TSM-150-04-L-DV-P SAMTEC Connector (Other) In Stock
SAMTEC TSM-150-04-L-DV-P is a 100-position dual-row 0.100-inch pitch surface-mount terminal strip with low-profile right-angle orientation and pick-and-place compatible packaging for high-density board-to-board or board-to-cable SMT assembly.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 100
- Lifecycle
- ACTIVE
- Datasheet
- TSM-150-04-L-DV-P Datasheet PDF
- Category
- Connector
- Price
- From $4.2400(MOQ 250)
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TSM-150-04-L-DV-P?
- 100-position dual-row 0.100 inch pitch configuration provides 100 circuit connections in a compact surface-mount footprint suitable for dense signal routing on multi-layer PCBs
- Low-profile right-angle SMT orientation (L variant) allows horizontal cable or mating connector egress, reducing vertical clearance requirements inside slim enclosures
- Pick-and-place compatible tape-and-reel packaging (P suffix) enables automated SMT assembly at high throughput volumes without manual placement
What is TSM-150-04-L-DV-P used for?
TSM-150-04-L-DV-P is designed for high-density board-to-cable and board-to-board connections in computing peripherals, telecommunications line cards, and industrial automation controllers where 100 signals must be routed in a surface-mount layout without through-hole drilling. The right-angle low-profile orientation keeps cable harnesses parallel to the PCB surface, simplifying routing in shallow chassis. Tape-and-reel packaging also makes it suitable for high-volume automated SMT lines producing networking switches, server backplanes, or data acquisition modules.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TSM-150-04-L-DV-P datasheet?
TSM-150-04-L-DV-P Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TSM-150-04-L-DV-P?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many positions does TSM-150-04-L-DV-P provide and in what configuration are they arranged?
TSM-150-04-L-DV-P offers 100 positions arranged in a dual-row layout on a 0.100 inch (2.54 mm) pitch, yielding 50 positions per row. This provides 100 independent circuit connections in a single connector, reducing the number of separate connectors needed for high-signal-count cable harnesses in backplane and instrumentation designs.
What does the L and P suffix in TSM-150-04-L-DV-P indicate about its mounting orientation and packaging?
The L suffix denotes a low-profile right-angle mounting orientation where the mating face is perpendicular to the PCB surface and the connector body lies flat, keeping overall height minimal. The P suffix indicates tape-and-reel packaging compatible with automated pick-and-place assembly machines, enabling high-volume SMT production without manual connector placement.
For a telecommunications line card with 100 signals to route, what makes TSM-150-04-L-DV-P a practical SMT alternative to through-hole connectors?
TSM-150-04-L-DV-P uses surface-mount termination, eliminating the need for 100 drilled through-hole vias that would otherwise consume routing channels on inner layers of a high-layer-count PCB. SMT pads can be placed on the outer copper layer only, freeing inner layers for signal routing, and the right-angle orientation at 0.100 inch pitch allows standard IDC ribbon cables or discrete-wire harnesses to exit horizontally from the board edge.
What pitch does TSM-150-04-L-DV-P use and is it compatible with standard ribbon cable connector housings?
TSM-150-04-L-DV-P uses the industry-standard 0.100 inch (2.54 mm) pitch. This matches the most common ribbon cable and socket housing pitch used by dual-row IDC connectors, meaning a wide variety of off-the-shelf 100-position mating cable assemblies from SAMTEC and other manufacturers can connect to this terminal strip without custom tooling or proprietary cable hardware.
When would a designer choose TSM-150-04-L-DV-P over a higher-density 0.050 inch pitch connector for a 100-circuit interface?
When signal currents exceed approximately 1 A per contact or when standard 28 AWG to 26 AWG ribbon cable is already qualified in the cable harness supply chain, the 0.100 inch pitch of TSM-150-04-L-DV-P provides wider contact spacing and larger pad area than 0.050 inch alternatives. This reduces the risk of solder bridges during SMT reflow and simplifies hand-rework of individual contacts on prototype and low-volume production boards.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 250+ | $6.6200 | $1655.00 |
| 500+ | $5.9500 | $2975.00 |
| 1000+ | $4.2400 | $4240.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector