TSM-135-05-H-SH-P-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-135-05-H-SH-P-TR is a 35-position dual-row surface mount terminal strip at 0.100" pitch with shielded housing in single-row vertical orientation. This high-position-count SMT connector suits board-level signal interconnects in industrial and communication equipment. Available in tape-and-reel from stock with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 35
- Lifecycle
- ACTIVE
- Datasheet
- TSM-135-05-H-SH-P-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 35-position dual-row SMT terminal strip at 0.100" (2.54 mm) pitch for high pin-count standard-grid board connections
- Shielded housing provides EMI suppression for noise-sensitive signal lines in dense PCB assemblies
- Tape-and-reel (TR) format enables high-speed automated pick-and-place assembly for cost-efficient volume production
Applications
The TSM-135-05-H-SH-P-TR is suited for high pin-count surface mount signal interconnects in industrial controllers, communication gateway boards, and server backplane modules. Its 35-position dual-row layout at 0.100" pitch provides 70 total contacts within a shielded SMT footprint, accommodating dense bus-level and mixed-signal routing. The tape-and-reel packaging format supports fully automated SMT assembly for production volumes requiring consistent, high-throughput connector placement.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many total contacts does the TSM-135-05-H-SH-P-TR provide, and at what pitch are they spaced?
The TSM-135-05-H-SH-P-TR provides 70 total contacts arranged in 35 positions per row across a dual-row configuration at 0.100" (2.54 mm) pitch. This standard pitch makes it directly compatible with 0.1" grid PCB layouts commonly used in industrial control, embedded computing, and communication hardware designs.
For a motor-drive control board needing shielded I/O connectors, how does the TSM-135-05-H-SH-P-TR compare to unshielded alternatives?
In motor-drive environments where switching frequencies can reach 20 kHz or higher, the shielded housing of the TSM-135-05-H-SH-P-TR attenuates conducted and radiated EMI on the 35-position SMT connector. Unshielded alternatives allow interference to couple into adjacent signal traces, degrading sensor and encoder signals by several millivolts. The TSM-135-05-H-SH-P-TR's shield terminates to PCB ground planes to maintain signal integrity across all 70 contacts.
What assembly method is recommended for the TSM-135-05-H-SH-P-TR, and does its packaging support automated production lines?
The TSM-135-05-H-SH-P-TR uses standard SMT reflow soldering, compatible with lead-free processes up to 260°C peak temperature. Its tape-and-reel (TR) packaging is specifically designed for automated pick-and-place machines, enabling placement rates of thousands of connectors per hour. This makes it well-suited for medium to high-volume production of communication modules and industrial controller boards.
Related Guides
How to Choose a Digital Potentiometer: AD5204, AD5206, and AD8403 Selection Guide
Compare the AD5204, AD5206, and AD8403 multi-channel SPI digipots by channel count, resistance value, and package to choose the right Analog Devices digital potentiometer for your design.
Jun 21, 2026
AD7745 / AD7746 / AD7747 Capacitance-to-Digital Converter Design Guide
Complete application note for the AD774x CDC family: circuit design, shielding, conversion rate selection, and sourcing guidance for the AD7745, AD7746, and AD7747.
Jun 21, 2026
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”