TYS6028101M-10 Laird Performance Materials Inductor (Other) In Stock
Laird Performance Materials TYS6028101M-10 is a 100 µH, ±20% tolerance SMD power inductor in a 6.0 mm × 2.8 mm shielded package rated for -40°C to +125°C operation. Designed for DC-DC converter filtering and energy storage in demanding industrial and automotive environments. From $1.80 in stock with worldwide shipping.
- Manufacturer
- Laird Performance Materials
- Package
- Other
- Pin Count
- 2
- Lifecycle
- ACTIVE
- Datasheet
- TYS6028101M-10 Datasheet PDF
- Category
- Inductor
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 100 µH inductance at ±20% tolerance (M-grade) optimized for output filter chokes in low-to-mid frequency DC-DC converters
- Wide -40°C to +125°C operating temperature range qualifying the TYS6028101M-10 for industrial and automotive-grade PCB environments
- Compact shielded 6.0 mm × 2.8 mm SMD package minimizing EMI radiation and allowing dense PCB placement near sensitive analog circuits
- Low DC resistance construction reducing power loss in continuous conduction mode inductor current applications
Applications
The TYS6028101M-10 is suited for output-stage energy storage and ripple filtering in step-down (buck) and step-up (boost) DC-DC converters operating in industrial control systems, automotive infotainment units, and wireless communication modules. Its 100 µH value and wide temperature range make it a reliable choice for low-frequency switching regulators at 50 kHz to 500 kHz where high inductance is needed to achieve low output ripple current at modest load levels.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What inductance value and tolerance does the TYS6028101M-10 provide for DC-DC converter filter design?
The TYS6028101M-10 provides 100 µH inductance with ±20% (M-grade) tolerance, yielding an inductance range of 80 µH to 120 µH. At a 100 kHz switching frequency, a 100 µH output choke limits inductor ripple current to approximately 100 mA per volt of voltage drop across the inductor, suitable for moderate-load buck converters.
Which temperature range qualifies this inductor for industrial or automotive use?
The TYS6028101M-10 is rated for -40°C to +125°C operation, covering the full industrial temperature range (IND) and meeting the minimum requirements of AEC-Q200 automotive passive component qualification. This range accommodates engine compartment or outdoor-exposed PCB locations where ambient temperatures routinely reach 85°C or higher.
How does the shielded package construction benefit EMI performance in noise-sensitive designs?
The shielded 6.0 mm × 2.8 mm package contains the magnetic flux within a closed ferrite core, reducing radiated EMI by approximately 15 dB to 20 dB compared to an unshielded inductor of the same 100 µH value. This suppression is critical when the converter operates within 50 mm of RF receivers, ADC inputs, or audio circuits sensitive to switching noise above 100 kHz.
When should a designer choose TYS6028101M-10 over a lower inductance value such as 10 µH for the same converter topology?
A 100 µH choke is preferred when the switching frequency is at or below 100 kHz and output ripple current must be kept below 5% of DC load current, for example in a 500 mA load converter where a 10x higher inductance reduces peak-to-peak ripple from approximately 250 mA (with 10 µH) down to roughly 25 mA, easing output capacitor requirements and improving load regulation.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About Laird Performance Materials
Laird Performance Materials is a leading electronic component manufacturer. FindMyChip sources Laird Performance Materials ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”