor Polarised
UES1E330MPM
Capacitor, Polarized Radial Diameter
Capacitor Polarised
UUR1H221MNL1GS
Capacitor Al Electrolytic
Capacitor Polarised
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.”