TSM1013AIDT STMicroelectronics Integrated Circuit (Small Outline Packages) In Stock
The TSM1013AIDT is a single-channel linear battery charge controller delivering up to 50 mA charge current in a compact 8-pin SOIC package. It integrates all control circuitry for safe constant-current and constant-voltage Li-ion battery charging. Available worldwide with fast shipping from authorized distributors.
- Manufacturer
- STMicroelectronics
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- OBSOLETE
- Datasheet
- TSM1013AIDT Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.2549(MOQ 1)
- Temp Range
- ?°C to 105.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Single-channel linear battery charger with up to 50 mA charge current, integrating all control for CC/CV charging in an 8-pin SOIC
- Fixed-threshold architecture eliminating external voltage dividers and simplifying PCB layout for space-constrained portable designs
- Plastic SOIC-8 package with 0.25-inch pitch compatible with standard SMT assembly processes and low-cost PCB manufacturing
Applications
The TSM1013AIDT is designed for single-cell Li-ion and Li-polymer battery charging in compact portable electronics such as Bluetooth headsets, wearable sensors, and IoT edge nodes where board space is limited. Its linear CC/CV charge architecture with a 50 mA maximum current suits low-capacity batteries in the 100 mAh to 500 mAh range, providing safe and predictable charge termination without firmware control. The 8-pin SOIC footprint and fixed threshold simplify design-in for consumer electronics teams targeting fast time-to-market with minimal external components.
Specifications
| YTEOL | 0 |
| Adjustable Threshold | NO |
| Analog IC - Other Type | LINEAR BATTERY CHARGER |
| JESD-30 Code | R-PDSO-G8 |
| JESD-609 Code | e4 |
| Number of Channels | 1 |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOP8,.25 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE |
| Qualification Status | Not Qualified |
| Supply Current-Max (Isup) | 1mA |
| Supply Voltage-Max (Vsup) | 28V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Supply Voltage-Nom (Vsup) | 18V |
| Surface Mount | YES |
| Temperature Grade | OTHER |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Form | GULL WING |
| Terminal Pitch | 1.27mm |
| Terminal Position | DUAL |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.60 |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the maximum charge current of the TSM1013AIDT, and which battery capacities does it suit best?
The TSM1013AIDT delivers a maximum charge current of 50 mA, which is appropriate for single-cell Li-ion or Li-polymer batteries in the 100 mAh to 500 mAh range, achieving a full charge cycle in 2 to 10 hours depending on capacity. For larger batteries requiring 200 mA or more, a higher-current charge controller would be needed, but the 50 mA rating aligns well with compact IoT sensor and wearable device power budgets.
How does the TSM1013AIDT's fixed-threshold design simplify PCB layout compared to an adjustable battery charger IC?
With a fixed CC/CV threshold, the TSM1013AIDT requires no external resistor divider to set the charge voltage or termination point, reducing external component count by at least 2 resistors per channel and eliminating trimming steps during production. This simplification shrinks the PCB area around the 8-pin SOIC package and removes a potential accuracy drift source over the -40 °C to 85 °C operating temperature range.
For a Bluetooth wearable project, when does the 8-pin SOIC package of the TSM1013AIDT represent the best size-versus-cost trade-off?
The 8-pin SOIC (0.25-inch pitch, SOP8) is larger than a 6-pin SOT-23 but offers wider pad spacing that lowers manual assembly and rework cost for low-to-mid volume production runs of 100 to 10,000 units. When a wearable PCB has at least 5 mm × 4 mm available for the charger section and the project budget does not justify the premium of a wafer-level CSP package, the TSM1013AIDT in SOIC-8 hits the right balance of size, cost, and solderability for consumer-grade wearable electronics.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About STMicroelectronics
STMicroelectronics is a global semiconductor leader serving customers across the spectrum of electronics applications. ST's products are found in a wide range of applications including automotive, industrial, personal electronics, and communications.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.5138 | $0.51 |
| 12500+ | $0.2596 | $3245.50 |
| 17500+ | $0.2572 | $4501.70 |
| 25000+ | $0.2549 | $6373.25 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”