ULN2002A STMicroelectronics Integrated Circuit (Dual-In-Line Packages) In Stock

The ULN2002A is a 7-channel Darlington transistor array peripheral driver with open-collector outputs and built-in flyback diodes in a 16-pin DIP package. Each channel sinks current to drive relays, motors, and solenoids. Available from stock with worldwide shipping.

ACTIVEIntegrated CircuitVerified May 2026
Package / Visual Reference
ULN2002ADual-In-Line Packages
Quick Facts
Manufacturer
STMicroelectronics
Package
Dual-In-Line Packages
Pin Count
16
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $0.2160(MOQ 20)
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ULN2002A?

  • 7 independent Darlington driver channels with open-collector sink outputs, each capable of driving inductive loads up to 50 V
  • Integrated transient suppression (flyback) diodes on every output channel, eliminating the need for external protection diodes on relay and solenoid drivers
  • DIP-16 through-hole package allowing direct breadboard insertion for rapid prototyping of motor, relay, and LED driving circuits

What is ULN2002A used for?

The ULN2002A is used to interface low-power microcontroller or logic outputs to high-current inductive loads such as relays, stepper motor windings, solenoids, and LED arrays in industrial and consumer electronics. Its 7-channel architecture allows a single IC to drive an entire relay bank or a full stepper motor phase set from standard 5 V TTL or CMOS logic signals. It is also common in home automation controllers, PLC output modules, and printer head drivers where multiple loads must be independently switched.

What are the specifications of ULN2002A?

Factory Lead Time10Weeks
YTEOL5.62
Built-in ProtectionsTRANSIENT
Driver Number of Bits7
Interface IC TypeBUFFER OR INVERTER BASED PERIPHERAL DRIVER
JESD-30 CodeR-PDIP-T16
JESD-609 Codee4
Number of Functions1
Output CharacteristicsOPEN-COLLECTOR
Output Current Flow DirectionSINK
Output Peak Current Limit-Nom0.5A
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeDIP16,.3
Package ShapeRECTANGULAR
Package StyleIN-LINE
Peak Reflow Temperature (Cel)NOT SPECIFIED
Supply Voltage-Max13V
Surface MountNO
Terminal FinishNickel/Palladium/Gold (Ni/Pd/Au)
Terminal FormTHROUGH-HOLE
Terminal Pitch2.54mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)NOT SPECIFIED
Turn-off Time1 µs
Turn-on Time1 µs
PackageDual-In-Line Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8542.39.00.60
Country of OriginMainland China

Where can I find the ULN2002A datasheet?

ULN2002A Datasheet Download

Official datasheet from STMicroelectronics

What are equivalent replacements for ULN2002A?

Compatible alternatives and drop-in replacements for ULN2002A:

ULN2002ANE4Texas Instruments

Buffer/Inverter Based Peripheral Driver, 7 Driver, 0.5A, BIPolar, PDIP16

View Part →
ULN2002D1013TRSTMicroelectronics

Buffer/Inverter Based Peripheral Driver, 7 Driver, 0.5A, PDSO16

View Part →

Frequently Asked Questions

How many channels does the ULN2002A provide and what types of loads can each channel drive?

The ULN2002A contains 7 independent Darlington driver channels, each with an open-collector output that can sink current to drive relays, solenoids, stepper motor coils, and LED strings operating at up to 50 V. Each channel handles up to 500 mA continuous sink current, sufficient for most small relays and illumination loads in industrial control panels.

Why does the ULN2002A include built-in flyback diodes and when are external diodes still needed?

Inductive loads like relay coils generate voltage spikes when switched off due to stored magnetic energy. The ULN2002A has integrated transient suppression diodes on every output channel, clamping these spikes and protecting both the driver and the controlling MCU. External diodes are generally not required for loads operating below the 50 V clamp voltage, but may still be added for very high-energy solenoids above 50 V.

How does a designer connect the ULN2002A between a 3.3 V MCU and a 12 V relay coil?

The ULN2002A input pins are driven directly from 3.3 V or 5 V logic outputs; the open-collector outputs then connect to one end of the 12 V relay coil, with the coil's other end tied to the 12 V rail. The COM pin is connected to the 12 V supply for the internal flyback diodes to clamp inductive kickback. No additional components are required for standard 12 V relay coils drawing under 500 mA.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About STMicroelectronics

STMicroelectronics is a global semiconductor leader serving customers across the spectrum of electronics applications. ST's products are found in a wide range of applications including automotive, industrial, personal electronics, and communications.

AvailabilityIn Stock
Reference Price (USD)
From $0.2160
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
20+$0.4900$9.80
100+$0.2737$27.37
500+$0.2485$124.25
1000+$0.2161$216.10
10000+$0.2160$2160.00
pcs
Unit price: $0.4900 · Total: $9.80

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.

TM
Thomas Mueller
Hardware Lead, SensorTech GmbH, Germany