UCM1H331MNL1GSAlternatives & Equivalent Parts
About UCM1H331MNL1GS
UCM1H331MNL1GS is a Capacitor Polarised component manufactured by Nichicon. It comes in a Capacitor Al Electrolytic package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 5 alternatives for UCM1H331MNL1GS — response within 24 hours.
Specification Comparison
| Parameter | UCM1H331MNL1GSSource | CR0603-JW-101ELF | TLV751180280PDSQR | LM7171AIM/NOPB | SN74HC393D | PCF8574P |
|---|---|---|---|---|---|---|
| Manufacturer | Nichicon | Bourns | Texas Instruments | Texas Instruments | Texas Instruments | PHILIPS |
| Package Type | Capacitor Al Electrolytic | Resistor Chip | Small Outline No-lead | Small Outline Packages | — | Dual-In-Line Packages |
| Pin Count | 2 | 2 | 11 | 8 | — | 16 |
| Temperature Range | -55.0°C ~ 105.0°C | -55.0°C ~ 155.0°C | — | -40.0°C ~ 85.0°C | — | -40.0°C ~ 85.0°C |
| Price | $0.3930 | $0.0020 | $0.1740 | $1.9400 | $0.2850 | $0.4302 |
| Stock | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | ACTIVE | ACTIVE | ACTIVE | OBSOLETE | ACTIVE | OBSOLETE |
| Electrical Parameters | ||||||
| Reach Compliance Code | Not Compliant | Compliant | — | — | — | — |
| YTEOL | 7 | 12 | 15 | 0 | — | 0 |
| Additional Feature | RIPPLE CURRENT IS MEASURED AT 100 KHZ | — | — | — | — | — |
| Capacitance | 330 µF | — | — | — | — | — |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR | — | — | — | — | — |
| Diameter | 10 mm | — | — | — | — | — |
| Dielectric Material | ALUMINUM (WET) | — | — | — | — | — |
| Height | 10 mm | — | — | — | — | — |
| JESD-609 Code | e3 | e3 | e4 | e3 | — | e4 |
| Leakage Current | 0.165 mA | — | — | — | — | — |
| Mounting Feature | SURFACE MOUNT | SURFACE MOUNT | — | — | — | — |
| Negative Tolerance | 20% | — | — | — | — | — |
| Package Shape | CYLINDRICAL PACKAGE | — | SQUARE | RECTANGULAR | — | RECTANGULAR |
| Package Style | SMT | SMT | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE | SMALL OUTLINE | — | IN-LINE |
| Packing Method | TR, 15 INCH | TR, PAPER, 7 INCH | TR, 7 INCH | TUBE | — | — |
| Polarity | POLARIZED | — | — | — | — | — |
| Positive Tolerance | 20% | — | — | — | — | — |
| Rated (DC) Voltage (URdc) | 50 V | — | — | — | — | — |
| Reference Standard | AEC-Q200 | — | — | — | — | — |
| Ripple Current | 450 mA | — | — | — | — | — |
| Size Code | 4141 | 0603 | — | — | — | — |
| Surface Mount | YES | YES | YES | YES | — | NO |
| Tan Delta | 0.1 | — | — | — | — | — |
| Terminal Finish | Tin (Sn) | TIN OVER NICKEL | Nickel/Palladium/Gold (Ni/Pd/Au) | Matte Tin (Sn) | — | NICKEL PALLADIUM GOLD |
| Terminal Shape | FLAT | WRAPAROUND | — | — | — | — |
| Pbfree Code | — | Yes | Yes | — | — | Yes |
| Factory Lead Time | — | 12 Weeks | — | — | — | — |
| Construction | — | Rectangular | — | — | — | — |
| Package Height | — | 0.45 mm | — | — | — | — |
| Package Length | — | 1.6 mm | — | — | — | — |
| Package Width | — | 0.8 mm | — | — | — | — |
| Rated Power Dissipation (P) | — | 0.1 W | — | — | — | — |
| Rated Temperature | — | 70 °C | — | — | — | — |
| Resistance | — | 100 Ω | — | — | — | — |
| Resistor Type | — | FIXED RESISTOR | — | — | — | — |
| Technology | — | METAL GLAZE/THICK FILM | — | BIPOLAR | — | CMOS |
| Temperature Coefficient | — | 200 ppm/°C | — | — | — | — |
| Tolerance | — | 5% | — | — | — | — |
| Working Voltage | — | 75 V | — | — | — | — |
| Date Of Intro | — | — | 2020-04-09 | — | — | — |
| Adjustability | — | — | FIXED | — | — | — |
| Dropout Voltage1-Max | — | — | 0.19 V | — | — | — |
| Dropout Voltage1-Nom | — | — | 0.13 V | — | — | — |
| Dropout Voltage2-Max | — | — | 0.14 V | — | — | — |
| Input Voltage Absolute-Max | — | — | 6.5 V | — | — | — |
| Input Voltage-Max | — | — | 6 V | — | — | — |
| Input Voltage-Min | — | — | 2.3 V | — | — | — |
| JESD-30 Code | — | — | S-PDSO-N10 | R-PDSO-G8 | — | R-PDIP-T16 |
| Number of Functions | — | — | 1 | 1 | — | — |
| Number of Outputs | — | — | 2 | — | — | — |
| Operating Temperature TJ-Max | — | — | 125 °C | — | — | — |
| Operating Temperature TJ-Min | — | — | -40 °C | — | — | — |
| Output Current1-Max | — | — | 0.5 A | — | — | — |
| Output Current2-Max | — | — | 0.5 A | — | — | — |
| Output Voltage1-Max | — | — | 1.827 V | — | — | — |
| Output Voltage1-Min | — | — | 1.773 V | — | — | — |
| Output Voltage1-Nom | — | — | 1.8 V | — | — | — |
| Output Voltage2-Max | — | — | 2.842 V | — | — | — |
| Output Voltage2-Min | — | — | 2.758 V | — | — | — |
| Output Voltage2-Nom | — | — | 2.8 V | — | — | — |
| Package Body Material | — | — | PLASTIC/EPOXY | PLASTIC/EPOXY | — | PLASTIC/EPOXY |
| Package Equivalence Code | — | — | SOLCC10,.08,16 | SOP8,.25 | — | DIP16,.3 |
| Peak Reflow Temperature (Cel) | — | — | 260 | 260 | — | 245 |
| Regulator Type | — | — | FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR | — | — | — |
| Terminal Form | — | — | NO LEAD | GULL WING | — | THROUGH-HOLE |
| Terminal Pitch | — | — | 0.4 mm | 1.27 mm | — | 2.54 mm |
| Terminal Position | — | — | DUAL | DUAL | — | DUAL |
| Time@Peak Reflow Temperature-Max (s) | — | — | 30 | NOT SPECIFIED | — | — |
| Voltage Tolerance-Max | — | — | 1.5% | — | — | — |
| Amplifier Type | — | — | — | OPERATIONAL AMPLIFIER | — | — |
| Architecture | — | — | — | VOLTAGE-FEEDBACK | — | — |
| Average Bias Current-Max (IIB) | — | — | — | 10 µA | — | — |
| Bandwidth (3dB)-Nom | — | — | — | 140 MHz | — | — |
| Bias Current-Max (IIB) @25C | — | — | — | 10 µA | — | — |
| Common-mode Reject Ratio-Min | — | — | — | 75 dB | — | — |
| Common-mode Reject Ratio-Nom | — | — | — | 105 dB | — | — |
| Frequency Compensation | — | — | — | YES (AVCL>=2) | — | — |
| Input Offset Current-Max (IIO) | — | — | — | 4 µA | — | — |
| Input Offset Voltage-Max | — | — | — | 1000 µV | — | — |
| Low-Bias | — | — | — | NO | — | — |
| Low-Offset | — | — | — | NO | — | — |
| Micropower | — | — | — | NO | — | — |
| Neg Supply Voltage Limit-Max | — | — | — | -18 V | — | — |
| Neg Supply Voltage-Nom (Vsup) | — | — | — | -5 V | — | — |
| Power | — | — | — | NO | — | — |
| Programmable Power | — | — | — | NO | — | — |
| Qualification Status | — | — | — | Not Qualified | — | Not Qualified |
| Slew Rate-Nom | — | — | — | 4100 V/us | — | — |
| Supply Current-Max | — | — | — | 8.5 mA | — | 0.1 mA |
| Supply Voltage Limit-Max | — | — | — | 18 V | — | — |
| Supply Voltage-Nom (Vsup) | — | — | — | 5 V | — | — |
| Temperature Grade | — | — | — | INDUSTRIAL | — | INDUSTRIAL |
| Unity Gain BW-Nom | — | — | — | 200000 | — | — |
| Voltage Gain-Min | — | — | — | 2200 | — | — |
| Wideband | — | — | — | YES | — | — |
| ## LM7171AIM/NOPB Alternates Showing results | — | — | — | Image | — | — |
| Clock Frequency-Max | — | — | — | — | — | 0.1 MHz |
| Number of Bits | — | — | — | — | — | 8 |
| Number of I/O Lines | — | — | — | — | — | 8 |
| Number of Ports | — | — | — | — | — | 1 |
| Supply Voltage-Max | — | — | — | — | — | 6 V |
| Supply Voltage-Min | — | — | — | — | — | 2.5 V |
| Supply Voltage-Nom | — | — | — | — | — | 5 V |
| uPs/uCs/Peripheral ICs Type | — | — | — | — | — | PARALLEL IO PORT, GENERAL PURPOSE |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 5 alternatives for UCM1H331MNL1GS — response within 24 hours.
Quick Links
Why Look for Alternatives?
Finding alternatives for UCM1H331MNL1GS is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating UCM1H331MNL1GS replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for UCM1H331MNL1GS. Get expert recommendations within 24 hours.
FAQ
What is equivalent to UCM1H331MNL1GS?
Known equivalents for UCM1H331MNL1GS include CR0603-JW-101ELF, TLV751180280PDSQR, LM7171AIM/NOPB. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of UCM1H331MNL1GS?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify UCM1H331MNL1GS alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.