TSX393IPT STMicroelectronics Integrated Circuit (Small Outline Packages) In Stock

TSX393IPT is a micropower dual CMOS comparator with open-drain outputs, operating from 1.8V to 16V supply. Features ultra-low 5µA quiescent current and rail-to-rail input range. Available from stock worldwide with fast shipping.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
TSX393IPTSmall Outline Packages
Quick Facts
Manufacturer
STMicroelectronics
Package
Small Outline Packages
Pin Count
8
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $0.3792(MOQ 100)
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of TSX393IPT?

  • Ultra-low 5 µA quiescent current enables battery-operated and energy-harvesting designs
  • Wide 1.8 V to 16 V supply voltage range supports diverse power architectures
  • Open-drain output configuration allows wired-OR bus connections and flexible logic interfacing

What is TSX393IPT used for?

TSX393IPT is well-suited for portable and battery-powered equipment where minimizing power consumption is critical, such as IoT sensor nodes and wearable devices. Its wide supply range and rail-to-rail inputs make it ideal for threshold detection circuits, window comparators, and signal conditioning in industrial and consumer electronics. The open-drain outputs integrate cleanly into level-shifting or interrupt-driven microcontroller interfaces.

What are the specifications of TSX393IPT?

Factory Lead Time24Weeks
YTEOL8
Amplifier TypeCOMPARATOR
Average Bias Current-Max (IIB)0.0012 µA
Bias Current-Max (IIB) @25C0.00001 µA
Input Offset Voltage-Max6000 µV
JESD-30 CodeR-PDSO-G8
Number of Functions2
Output TypeOPEN-DRAIN
Package Body MaterialPLASTIC/EPOXY
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Packing MethodTR
Peak Reflow Temperature (Cel)NOT SPECIFIED
Response Time-Nom2500ns
Supply Current-Max0.014mA
Supply Voltage Limit-Max18V
Supply Voltage-Nom (Vsup)3V
Surface MountYES
TechnologyCMOS
Temperature GradeAUTOMOTIVE
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)NOT SPECIFIED
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8542.39.00.60
Country of OriginMorocco

Where can I find the TSX393IPT datasheet?

TSX393IPT Datasheet Download

Official datasheet from STMicroelectronics

What are equivalent replacements for TSX393IPT?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What supply voltage range does the TSX393IPT support, and how does it affect system design?

The TSX393IPT operates from 1.8 V to 16 V single supply, giving designers flexibility to run it directly from a 3.3 V MCU rail, a 5 V logic bus, or a 12 V industrial supply without external regulation. This 1.8 V lower limit is especially valuable in battery-powered designs where cell voltage sags over discharge cycles.

How does the 5 µA quiescent current of TSX393IPT compare to standard comparators in always-on sensing applications?

At only 5 µA supply current per comparator, the TSX393IPT consumes roughly 10 to 100 times less power than general-purpose comparators such as LM393, which draws around 400 µA. In a coin-cell IoT node running continuously, this difference translates to months of additional battery life, making TSX393IPT a strong choice for always-on threshold detection.

Which STMicroelectronics package options and temperature grades are available for the TSX393IPT?

TSX393IPT comes in an 8-pin SO-8 (SOIC) package with an industrial temperature grade of -40°C to +125°C. The SO-8 footprint measures approximately 5 mm × 4 mm, making it suitable for compact PCB layouts. ST also offers equivalent devices in other small-outline variants for different board-area constraints.

Can TSX393IPT drive a 3.3 V logic input directly with its open-drain output?

Yes. Because the output is open-drain, a pull-up resistor of typically 10 kΩ to the 3.3 V rail sets the logic high level, making it fully compatible with 3.3 V MCU GPIO inputs. The output can sink up to 15 mA, so values from 1 kΩ to 100 kΩ are practical depending on speed and power trade-offs.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About STMicroelectronics

STMicroelectronics is a global semiconductor leader serving customers across the spectrum of electronics applications. ST's products are found in a wide range of applications including automotive, industrial, personal electronics, and communications.

AvailabilityIn Stock
Reference Price (USD)
From $0.3792
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
100+$0.4600$46.00
16000+$0.3932$6291.36
32000+$0.3861$12353.92
64000+$0.3792$24266.88
pcs
Unit price: $0.4600 · Total: $46.00

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK